Comparison of Thermal Annealing versus Hydrothermal Treatment Effects on the Detection Performances of ZnO Nanowires.

A comparative investigation of the post-electroplating treatment influence on the gas detecting performances of single ZnO nanorod/nanowire (NR/NW), as grown by electrochemical deposition (ECD) and integrated into nanosensor devices, is presented. In this work, hydrothermal treatment (HT) in a H2O steam and conventional thermal annealing (CTA) in a furnace at 150 °C in ambient were used as post-growth treatments to improve the material properties. Herein, the morphological, optical, chemical, structural, vibrational, and gas sensing performances of the as-electrodeposited and treated specimens are investigated and presented in detail. By varying the growth temperature and type of post-growth treatment, the morphology is maintained, whereas the optical and structural properties show increased sample crystallization. It is shown that HT in H2O vapors affects the optical and vibrational properties of the material. After investigation of nanodevices based on single ZnO NR/NWs, it was observed that higher temperature during the synthesis results in a higher gas response to H2 gas within the investigated operating temperature range from 25 to 150 °C. CTA and HT or autoclave treatment showed the capability of a further increase in gas response of the prepared sensors by a factor of ∼8. Density functional theory calculations reveal structural and electronic band changes in ZnO surfaces as a result of strong interaction with H2 gas molecules. Our results demonstrate that high-performance devices can be obtained with high-crystallinity NWs/NRs after HT. The obtained devices could be the key element for flexible nanoelectronics and wearable electronics and have attracted great interest due to their unique specifications.

Pd-Functionalized ZnO:Eu Columnar Films for Room-Temperature Hydrogen Gas Sensing: A Combined Experimental and Computational Approach.

Reducing the operating temperature to room temperature is a serious obstacle on long-life sensitivity with long-term stability performances of gas sensors based on semiconducting oxides, and this should be overcome by new nanotechnological approaches. In this work, we report the structural, morphological, chemical, optical, and gas detection characteristics of Eu-doped ZnO (ZnO:Eu) columnar films as a function of Eu content. The scanning electron microscopy (SEM) investigations showed that columnar films, grown via synthesis from a chemical solutions (SCS) approach, are composed of densely packed columnar type grains. The sample sets with contents of ∼0.05, 0.1, 0.15, and 0.2 at% Eu in ZnO:Eu columnar films were studied. Surface functionalization was achieved using PdCl2 aqueous solution with additional thermal annealing in air at 650 °C. The temperature-dependent gas-detection characteristics of Pd-functionalized ZnO:Eu columnar films were measured in detail, showing a good selectivity toward H2 gas at operating OPT temperatures of 200-300 °C among several test gases and volatile organic compound vapors, such as methane, ammonia, acetone, ethanol, n-butanol, and 2-propanol. At an operating temperature OPT of 250 °C, a high gas response Igas/Iair of ∼115 for 100 ppm H2 was obtained. Experimental results indicate that Eu doping with an optimal content of about 0.05-0.1 at% along with Pd functionalization of ZnO columns leads to a reduction of the operating temperature of the H2 gas sensor. DFT-based computations provide mechanistic insights into the gas-sensing mechanism by investigating interactions between the Pd-functionalized ZnO:Eu surface and H2 gas molecules supporting the experimentally observed results. The proposed columnar materials and gas sensor structures would provide a special advantage in the fields of fundamental research, applied physics studies, and ecological and industrial applications.

Low-Temperature Solution Synthesis of Au-Modified ZnO Nanowires for Highly Efficient Hydrogen Nanosensors.

In this research, the low-temperature single-step electrochemical deposition of arrayed ZnO nanowires (NWs) decorated by Au nanoparticles (NPs) with diameters ranging between 10 and 100 nm is successfully demonstrated for the first time. The AuNPs and ZnO NWs were grown simultaneously in the same growth solution in consideration of the HAuCl4 concentration. Optical, structural, and chemical characterizations were analyzed in detail, proving high crystallinity of the NWs as well as the distribution of Au NPs on the surface of zinc oxide NWs demonstrated by transmission electron microscopy. Individual Au NPs-functionalized ZnO NWs (Au-NP/ZnO-NWs) were incorporated into sensor nanodevices using an focused ion bean/scanning electron microscopy (FIB/SEM) scientific instrument. The gas-sensing investigations demonstrated excellent selectivity to hydrogen gas at room temperature (RT) with a gas response, Igas/Iair, as high as 7.5-100 ppm for Au-NP/ZnO-NWs, possessing a AuNP surface coverage of ∼6.4%. The concentration of HAuCl4 in the electrochemical solution was observed to have no significant impact on the gas-sensing parameters in our experiments. This highlights the significant influence of the total Au/ZnO interfacial area establishing Schottky contacts for the achievement of high performances. The most significant performance of H2 response was observed for gas concentrations higher than 500 ppm of H2 in the environment, which was attributed to the surface metallization of ZnO NWs during exposure to hydrogen. For this case, an ultrahigh response of about 32.9 and 47 to 1000 and 5000 ppm of H2 was obtained, respectively. Spin-polarized periodic density functional theory calculations were realized on Au/ZnO bulk and surface-functionalized models, validating the experimental hypothesis. The combination of H2 gas detection at RT, ultralow power consumption, and reduced dimensions makes these micro-nanodevices excellent candidates for hydrogen gas leakage detection, including hydrogen gas monitoring (less than 1 ppm).

Tuning ZnO Sensors Reactivity toward Volatile Organic Compounds via Ag Doping and Nanoparticle Functionalization.

Nanomaterials for highly selective and sensitive sensors toward specific gas molecules of volatile organic compounds (VOCs) are most important in developing new-generation of detector devices, for example, for biomarkers of diseases as well as for continuous air quality monitoring. Here, we present an innovative preparation approach for engineering sensors, which allow for full control of the dopant concentrations and the nanoparticles functionalization of columnar material surfaces. The main outcome of this powerful design concept lies in fine-tuning the reactivity of the sensor surfaces toward the VOCs of interest. First, nanocolumnar and well-distributed Ag-doped zinc oxide (ZnO:Ag) thin films are synthesized from chemical solution, and, at a second stage, noble nanoparticles of the required size are deposited using a gas aggregation source, ensuring that no percolating paths are formed between them. Typical samples that were investigated are Ag-doped and Ag nanoparticle-functionalized ZnO:Ag nanocolumnar films. The highest responses to VOCs, in particular to (CH3)2CHOH, were obtained at a low operating temperature (250 °C) for the samples synergistically enhanced with dopants and nanoparticles simultaneously. In addition, the response times, particularly the recovery times, are greatly reduced for the fully modified nanocolumnar thin films for a wide range of operating temperatures. The adsorption of propanol, acetone, methane, and hydrogen at various surface sites of the Ag-doped Ag8/ZnO(0001) surface has been examined with the density functional theory (DFT) calculations to understand the preference for organic compounds and to confirm experimental results. The response of the synergistically enhanced sensors to gas molecules containing certain functional groups is in excellent agreement with density functional theory calculations performed in this work too. This new fabrication strategy can underpin the next generation of advanced materials for gas sensing applications and prevent VOC levels that are hazardous to human health and can cause environmental damages.

Improving gas sensing by CdTe decoration of individual Aerographite microtubes.

Novel gas sensors have been realized by decorating clusters of tubular Aerographite with CdTe using magnetron sputtering techniques. Subsequently, individual microtubes were separated and electrically contacted on a SiO2/Si substrate with pre-patterned electrodes. Cathodoluminescence, electron microscopy and electrical characterization prove the successful formation of a polycrystalline CdTe thin film on Aerographite enabling an excellent gas response to ammonia. Furthermore, the dynamical response to ammonia exposure has been investigated, highlighting the quick response and recovery times of the sensor, which is highly beneficial for extremely short on/off cycles. Therefore, this gas sensor reveals a large potential for cheap, highly selective, reliable and low-power gas sensors, which are especially important for hazardous gases such as ammonia.

PdO/PdO2 functionalized ZnO : Pd films for lower operating temperature H2 gas sensing.

Noble metals and their oxide nano-clusters are considered to be the most promising candidates for fabricating advanced H2 gas sensors. Through this work, we propose a novel strategy to grow and modulate the density of PdO/PdO2 nanoparticles uniformly on nanostructured Pd-doped ZnO (ZnO : Pd) films by a one-step solution approach followed by thermal annealing at 650 °C, and thus to detect ppm-level H2 gas in a selective manner. The gas sensing properties of such hybridized materials showed that the PdO-functionalized ZnO samples offer significantly improved H2 gas sensing properties in an operating temperature range of 25-200 °C. The deposition of ZnO : Pd films via a simple synthesis from chemical solutions (SCS) approach with an aqueous bath (at relatively low temperatures, <95 °C) is reported. Furthermore, the functionalization of palladium oxide nanoclusters by a simple but highly effective approach on ZnO : Pd film surfaces was performed and is reported here for the first time. The morphological, structural, vibrational, optical, chemical, and electronic properties were studied in detail and the mixed phases of palladium oxide nanoclusters on the ZnO surface were found. Sensor studies of the ZnO : Pd samples (in the range of 25-350 °C operating temperature) showed good selectivity to H2 gas, especially in the range of higher temperatures (>150 °C, up to 350 °C); however, the PdO/PdO2 mixed phases of the nanocluster-modified surface ZnO : Pd films showed a much better selectivity to H2 gas, even at a lower operating temperature, in the range of 25-150 °C. For such PdO-functionalized ZnO : Pd films, even at room temperature, a gas response of ∼12.7 to 1000 ppm of H2 gas was obtained, without response to any other reducing gases or tested vapors. The large recovery time of the samples at room temperatures (>500 s) can be drastically reduced by applying higher bias voltages. Furthermore, we propose and discuss the gas sensing mechanism for these structures in detail. Our study demonstrates that surface functionalization with PdO/PdO2 mixed phase nanoclusters-nanoparticles (NPs) is much more effective than only the Pd doping of nanostructured ZnO films for selective sensing applications. This approach will pave a new way for the controlled functionalization of PdO/PdO2 nanoclusters on ZnO : Pd surfaces to the exact detection of highly explosive H2 gas under various atmospheres by using solid state gas sensors.

Buckminsterfullerene hybridized zinc oxide tetrapods: defects and charge transfer induced optical and electrical response.

Buckminster fullerene (C60) based hybrid metal oxide materials are receiving considerable attention because of their excellent fundamental and applied aspects, like semiconducting, electron transfer, luminescent behaviors, etc. and this work briefly discusses the successful fabrication of C60 decorated ZnO tetrapod materials and their detailed structure-property relationships including device sensing applications. The electron microscopy investigations indicate that a quite dense surface coverage of ZnO tetrapods with C60 clusters is achieved. The spectroscopy studies confirmed the identification of the C60 vibrational modes and the C60 induced changes in the absorption and luminescence properties of the ZnO tetrapods. An increased C60 concentration on ZnO results in steeper ZnO bandgap absorption followed by well-defined free exciton and 3.31 eV line emissions. As expected, higher amounts of C60 increase the intensity of C60-related visible absorption bands. Pumping the samples with photons with an energy corresponding to these absorption band maxima leads to additional emission from ZnO showing an effective charge transfer phenomenon from C60 to the ZnO host. The density of states model obtained from DFT studies for pure and C60 coated ZnO surfaces confirms the experimental observations. The fabricated C60-ZnO hybrid tetrapod based micro- and nanodevices showed interesting ethanol gas sensing characteristics.

Sensing performances of pure and hybridized carbon nanotubes-ZnO nanowire networks: A detailed study.

In this work, the influence of carbon nanotube (CNT) hybridization on ultraviolet (UV) and gas sensing properties of individual and networked ZnO nanowires (NWs) is investigated in detail. The CNT concentration was varied to achieve optimal conditions for the hybrid with improved sensing properties. In case of CNT decorated ZnO nanonetworks, the influence of relative humidity (RH) and applied bias voltage on the UV sensing properties was thoroughly studied. By rising the CNT content to about 2.0 wt% (with respect to the entire ZnO network) the UV sensing response is considerably increased from 150 to 7300 (about 50 times). With respect to gas sensing, the ZnO-CNT networks demonstrate an excellent selectivity as well as a high gas response to NH3 vapor. A response of 430 to 50 ppm at room temperature was obtained, with an estimated detection limit of about 0.4 ppm. Based on those results, several devices consisting of individual ZnO NWs covered with CNTs were fabricated using a FIB/SEM system. The highest sensing performance was obtained for the finest NW with diameter (D) of 100 nm,  with a response of about 4 to 10 ppm NH3 vapor at room temperature.

Single and Networked ZnO-CNT Hybrid Tetrapods for Selective Room-Temperature High-Performance Ammonia Sensors.

Highly porous hybrid materials with unique high-performance properties have attracted great interest from the scientific community, especially in the field of gas-sensing applications. In this work, tetrapodal-ZnO (ZnO-T) networks were functionalized with carbon nanotubes (CNTs) to form a highly efficient hybrid sensing material (ZnO-T-CNT) for ultrasensitive, selective, and rapid detection of ammonia (NH3) vapor at room temperature. By functionalizing the ZnO-T networks with 2.0 wt % of CNTs by a simple dripping procedure, an increase of 1 order of magnitude in response (from about 37 to 330) was obtained. Additionally, the response and recovery times were improved (by decreasing them from 58 and 61 s to 18 and 35 s, respectively). The calculated lowest detection limit of 200 ppb shows the excellent potential of the ZnO-T-CNT networks as NH3 vapor sensors. Room temperature operation of such networked ZnO-CNT hybrid tetrapods shows an excellent long-time stability of the fabricated sensors. Additionally, the gas-sensing mechanism was identified and elaborated based on the high porosity of the used three-dimensional networks and the excellent conductivity of the CNTs. On top of that, several single hybrid microtetrapod-based devices were fabricated (from samples with 2.0 wt % CNTs) with the help of the local metal deposition function of a focused ion beam/scanning electron microscopy instrument. The single microdevices are based on tetrapods with arms having a diameter of around 0.35 µm and show excellent NH3 sensing performance with a gas response (Igas/Iair) of 6.4. Thus, the fabricated functional networked ZnO-CNT hybrid tetrapods will allow to detect ammonia and to quantify its concentration in automotive, environmental monitoring, chemical industry, and medical diagnostics.

Localized Synthesis of Iron Oxide Nanowires and Fabrication of High Performance Nanosensors Based on a Single Fe2 O3 Nanowire.

A composed morphology of iron oxide microstructures covered with very thin nanowires (NWs) with diameter of 15-50 nm has been presented. By oxidizing metallic Fe microparticles at 255 °C for 12 and 24 h, dense iron oxide NW networks bridging prepatterned Au/Cr pads are obtained. X-ray photoelectron spectroscopy studies reveal formation of α-Fe2 O3 and Fe3 O4 on the surface and it is confirmed by detailed high-resolution transmission electron microscopy and selected area electron diffraction (SAED) investigations that NWs are single phase α-Fe2 O3 and some domains of single phase Fe3 O4 . Localized synthesis of such nano- and microparticles directly on sensor platform/structure at 255 °C for 24 h and reoxidation at 650 °C for 0.2-2 h, yield in highly performance and reliable detection of acetone vapor with fast response and recovery times. First nanosensors on a single α-Fe2 O3 nanowire are fabricated and studied showing excellent performances and an increase in acetone response by decrease of their diameter was developed. The facile technological approach enables this nanomaterial as candidate for a range of applications in the field of nanoelectronics such as nanosensors and biomedicine devices, especially for breath analysis in the treatment of diabetes patients.

Sacrificial Template Synthesis and Properties of 3D Hollow-Silicon Nano- and Microstructures.

Novel three-dimensional (3D) hollow aero-silicon nano- and microstructures, namely, Si-tetrapods (Si-T) and Si-spheres (Si-S) were synthesized by a sacrificial template approach for the first time. The new Si-T and Si-S architectures were found as most temperature-stable hollow nanomaterials, up to 1000 °C, ever reported. The synthesized aero-silicon or aerogel was integrated into sensor structures based on 3D networks. A single microstructure Si-T was employed to investigate electrical and gas sensing properties. The elaborated hollow microstructures open new possibilities and a wide area of perspectives in the field of nano- and microstructure synthesis by sacrificial template approaches. The enormous flexibility and variety of the hollow Si structures are provided by the special geometry of the sacrificial template material, ZnO-tetrapods (ZnO-T). A Si layer was deposited onto the surface of ZnO-T networks by plasma-enhanced chemical vapor deposition. All samples demonstrated p-type conductivity; hence, the resistance of the sensor structure increased after introducing the reducing gases in the test chamber. These hollow structures and their unique and superior properties can be advantageous in different fields, such as NEMS/MEMS, batteries, dye-sensitized solar cells, gas sensing in harsh environment, and biomedical applications. This method can be extended for synthesis of other types of hollow nanostructures.

Direct Growth of Freestanding ZnO Tetrapod Networks for Multifunctional Applications in Photocatalysis, UV Photodetection, and Gas Sensing.

Growth of freestanding nano- and microstructures with complex morphologies is a highly desired aspect for real applications of nanoscale materials in various technologies. Zinc oxide tetrapods (ZnO-T), which exhibit three-dimensional (3D) shapes, are of major importance from a technological applications point of view, and thus efficient techniques for growth of different varieties of tetrapod-based networks are demanded. Here, we demonstrate the versatile and single-step synthesis of ZnO-T with different arm morphologies by a simple flame transport synthesis (FTS) approach, forming a network. Morphological evolutions and structural intactness of these tetrapods have been investigated in detail by scanning electron microscopy, X-ray diffraction, and micro-Raman measurements. For a deeper understanding of the crystallinity, detailed high-resolution transmission electron microscopic studies on a typical ZnO tetrapod structure are presented. The involved growth mechanism for ZnO tetrapods with various arm morphologies is discussed with respect to variations in experimental conditions. These ZnO-T have been utilized for photocatalytic degradation and nanosensing applications. The photocatalytic activities of these ZnO-T with different arm morphologies forming networks have been investigated through the photocatalytic decolorization of a methylene blue (MB) solution under UV light illumination at ambient temperature. The results show that these ZnO-T exhibit strong photocatalytic activities against MB and its complete degradation can be achieved in very short time. In another application, a prototype of nanoelectronic sensing device has been built from these ZnO-T interconnected networks and accordingly utilized for UV detection and H2 gas sensing. The fabricated device structures showed excellent sensing behaviors for promising practical applications. The involved sensing mechanisms with respect to UV photons and H2 gas are discussed in detail. We consider that such multifunctional nanodevices based on ZnO tetrapod interconnected networks will be of interest for various advanced applications.