YS-TaS2 and YxLa1-xS-TaS2 (0 ≤ x ≤ 1) Nanotubes: A Family of Misfit Layered Compounds.

We present the analysis of a family of nanotubes (NTs) based on the quaternary misfit layered compound (MLC) YxLa1-xS-TaS2. The NTs were successfully synthesized within the whole range of possible compositions via the chemical vapor transport technique. In-depth analysis of the NTs using electron microscopy and spectroscopy proves the in-phase (partial) substitution of La by Y in the (La,Y)S subsystem and reveals structural changes compared to the previously reported LaS-TaS2 MLC-NTs. The observed structure can be linked to the slightly different lattice parameters of LaS and YS. Raman spectroscopy and infrared transmission measurements reveal the tunability of the plasmonic and vibrational properties. Density-functional theory calculations showed that the YxLa1-xS-TaS2 MLCs are stable in all compositions. Moreover, the calculations indicated that substitution of La by Sc atoms is electronically not favorable, which explains our failed attempt to synthesize these MLC and NTs thereof.

Few-Wall Carbon Nanotube Coils.

While various electronic components based on carbon nanotubes (CNTs) have already been demonstrated, the realization of miniature electromagnetic coils based on CNTs remains a challenge. Coils made of single-wall CNTs with accessible ends for contacting have been recently demonstrated but were found unsuitable to act as electromagnetic coils because of electrical shorting between their turns. Coils made of a few-wall CNT could in principle allow an insulated flow of current and thus be potential candidates for realizing CNT-based electromagnetic coils. However, no such CNT structure has been produced so far. Here, we demonstrate the formation of few-wall CNT coils and characterize their structural, optical, vibrational, and electrical properties using experimental and computational tools. The coils are made of CNTs with 2, 3, or 4 walls. They have accessible ends for electrical contacts and low defect densities. The coil diameters are on the order of one micron, like those of single-wall CNT coils, despite the higher rigidity of few-wall CNTs. Coils with as many as 163 turns were found, with their turns organized in a rippled raft configuration. These coils are promising candidates for a variety of miniature devices based on electromagnetic coils, such as electromagnets, inductors, transformers, and motors. Being chirally and enantiomerically pure few-wall CNT bundles, they are also ideal for fundamental studies of interwall coupling and superconductivity in CNTs.

Nucleation-Controlled Solution Deposition of Silver Nanoplate Architectures for Facile Derivatization and Catalytic Applications.

Due to their distinctive electronic, optical, and chemical properties, metal nanoplates represent important building blocks for creating functional superstructures. Here, a general deposition method for synthesizing Ag nanoplate architectures, which is compatible with a wide substrate range (flexible, curved, or recessed; consisting of carbon, silicon, metals, oxides, or polymers) is reported. By adjusting the reaction conditions, nucleation can be triggered in the bulk solution, on seeds and by electrodeposition, allowing the production of nanoplate suspensions as well as direct surface modification with open-porous nanoplate films. The latter are fully percolated, possess a large, easily accessible surface, a defined nanostructure with {111} basal planes, and expose defect-rich, particularly reactive edges in high density, making them compelling platforms for heterogeneous catalysis, and electro- and flow chemistry. This potential is showcased by exploring the catalytic performance of the nanoplates in the reduction of carbon dioxide, 4-nitrophenol, and hydrogen peroxide, devising two types of microreactors, and by tuning the nanoplate functionality with derivatization reactions.

Synthesis and Characterization of Nanotubes from Misfit (LnS)1+y TaS2 (Ln=Pr, Sm, Gd, Yb) Compounds.

The synthesis and characterization of nanotubes from misfit layered compounds (MLCs) of the type (LnS)1+y TaS2 (denoted here as LnS-TaS2 ; Ln=Pr, Sm, Gd, and Yb), not reported before, are described (the bulk compound YbS-LaS2 was not previously documented). Transmission electron microscopy and selected area electron diffraction showed that the interlayer spacing along the c axis decreased with an increase in the atomic number of the lanthanide atom, which suggested tighter interaction between the LnS layer and TaS2 for the late lanthanides. The Raman spectra of the tubules were studied and compared to those of the bulk MLC compounds. Similar to the bulk MLCs, the Raman spectra could be divided into the low-frequency modes (110-150 cm-1 ) of the LnS lattice and the high-frequency modes (250-400 cm-1 ) of the TaS2 lattice. The Raman spectra indicated that the vibrational lattice modes of the strained layers in the tubes were stiffer than those in the bulk compounds. Furthermore, the modes of the late lanthanides were higher in energy than those of the earlier lanthanides, which suggested larger charge transfer between the LnS and TaS2 layers for the late lanthanides. Polarized Raman measurements showed the expected binodal intensity profile (antenna effect). The intensity ratio of the Raman signal showed that the E2g mode of TaS2 was more sensitive to the light-polarization effect than its A1g mode. These nanotubes are expected to reveal interesting low-temperature quasi-1D transport behavior.

High-Gain 200 ns Photodetectors from Self-Aligned CdS-CdSe Core-Shell Nanowalls.

1D core-shell heterojunction nanostructures have great potential for high-performance, compact optoelectronic devices owing to their high interface area to volume ratio, yet their bottom-up assembly toward scalable fabrication remains a challenge. Here the site-controlled growth of aligned CdS-CdSe core-shell nanowalls is reported by a combination of surface-guided vapor-liquid-solid horizontal growth and selective-area vapor-solid epitaxial growth, and their integration into photodetectors at wafer-scale without postgrowth transfer, alignment, or selective shell-etching steps. The photocurrent response of these nanowalls is reduced to 200 ns with a gain of up to 3.8 × 103 and a photoresponsivity of 1.2 × 103 A W-1 , the fastest response at such a high gain ever reported for photodetectors based on compound semiconductor nanostructures. The simultaneous achievement of sub-microsecond response and high-gain photocurrent is attributed to the virtues of both the epitaxial CdS-CdSe heterojunction and the enhanced charge-separation efficiency of the core-shell nanowall geometry. Surface-guided nanostructures are promising templates for wafer-scale fabrication of self-aligned core-shell nanostructures toward scalable fabrication of high-performance compact photodetectors from the bottom-up.

Tubular Hybrids: A Nanoparticle-Molecular Network.

We report here a new methodology for the formation of freestanding nanotubes composed of individual gold nanoparticles (NPs) cross-linked by coordination complexes or porphyrin molecules using WS2 nanotubes (INT-WS2) as a template. Our method consists of three steps: (i) coverage of these robust inorganic materials with monodispersed and dense monolayers of gold NPs, (ii) formation of a molecular AuNP network by exposing these decorated tubes to solutions containing a ruthenium polypyridyl complex or meso-tetra(4-pyridyl)porphyrin, and (iii) removal of the INT-WS2 template with a hydrogen peroxide solution. Nanoindentation of the template-free AuNP tubes with atomic force microscopy indicates a radial elastic modulus of 4 GPa. The template-free molecular AuNP tubes are characterized using scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and micro-Raman spectroscopy. The methodology provides a convenient and scalable strategy for the realization of molecular AuNP tubes with a defined length and diameter, depending on the dimensions of the template.

Metallic Nanocrystal Ripening on Inorganic Surfaces.

In this paper, we demonstrate the formation of hybrid nanostructures consisting of two distinctive components mainly in a one-to-one ratio. Thermolysis of inorganic nanotubes (INT) and closed-cage, inorganic fullerene-like (IF) nanoparticles decorated with a dense coating of metallic nanoparticles (M = Au, Ag, Pd) results in migration of relatively small NPs or surface-enhanced diffusion of atoms or clusters, generating larger particles (ripening). AuNP growth on the surface of INTs has been captured in real time using in situ electron microscopy measurements. Reaction of the AuNP-decorated INTs with an alkylthiol results in a chemically induced NP fusion process at room temperature. The NPs do not dissociate from the surfaces of the INTs and IFs, but for proximate IFs we observed fusion between AuNPs originating from different IFs.

Surface-Guided CsPbBr3 Perovskite Nanowires on Flat and Faceted Sapphire with Size-Dependent Photoluminescence and Fast Photoconductive Response.

All-inorganic lead halide perovskite nanowires have been the focus of increasing interest since they exhibit improved stability compared to their hybrid organic-inorganic counterparts, while retaining their interesting optical and optoelectronic properties. Arrays of surface-guided nanowires with controlled orientations and morphology are promising as building blocks for various applications and for systematic research. We report the horizontal and aligned growth of CsPbBr3 nanowires with a uniform crystallographic orientation on flat and faceted sapphire surfaces to form arrays with 6-fold and 2-fold symmetries, respectively, along specific directions of the sapphire substrate. We observed waveguiding behavior and diameter-dependent photoluminescence emission well beyond the quantum confinement regime. The arrays were easily integrated into multiple devices, displaying p-type behavior and photoconductivity. Photodetectors based on those nanowires exhibit the fastest rise and decay times for any CsPbBr3-based photodetectors reported so far. One-dimensional arrays of halide perovskite nanowires are a promising platform for investigating the intriguing properties and potential applications of these unique materials.

Tunable porous nanoallotropes prepared by post-assembly etching of binary nanoparticle superlattices.

Self-assembly of inorganic nanoparticles has been used to prepare hundreds of different colloidal crystals, but almost invariably with the restriction that the particles must be densely packed. Here, we show that non-close-packed nanoparticle arrays can be fabricated through the selective removal of one of two components comprising binary nanoparticle superlattices. First, a variety of binary nanoparticle superlattices were prepared at the liquid-air interface, including several arrangements that were previously unknown. Molecular dynamics simulations revealed the particular role of the liquid in templating the formation of superlattices not achievable through self-assembly in bulk solution. Second, upon stabilization, all of these binary superlattices could be transformed into distinct "nanoallotropes"-nanoporous materials having the same chemical composition but differing in their nanoscale architectures.

Bottom-Up Tri-gate Transistors and Submicrosecond Photodetectors from Guided CdS Nanowalls.

Tri-gate transistors offer better performance than planar transistors by exerting additional gate control over a channel from two lateral sides of semiconductor nanowalls (or "fins"). Here we report the bottom-up assembly of aligned CdS nanowalls by a simultaneous combination of horizontal catalytic vapor-liquid-solid growth and vertical facet-selective noncatalytic vapor-solid growth and their parallel integration into tri-gate transistors and photodetectors at wafer scale (cm2) without postgrowth transfer or alignment steps. These tri-gate transistors act as enhancement-mode transistors with an on/off current ratio on the order of 108, 4 orders of magnitude higher than the best results ever reported for planar enhancement-mode CdS transistors. The response time of the photodetector is reduced to the submicrosecond level, 1 order of magnitude shorter than the best results ever reported for photodetectors made of bottom-up semiconductor nanostructures. Guided semiconductor nanowalls open new opportunities for high-performance 3D nanodevices assembled from the bottom up.

Surface-Guided Core-Shell ZnSe@ZnTe Nanowires as Radial p-n Heterojunctions with Photovoltaic Behavior.

The organization of nanowires on surfaces remains a major obstacle toward their large-scale integration into functional devices. Surface-material interactions have been used, with different materials and substrates, to guide horizontal nanowires during their growth into well-organized assemblies, but the only guided nanowire heterostructures reported so far are axial and not radial. Here, we demonstrate the guided growth of horizontal core-shell nanowires, specifically of ZnSe@ZnTe, with control over their crystal phase and crystallographic orientations. We exploit the directional control of the guided growth for the parallel production of multiple radial p-n heterojunctions and probe their optoelectronic properties. The devices exhibit a rectifying behavior with photovoltaic characteristics upon illumination. Guided nanowire heterostructures enable the bottom-up assembly of complex semiconductor structures with controlled electronic and optoelectronic properties.

Synthesis of core-shell single-layer MoS2 sheathing gold nanoparticles, AuNP@1L-MoS2.

Nanoparticles, and more specifically gold nanoparticles (AuNPs), have attracted much scientific and technological interest in the last few decades. Their popularity is attributed to their unique optical, catalytic, electrical and magnetic properties when compared with the bulk. However, one of the main problems with AuNPs is their long-term stability. Two-dimensional materials like MoS2 (WS2) are semiconductors that exhibit a combination of properties which make them suitable for electronic, optical and (photo)catalytic devices. Few-layer MoS2 (WS2) nanoparticles (NPs), and in particular single-layer ones, show intriguing optical and electrical properties which are very different from those of the bulk compounds. Here we demonstrate the synthesis of AuNPs sheathed by a single layer of MoS2 (WS2), i.e. a core-shell nanostructure (AuNP@1L-MoS2). The hybrid NPs exhibit optical properties that are different from those of either constituent and are amenable for modulation via their chemistry, offering a myriad of applications.

Crystallographic Mapping of Guided Nanowires by Second Harmonic Generation Polarimetry.

The growth of horizontal nanowires (NWs) guided by epitaxial and graphoepitaxial relations with the substrate is becoming increasingly attractive owing to the possibility of controlling their position, direction, and crystallographic orientation. In guided NWs, as opposed to the extensively characterized vertically grown NWs, there is an increasing need for understanding the relation between structure and properties, specifically the role of the epitaxial relation with the substrate. Furthermore, the uniformity of crystallographic orientation along guided NWs and over the substrate has yet to be checked. Here we perform highly sensitive second harmonic generation (SHG) polarimetry of polar and nonpolar guided ZnO NWs grown on R-plane and M-plane sapphire. We optically map large areas on the substrate in a nondestructive way and find that the crystallographic orientations of the guided NWs are highly selective and specific for each growth direction with respect to the substrate lattice. In addition, we perform SHG polarimetry along individual NWs and find that the crystallographic orientation is preserved along the NW in both polar and nonpolar NWs. While polar NWs show highly uniform SHG along their axis, nonpolar NWs show a significant change in the local nonlinear susceptibility along a few micrometers, reflected in a reduction of 40% in the ratio of the SHG along different crystal axes. We suggest that these differences may be related to strain accumulation along the nonpolar wires. We find SHG polarimetry to be a powerful tool to study both selectivity and uniformity of crystallographic orientations of guided NWs with different epitaxial relations.

Short Pulse Laser Synthesis of Transition-Metal Dichalcogenide Nanostructures under Ambient Conditions.

The study of inorganic nanometer-scale materials with hollow closed-cage structures, such as inorganic fullerene-like (IF) nanostructures and inorganic nanotubes (INTs), is a rapidly growing field. Numerous kinds of IF nanostructures and INTs were synthesized for a variety of applications, particularly for lubrication, functional coatings, and reinforcement of polymer matrices. To date, such nanostructures have been synthesized mostly by heating a transition metal or oxide thereof in the presence of precursor gases, which are however toxic and hazardous. In this context, one frontier of research in this field is the development of new avenues for the green synthesis of IF structures and INTs, directly from the bulk of layered compounds. In the present work, we demonstrate a simple room-temperature and environmentally friendly approach for the synthesis of IF nanostructures and INTs via ultrashort-pulse laser ablation of a mixture of transition-metal dichalcogenides in bulk form mixed with Pb/PbO, in ambient air. The method can be considered as a synergy of photothermally and photochemically induced chemical transformations. The ultrafast-laser-induced excitation of the material, complemented with the formation of extended hot annealing regions in the presence of the metal catalyst, facilitates the formation of different nanostructures. Being fast, easy, and material-independent, our method offers new opportunities for the synthesis of IF nanostructures and INTs from different bulk metal chalcogenide compounds. On the basis of the capabilities of laser technology as well, this method could advantageously be further developed into a versatile tool for the simultaneous growth and patterning of such nanostructures in preselected positions for a variety of applications.

Guided CdSe Nanowires Parallelly Integrated into Fast Visible-Range Photodetectors.

One-dimensional semiconductor nanostructures, such as nanowires (NWs), have attracted tremendous attention due to their unique properties and potential applications in nanoelectronics, nano-optoelectronics, and sensors. One of the challenges toward their integration into practical devices is their large-scale controlled assembly. Here, we report the guided growth of horizontal CdSe nanowires on five different planes of sapphire. The growth direction and crystallographic orientation are controlled by the epitaxial relationship with the substrate as well as by a graphoepitaxial effect of surface nanosteps and grooves. CdSe is a promising direct-bandgap II-VI semiconductor active in the visible range, with potential applications in optoelectronics. The guided CdSe nanowires were found to have a wurtzite single-crystal structure. Field-effect transistors and photodetectors were fabricated to examine the nanowire electronic and optoelectronic properties, respectively. The latter exhibited the fastest rise and fall times ever reported for CdSe nanostructures as well as a relatively high gain, both features being essential for optoelectronic applications.

Guided Growth of Horizontal p-Type ZnTe Nanowires.

A major challenge toward large-scale integration of nanowires is the control over their alignment and position. A possible solution to this challenge is the guided growth process, which enables the synthesis of well-aligned horizontal nanowires that grow according to specific epitaxial or graphoepitaxial relations with the substrate. However, the guided growth of horizontal nanowires was demonstrated for a limited number of materials, most of which exhibit unintentional n-type behavior. Here we demonstrate the vapor-liquid-solid growth of guided horizontal ZnTe nanowires and nanowalls displaying p-type behavior on four different planes of sapphire. The growth directions of the nanowires are determined by epitaxial relations between the nanowires and the substrate or by a graphoepitaxial effect that guides their growth along nanogrooves or nanosteps along the surface. We characterized the crystallographic orientations and elemental composition of the nanowires using transmission electron microscopy and photoluminescence. The optoelectronic and electronic properties of the nanowires were studied by fabricating photodetectors and top-gate thin film transistors. These measurements showed that the guided ZnTe nanowires are p-type semiconductors and are photoconductive in the visible range. The guided growth of horizontal p-type nanowires opens up the possibility of parallel nanowire integration into functional systems with a variety of potential applications not available by other means.

Defect-Free Carbon Nanotube Coils.

Carbon nanotubes are promising building blocks for various nanoelectronic components. A highly desirable geometry for such applications is a coil. However, coiled nanotube structures reported so far were inherently defective or had no free ends accessible for contacting. Here we demonstrate the spontaneous self-coiling of single-wall carbon nanotubes into defect-free coils of up to more than 70 turns with identical diameter and chirality, and free ends. We characterize the structure, formation mechanism, and electrical properties of these coils by different microscopies, molecular dynamics simulations, Raman spectroscopy, and electrical and magnetic measurements. The coils are highly conductive, as expected for defect-free carbon nanotubes, but adjacent nanotube segments in the coil are more highly coupled than in regular bundles of single-wall carbon nanotubes, owing to their perfect crystal momentum matching, which enables tunneling between the turns. Although this behavior does not yet enable the performance of these nanotube coils as inductive devices, it does point a clear path for their realization. Hence, this study represents a major step toward the production of many different nanotube coil devices, including inductors, electromagnets, transformers, and dynamos.

Solar Synthesis of PbS-SnS2 Superstructure Nanoparticles.

We report the synthesis and supporting density-functional-theory computations for a closed-cage, misfit layered-compound superstructure from PbS-SnS2, generated by highly concentrated sunlight from a precursor mixture of Pb, SnS2, and graphite. The unique reactor conditions created in our solar furnace are found to be particularly conducive to the formation of these nanomaterials. Detailed structural and chemical characterization revealed a spontaneous inside-out formation mechanism, with a broad range of nonhollow fullerene-like structures starting at a diameter of ∼20 nm and a wall thickness of ∼5 layers. The computations also reveal a counterintuitive charge transfer pathway from the SnS2 layers to the PbS layers, which indicates that, in contrast to binary-layered compounds where it is principally van der Waals forces that hold the layers together, polar forces appear to be as important in stabilizing superstructures of misfit layered compounds.

Direct Synthesis of Palladium Catalyst on Supporting WS2 Nanotubes and its Reactivity in Cross-Coupling Reactions.

Palladium nanoparticles were deposited on multiwall WS2 nanotubes. The composite nanoparticles were characterized by a variety of techniques. The Pd nanoparticles were deposited uniformly on the surface of WS2 nanotubes. An epitaxial relationship between the (111) plane of Pd and the (013) plane of WS2 was mostly observed. The composite nanoparticles were found to perform efficiently as catalysts for cross-coupling (Heck and Suzuki) reactions. The role of the nanotubes' support in the catalytic process is briefly discussed.

pH-Dependent Galvanic Replacement of Supported and Colloidal Cu2O Nanocrystals with Gold and Palladium.

Galvanic replacement reactions (GRRs) on nanoparticles (NPs) are typically performed between two metals, i.e., a solid metal NP and a replacing salt solution of a more noble metal. The solution pH in GRRs is commonly considered an irrelevant parameter. Yet, the solution pH plays a major role in GRRs involving metal oxide NPs. Here, Cu(2)O nanocrystals (NCs) are studied as galvanic replacement (GR) precursors, undergoing replacement by gold and palladium, with the resulting nanostructures showing a strong dependence on the pH of the replacing metal salt solution. GRRs are reported for the first time on supported (chemically deposited) oxide NCs and the results are compared with those obtained with corresponding colloidal systems. Control of the pH enables production of different nanostructures, from metal-decorated Cu(2)O NCs to uniformly coated Cu(2)O-in-metal (Cu(2)O@Me) core-shell nanoarchitectures. Improved metal nucleation efficiencies at low pHs are attributed to changes in the Cu(2)O surface charge resulting from protonation of the oxide surface. GR followed by etching of the Cu(2)O cores provides metal nanocages that collapse upon drying; the latter is prevented using a sol-gel silica overlayer stabilizing the metal nanocages. Metal-replaced Cu(2)O NCs and their corresponding stabilized nanostructures may be useful as photocatalysts, electrocatalysts, and nanosensors.