ABSTRACT
PURPOSE: Breast cancer continues to be the most commonly diagnosed cancer among Canadian women, with as many as 25-60% of women suffering from chronic neuropathic pain (CNP) as a pervasive consequence of treatment. While pharmacological interventions have shown limited efficacy for the management of CNP to date, psychological interventions, such as mindfulness-based stress reduction (MBSR), may be a promising alterative for improving pain-related problems. The purpose of this study was to use brain imaging methods to investigate this potential. METHODS: Resting-state fMRI was used in female breast cancer survivors with CNP before and after an 8-week MBSR course (n = 13) and compared with a waitlist control group (n = 10). RESULTS: Focusing on the default mode network, the most significant results show greater posterior cingulate connectivity with medial prefrontal regions post-MBSR intervention. Moreover, this change in connectivity correlated with reduced pain severity for the MBSR group. CONCLUSIONS: These results provide empirical evidence of a change in the brain following MBSR intervention associated with changes in the subjective experience of pain. IMPLICATIONS FOR CANCER SURVIVORS: This study gives hope for a non-invasive method of easing the struggle of CNP in women following breast cancer treatment.
Subject(s)
Breast Neoplasms , Cancer Survivors , Mindfulness , Neuralgia , Brain , Breast Neoplasms/complications , Breast Neoplasms/therapy , Canada , Female , Humans , Magnetic Resonance Imaging , Neuralgia/therapy , Stress, PsychologicalABSTRACT
SAHA (vorinostat) is a histone deacetylase inhibitor approved by the USA Food and Drug Administration (FDA) for treating advanced refractory cutaneous T cell lymphomas. As SAHA alters the expression of many genes under control of the Sp1 transcription factor, we examined the effect of its association with the FDA-approved anticancer antibiotic Mithramycin A (MTR, plicamycin), a competitive inhibitor of Sp1 binding to DNA. Sézary syndrome (SS) cells, expanded ex vivo from peripheral blood mononuclear cells of 4 patients, were tested for their sensitivity to the drugs regarding cytotoxicity and differential responsive gene expression. Multivariate statistical methods were used to identify genes whose expression is altered by SAHA, MTR, and the synergist effect of the two drugs. MTR, like SAHA, induced the apoptosis of SS cells, while the two drugs in combination showed clear synergy or potentiation. Expression data stressed a likely important role of additive or synergistic epigenetic modifications in the combined effect of the two drugs, while direct inhibition of Sp1-dependent transcription seemed to have only limited impact. Ontological analysis of modified gene expression suggested that the two drugs, either independently or synergistically, counteracted many intertwined pro-survival pathways deregulated in SS cells, resistance of these tumors to intrinsic and extrinsic apoptosis, abnormal adhesion migration, and invasive properties, as well as immunosuppressive behavior. Our findings provide preliminary clues on the individual and combined effects of SAHA and MTR in SS cells and highlight a potential therapeutic interest of this novel pair of drugs for treatment of SS patients.
Subject(s)
Hydroxamic Acids/therapeutic use , Plicamycin/therapeutic use , Sezary Syndrome/drug therapy , Skin Neoplasms/drug therapy , Antineoplastic Agents/administration & dosage , Antineoplastic Agents/therapeutic use , Cell Line, Tumor , Drug Therapy, Combination , Gene Expression Regulation, Neoplastic/drug effects , Humans , Hydroxamic Acids/administration & dosage , Plicamycin/administration & dosage , Transcriptome , VorinostatABSTRACT
We report an easy method to prepare thin, flexible and transparent electrodes that show enhanced inertness toward oxidation using modified silver nanowires (Ag NWs). Stabilization is achieved through the adsorption of triphenylphosphine (PPh3) onto the Ag NW hybrid dispersions prior to their 2D organization as transparent electrodes on polyethylene terephtalate (PET) films. After 110 days in air (20 °C) under atmospheric conditions, the transmittance of the PET/Ag NW/PPh3 based films is nearly unchanged, while the transmittance of the PET/Ag NW-based films decreases by about 5%. The sheet resistance increases for both materials as time elapses, but the rate of increase is more than four times slower for films stabilized by PPh3. The improved transmittance and conductivity results in a significantly enhanced stability for the figure of merit σ dc/σ op. This phenomenon is highlighted in highly oxidative nitric acid vapor. The tested stabilized films in such conditions exhibit a decrease to σ dc/σ op of only 38% after 75 min, whereas conventional materials exhibit a relative loss of 71%. In addition, by contrast to other classes of stabilizers, such as polymer or graphene-based encapsulants, PPh3 does not alter the transparency or conductivity of the modified films. While the present films are made by membrane filtration, the stabilization method could be implemented directly in other liquid processes, including industrially scalable ones.
ABSTRACT
OBJECTIVE: Malnutrition and psychological distress are often seen in patients with head-and-neck cancer, but little is known about the interrelationships between those two symptoms. The present study examined the relationship between malnutrition and psychological distress in patients with advanced head-and-neck cancer. METHODS: Using the Patient-Generated Subjective Global Assessment, 99 patients with advanced-stage head-and-neck cancer were screened for nutrition status. The patients were also screened for psychosocial distress (using the Distress Thermometer) and for psychosocial issues (using the Problem Checklist). Any relationship between malnutrition and psychosocial distress was determined by regression and correlation analysis. We also used t-tests to compare distress levels for patients with and without specific nutrition-related symptoms. RESULTS: The study group included 80 men and 19 women [mean age: 58.4 ± 10.9 years (range: 23-85 years)]. The correlation between poorer nutrition status and level of psychological distress was significant r = 0.37 (p < 0.001). Specifically, reduced food intake and symptoms were both positively associated with distress: r = 0.27 and r = 0.29 respectively, both significant at p < 0.01. After controlling for the effects of psychosocial problems and pain, nutrition status remained a significant predictor of distress, explaining 3.8% of the variance in the distress scores of the patients (p < 0.05). CONCLUSIONS: Malnutrition and symptoms were strongly related to distress in patients with advanced head-and-neck cancer. Our results suggest the need for further research into the complex relationship between nutrition status and distress and into the management of both nutrition and distress in cancer care.
ABSTRACT
Many synthetic or natural fibers are produced via the transformation of a liquid solution into a solid filament, which allows the wet processing of high molecular weight polymers, proteins, or inorganic particles. Synthetic wet-spun fibers are used in our everyday life from clothing to composite reinforcement applications. Spun fibers are also common in nature. Silk solidification results from the coagulation of protein solutions. The chemical phenomena involved in the formation of all these classes of fibers can be quite different but they all share the same fundamental transformation from a liquid to a solid state. The solidification process is critical because it governs the production rate and the strength that fibers can sustain to be drawn and wound. An approach is proposed in this work to investigate the kinetics of fiber solidification. This approach consists in circulating solidifying fibers in the extensional flow of a surrounding liquid. Such as polymers in extensional flows, the fibers break if resultant drag forces exceed the fiber tensile strength. The solidification kinetics of nanotube composite fibers serves as a validation example of this approach. The method could be extended to other systems and advance thereby the science and technology of fiber and textile materials. It is also a way to directly visualize the scission of chain-like systems in extensional flows.
ABSTRACT
As-produced carbon nanotubes often contain a fraction of impurities such as metal catalysts, inorganic supports, and carbon by-products. These impurities can be partially removed by using acidic dissolution. The resulting nanotube materials have to be dried to form a powder. The processability of nanotubes subjected to regular (thermal vaporisation) drying is particularly difficult because capillary forces pack and stick the nanotubes irreversibly, which limits their dispersability in polymeric matrices or solvents. We show that this dramatic limitation can be circumvented by using freeze-drying instead of regular-drying during nanotube purification process. In this case, the nanotubes are trapped in frozen water which is then sublimated. As a result the final powder is significantly less compact and, more important, the nanotubes can be easily dispersed with no apparent aggregates, thereby greatly enhancing their processability, e.g., they can be used to make homogeneous composites and fibers. Results from coagulation spinning from water-based dispersions of regularly-dried and freeze-dried nanotubes are compared. We also show that freeze-dried materials, in contrast to regularly-dried materials, can be dissolved in organic polar solvents using alkali-doped nanotubes. High resolution TEM and XRD analysis demonstrate that the nanotube structure and quality are not affected at the nanoscale by freeze-drying treatments.
Subject(s)
Nanotechnology/methods , Nanotubes, Carbon/chemistry , Chemistry, Pharmaceutical/methods , Freeze Drying , Freezing , Microscopy, Electron, Transmission , Nanotubes/chemistry , Particle Size , Solvents/chemistry , Temperature , Water/chemistry , X-Ray DiffractionABSTRACT
We report a new hot-drawing process for treating wet-spun composite fibers made of single- and multiwall carbon nanotubes and poly(vinyl alcohol). As shown in previous reports, untreated composite nanotube fibers exhibit a very large strain-to-failure, and their toughness, which is the energy needed to break the fibers, exceeds that of any other known materials. However, untreated composite nanotube fibers absorb a very small amount of energy at low strain and become degraded in humid conditions. In this work, we use hot-drawing treatments, a concept inspired from textile technologies, to improve the properties of nanotube/PVA fibers. This treatment yields a crystallinity increase of the PVA and an unprecedented degree of alignment of the nanotubes. These structural modifications lead to a markedly improved energy absorption at low strain and make the fibers resistant to moisture. Hot-drawn nanotube/PVA fibers hold great potential for a number of applications such as bulletproof vests, protective textiles, helmets, and so forth.
ABSTRACT
Percolation is a statistical concept that describes the formation of an infinite cluster of connected particles or pathways. Lowering the percolation threshold is a critical issue to achieve light and low-cost conductive composites made of an insulating matrix loaded with conductive particles. This has interest for applications where charge dissipation and electrical conductivity are sought in films, coatings, paints, or composite materials. One route to decreasing the loading required for percolation is to use rod-like particles. Theoretical predictions indicate that this may also be achieved by altering the interaction potential between the particles. Although percolation may not always respond monotonically to interactions, the use of adhesive rods can be expected to be an ideal combination. By using a system made of carbon nanotubes in an aqueous surfactant solution, we find that very small attraction can markedly lower the percolation threshold. The strength of this effect can thereby have direct technological interest and explain the large variability of experimental results in the literature dealing with the electrical behavior of composites loaded with conducting rods.
ABSTRACT
This experimental paper deals with phase separations of binary mixtures composed of a continuous liquid crystal phase and an isotropic dispersed phase. In contrast to isotropic binary mixtures, the investigated mixtures do not lead to a full phase separation but to a self-ordering of colloidal particles, as reported earlier (Loudet, J. C. et al. Nature 2000, 407, 611). We present here further aspects of such phase separations which include the kinetics of the phase separation, the origin of the formation of dislocation-like patterns, the influence of surfactants, chiral additives, and temperature on the formed colloidal structures. The present results show that (i) the dislocations in chain arrays can be seen as kinetically frozen defects, (ii) temperature can be used to control the size of the domains formed upon demixing, (iii) a slight change in surface chemistry, via the addition of surfactants, profoundly alters the formed colloidal structures, and (iv) chiral additives allow the formation of unique helical pearl chains which reflect the symmetry of the liquid crystal phase they are embedded in.
ABSTRACT
The Stokes-Einstein relation relates the diffusion coefficient of a spherical Brownian particle in a viscous fluid to its friction coefficient. For a particle suspended in anisotropic liquid, theory predicts that the drag coefficient should also be anisotropic. Using video microscopy coupled with particle tracking routines, the Brownian fluctuations of micrometer-sized particles were analyzed to yield a quantitative measurement of the diffusion coefficients parallel and perpendicular to the nematic director. The experimental values agree quite well with recent numerical calculations that take into account the distortions of the director field in the vicinity of the particles.
ABSTRACT
In vivo structural (CT, MRI) and functional (SPECT, PET) brain imaging techniques have been widely used to study the neuroanatomy and neurophysiology of Alzheimer's disease (AD) and to identify definite biological markers of the disease. We used meta-analytic methods to synthesize this literature to determine what neuroanatomical structures best differentiate patients with AD from healthy normal controls. A total of 125 studies published between 1984 and 2000 that included 3543 patients with AD and 1698 normal healthy controls met inclusion criteria. We found that measures of the temporal cortices, including the amygdala, hippocampus, and inferior temporal lobes, along with the anterior cingulate cortex, associated with the largest magnitudes of effects and, hence, could serve as the most useful structures to help clinicians differentiate AD from healthy normal aging.
Subject(s)
Alzheimer Disease/pathology , Amygdala/pathology , Brain Mapping , Gyrus Cinguli/pathology , Hippocampus/pathology , Temporal Lobe/pathology , Aged , Brain/pathology , Controlled Clinical Trials as Topic , Female , Humans , Magnetic Resonance Imaging , Male , Tomography, Emission-Computed , Tomography, X-Ray ComputedABSTRACT
We study the behavior of colloidal particles suspended in a thermotropic nematic solvent in the presence of an electric field. For normal boundary conditions of the nematic director at the particles' surface, we show experimentally that an electric field applied along the dipolar axis of an elastic dipole induces a transition to an elastic quadrupolar configuration. Turning the field off makes the system go back to the initial state. We also show that it is possible to directly evidence an elastic quadrupolar repulsion between droplets.
ABSTRACT
We report an experimental study of colloidal inclusions in free-standing films of smectic-C* liquid crystal. The inclusions are cholesteric droplets that form above the bulk smectic-C*-7cholesteric transition temperature. Each droplet confined in a two-dimensional (2D) system, is accompanied by a topological defect. The distortions of the in-plane orientational order of the smectic-C* film induce elastic interactions between the droplets. As in 3D water nematic emulsions, a short-range repulsion and a long-range dipolar attraction govern the stability of the inclusions and lead to their organization in chainlike structures. Our results are in agreement with recent theoretical predictions.
ABSTRACT
Mechanistically based predictions of skin permeability coefficients (Kp) derived solely on the basis of molecular structure information of organic compounds have not been reported previously. The objective of the present study was to predict the human abdominal Kp of structurally unrelated organic compounds using a mechanistic equation that takes into account compound-specific and species-specific determinants of Kp and relates the compound-specific determinants directly to molecular structure information. The method consisted of obtaining predictions based on a modified form of the conventional equation used to describe Kp (= P x D/L, where P, D, and L represent the stratum corneum:water partition coefficient, diffusion coefficient, and path length of diffusion). The value of P was predicted from the n-octanol:water partition coefficient (Po:w) computed from molecular structure information as well as the lipid, protein, and water contents in stratum corneum. The value of D was predicted according to the conventional Einstein-Stoke equation using the molar volume (Vmolar) of compounds computed from molecular structure information as well as data on viscosity of the stratum corneum components. Finally, the value of L was estimated in accordance with the characteristics of the diffusion pathways in the stratum corneum (i.e., transcellular and intercellular pathways). The average ratio of predicted Kp to the corresponding mean experimental values obtained from the literature was 1.25 (SD = 0.68, r = .95) for 47 structurally unrelated organic compounds (volatile organics and drugs), which were characterized by the presence of less than 2 hydrogen bonding groups and Vmolar < 231 cm3/mol. The present study is the first initiative that permits prediction of the human Kp of organic compounds by using molecular structure information as the sole chemical-specific input in a mechanistic equation.
Subject(s)
Models, Biological , Organic Chemicals/chemistry , Organic Chemicals/pharmacokinetics , Skin Absorption/physiology , Abdomen , Alcohols/chemistry , Alcohols/pharmacokinetics , Carboxylic Acids/chemistry , Carboxylic Acids/pharmacokinetics , Humans , Hydrocarbons/chemistry , Hydrocarbons/pharmacokinetics , Hydrogen Bonding , Predictive Value of Tests , Reproducibility of Results , Skin/metabolism , Solubility , Species Specificity , Structure-Activity RelationshipABSTRACT
Tissue:plasma (P(t:p)) partition coefficients (PCs) are important parameters describing tissue distribution of drugs. The ultimate goal in early drug discovery is to develop and validate in silico methods for predicting a priori the P(t:p) for each new drug candidate. In this context, tissue composition-based equations have recently been developed and validated for predicting a priori the non-adipose and adipose P(t:p) for neutral organic solvents and pollutants. For ionizable drugs that bind to different degrees to common plasma proteins, only their non-adipose P(t:p) values have been predicted with these equations. The only compound-dependent input parameters for these equations are the lipophilicity parameter, such as olive oil-water PC (K(vo:w)) or n-octanol-water PC (P(o:w)), and/or unbound fraction in plasma (fu(p)) determined under in vitro conditions. Tissue composition-based equations could potentially also be used to predict adipose tissue-plasma PCs (P(at:p)) for ionized drugs. The main objective of the present study was to modify these equations for predicting in vivo P(at:p) (white fat) for 14 structurally unrelated ionized drugs that bind substantially to plasma macromolecules in rats, rabbits, or humans. The second objective was to verify whether K(vo:w) or P(o:w) provides more accurate predictions of in vivo P(at:p) (i.e., to verify whether olive oil or n-octanol is the better surrogate for lipids in adipose tissue). The second objective was supported by comparing in vitro data on P(at:p) with those on olive oil-plasma PC (K(vo:p)) for five drugs. Furthermore, in vivo P(at:p) was not only predicted from K(vo:w) and P(o:w) of the non-ionized species, but also from K*(vo:w) and P*(o:w), taking into account the ionized species in addition. The P(at:p) predicted from K*(vo:w), P*(o:w), and P(o:w) differ from the in vivo P(at:p) by an average factor of 1.17 (SD = 0.44, r = 0.95), 15.0 (SD = 15.7, r = 0.59), and 40.7 (SD = 57.2, r = 0.33), respectively. The in vitro values of K(vo:p) differ from those of P(at:p) by an average factor of 0.86 (SD = 0.16, r = 0.99, n = 5). The results demonstrate that (i) the equation using only data on fu(p) as input and olive oil as lipophilicity surrogate is able to provide accurate predictions of in vivo P(at:p), and (ii) olive oil is a better surrogate of the adipose tissue lipids than n-octanol. The present study is an innovative method for predicting in vivo fat partitioning of drugs in mammals.
Subject(s)
Adipose Tissue/metabolism , Pharmaceutical Preparations/blood , Animals , Humans , Pharmaceutical Preparations/metabolism , Pharmacokinetics , Rabbits , RatsABSTRACT
Nanotube fibers with diameters ranging between 10 and 100 microns were produced by a simple spinning process. These fibers were studied by x-ray scattering--a technique that allows good visualization of the composition as well as the alignment of the constituents. The fibers were found to be composed of bundles of single wall carbon nanotubes, poly(vinyl alcohol) polymer chains, graphitic objects, and Ni-based particles. The nanotubes and poly(vinyl alcohol) chains were preferentially oriented along the fiber axis.
Subject(s)
Crystallization/methods , Crystallography, X-Ray/methods , Nanotechnology/methods , Nanotubes, Carbon/chemistry , Catalysis , Crystallography/methods , Graphite/chemistry , Molecular Conformation , Nanotechnology/instrumentation , Nanotubes, Carbon/isolation & purification , Nickel/chemistry , Polyvinyl Alcohol/chemistry , Scattering, Radiation , TextilesSubject(s)
Air/analysis , Plant Oils/chemistry , Algorithms , Animals , Humans , Olive Oil , Rats , Solubility , VolatilizationABSTRACT
A simple method was used to assemble single-walled carbon nanotubes into indefinitely long ribbons and fibers. The processing consists of dispersing the nanotubes in surfactant solutions, recondensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. Flow-induced alignment may lead to a preferential orientation of the nanotubes in the mesh that has the form of a ribbon. Unlike classical carbon fibers, the nanotube fibers can be strongly bent without breaking. Their obtained elastic modulus is 10 times higher than the modulus of high-quality bucky paper.
ABSTRACT
We present experimental evidence for viscous sintering phenomena in a gel formed by highly viscous emulsion droplets. When a rupturing agent is added to the initially stable emulsion, a gel forms, which further contracts by preserving the geometry of the container. The initial stages of densification (up to 60%) follow very well the "cylindrical model" for viscous sintering, but deviate at the final stages of densification. The observed inverse dependence of the contraction rate on viscosity is consistent with the viscous sintering theory.
ABSTRACT
Some binary mixtures exist as a single phase at high temperatures and as two phases at lower temperatures; rapid cooling therefore induces phase separation that proceeds through the initial formation of small particles and subsequent growth and coarsening. In solid and liquid media, this process leads to growing particles with a range of sizes, which eventually separate to form a macroscopically distinct phase. Such behaviour is of particular interest in systems composed of an isotropic fluid and a liquid crystal, where the random distribution of liquid-crystal droplets in an isotropic polymer matrix may give rise to interesting electro-optical properties. Here we report that a binary mixture consisting of an isotropic fluid and a liquid crystal forming the continuous phase does not fully separate into two phases, but self-organizes into highly ordered arrays of monodisperse colloidal droplet chains. We find that the size and spatial organization of the droplets are controlled by the orientational elasticity of the liquid-crystal phase and the defects caused by droplets exceeding a critical size. We expect that our approach to forming monodisperse, spatially ordered droplets in liquid crystals will allow the controlled design of ordered composites that may have useful rheological and optical properties.