Note: Laser-cut molybdenum grids for a retarding field energy analyzer.

A retarding field energy analyzer (RFEA) with grids created by laser-cutting a honeycomb mesh in a 50 µm thick molybdenum foil is presented. The flat grids span an area of 1 cm2 and have high transmission (20 µm wide walls between 150 µm wide meshes). The molybdenum grids were tested in a 3-grid RFEA configuration with an analyzer depth of 0.87 mm.

Photocatalytic degradation of molinate in aqueous solutions.

In this study, the degradation of molinate through heterogeneous photocatalysis, using two different types of the semiconductor TiO2 as photocatalyst, as well as through homogeneous treatment, applying the photo-Fenton reaction, has been investigated. As far as heterogeneous photocatalysis is concerned, the degradation of the pesticide follows apparent first-order kinetics, while the type of the catalyst and the pH value of the solution affect the degradation rate. The effect of the addition of electron scavengers (H2O2 and K2S2O8) was also studied. In the case of photo-Fenton-assisted system, the degradation also follows pseudo-first-order kinetics. Parameters such as iron's and electron scavenger's concentration and inorganic ions strongly affect the degradation rate. The extent of pesticide mineralization was investigated using dissolved organic carbon (DOC) measurements. The toxicity of the treated solution was evaluated using the Microtox test based on the luminescent bacteria Vibrio fischeri. The detoxification and mineralization efficiency was found to be dependent on the system studied, and although it did not follow the rate of pesticide disappearance, it took place in considerable extent. The study of the photodegradation treatment was completed by the determination of the intermediate by-products formed during the process, which was carried out using LC-MS/MS technique and led to similar compounds with both processes.

Bi-component semiconductor oxide photoanodes for the photoelectrocatalytic oxidation of organic solutes and vapours: a short review with emphasis to TiO2-WO3 photoanodes.

The use of binary semiconductor oxide anodes for the photoelectrocatalytic oxidation of organic species (both in solution and gas phase) is reviewed. In the first part of the review, the principle of electrically assisted photocatalysis is presented, the preparation methods for the most common semiconductor oxide catalysts are briefly mentioned, while the advantages of appropriately chosen semiconductor combinations for efficient UV and visible (vis) light utilization are highlighted. The second part of the review focuses on the discussion of TiO(2)-WO(3) photoanodes (among the most studied bi-component semiconductor oxide systems) and in particular on coatings prepared by electrodeposition/electrosynthesis or powder mixtures (the focus of the authors' research during recent years). Studies concerning the microscopic, spectroscopic and photoelectrochemical characterization of the catalysts are presented and examples of photoanode activity towards typical dissolved organic contaminants as well as organic vapours are given. Particular emphasis is paid to: (a) The dependence of photoactivity on catalyst morphology and composition and (b) the possibility of carrying out photoelectrochemistry in all-solid cells, thus opening up the opportunity for photoelectrocatalytic air treatment.

Photocatalytic degradation of prions using the photo-Fenton reagent.

Prions are proteinaceous infectious agents postulated to be the causative agents of a group of fatal neurodegenerative diseases known as transmissible spongiform encephalopathies (TSEs). A known iatrogenic transmission route of TSEs to humans occurs via prion-contaminated surgical instruments or biological materials. Prions, unlike most common pathogens, exhibit an extraordinary resistance to conventional decontamination procedures. We have recently demonstrated that the application of TiO(2)-based heterogeneous photocatalytic oxidation is able to significantly reduce prion infectivity. The present study investigates the potential of a homogeneous photocatalytic method, based on the photo-Fenton reagent, to degrade prion proteins. We show that the photo-Fenton reagent efficiently degrades not only recombinant prion proteins, but also the total protein amount from brain preparations of naturally or experimentally infected species and PrP(Sc) (PrP scrapie) contained in sheep scrapie brain homogenates.

Photocatalytic degradation and drug activity reduction of Chloramphenicol.

The photocatalytic degradation of Chloramphenicol, an antibiotic drug, has been investigated in aqueous heterogeneous solutions containing n-type oxide semiconductors as photocatalysts. The disappearance of the organic molecule follows approximately a pseudo-first-order kinetics according to the Langmuir-Hinshelwood model. It was observed that, with TiO(2) P-25 as photocatalyst, quantitative degradation of the organic molecule occurs after 4h of illumination. During this time, the dechlorination of the substrate is complete, while the organic nitrogen was recovered in the form of nitrate and ammonium ions. The effect of temperature on the degradation rate of Chloramphenicol shows similar apparent activation energies for both TiO(2) P-25 and ZnO photocatalysts. The initial apparent photonic efficiency (zeta(0)) of the photo-oxidation and the mineralization under various experimental conditions have been calculated, while the Kirby-Bauer disc diffusion method showed a 100% reduction of the drug activity after 90 min of photocatalytic treatment.

Oxidation of two organophosphorous insecticides by the photo-assisted Fenton reaction.

The photocatalytic degradation of two selected insecticides (dimethoate and methyl parathion) has been studied using the photo-assisted Fenton reaction. The degradation kinetics were studied under different conditions such as iron's and oxidant's concentration, temperature and inorganic ions. The degradation rates proved to be strongly influenced by these parameters. The replacement of hydrogen peroxide with peroxydisulfate was also tested in a photo-Fenton-like reaction. This system achieved high degradation rates of the selected compounds. Intermediate products formed during photocatalytic treatment were identified by means of solid-phase extraction (SPE) coupled to gas chromatography-mass spectroscopy techniques (GC-MS). Eight possible by-products were identified for parathion methyl and three for dimethoate formed through mainly oxidation and dealkylation reactions. Mineralization studies showed also that the photo-Fenton and the photo-Fenton-like systems are able to achieve mineralization of the insecticides. However, complete detoxification is achieved only in the presence of the photo-Fenton reagent.

Photocatalytic decolorization and degradation of dye solutions and wastewaters in the presence of titanium dioxide.

In this study, the photocatalytic degradation of two commercial azo dyes in the presence of TiO(2) suspensions as photocatalyst has been investigated. The degradation of the dyes follows a pseudo-first-order kinetics according to the Langmuir-Hinshelwood model. Under the certain experimental conditions, in the presence of TiO(2) P-25 decolorization is achieved within 100 min of illumination, while in the presence of TiO(2) Hombikat UV-100 complete color disappearance is accomplished in less than 50 min of light exposure. The influence of various parameters, such as the type and mass of the catalyst, the initial concentration of the dye, etc. on the degradation process was examined. The mineralization of organic carbon was also evaluated by measuring the dissolved organic carbon (DOC) of the dye solutions. Moreover, the toxic properties of the dye solutions treated by photocatalysis were examined by the use of a Microtox bioassay (Vibrio fischeri). Finally, experiments using real textile wastewater were also carried out, in order to examine the effectiveness of the method to a more complex substrate.

Photocatalytic oxidation of sulfamethazine.

The photocatalytic degradation of sulfamethazine (SMT), a sulfonamide drug, has been investigated in aqueous heterogeneous solutions containing n-type oxide semiconductors as photocatalysts. The disappearance of the organic molecule follows approximately a pseudo-first-order kinetics according to the Langmuir-Hinshelwood model. It was observed that, with TiO2 P-25 and ZnO as photocatalysts, quantitative degradation of the organic molecule occurs after 4 h. During this time the desulfurization of the substrate is complete, while only 30% of the nitrogen in the organic compound was recovered in the form of nitrate and ammonium ions, indicating that various other nitrogen-containing organic compounds remain in the solution. The addition of H2O2 leads, in the case of TiO2 P-25, to a twofold increase on the reaction rate, while a negative effect has been observed in the presence of ZnO. The initial apparent photonic efficiency (zeta0) of the photooxidation and the mineralization under various experimental conditions have been calculated.

Solar photocatalytic treatment of synthetic municipal wastewater.

The photocatalytic organic content reduction of a selected synthetic municipal wastewater by the use of heterogeneous and homogeneous photocatalytic methods under solar irradiation has been studied at a pilot-plant scale at the Plataforma Solar de Almeria. In the case of heterogeneous photocatalysis the effect of catalysts and oxidants concentration on the decomposition degree of the wastewater was examined. By an accumulation energy of 50 kJL(-1) the synergetic effect of 0.2 gL(-1)TiO(2) P-25 with hydrogen peroxide (H(2)O(2)) and Na(2)S(2)O(8) leads to a 55% and 73% reduction of the initial organic carbon content, respectively. The photo-fenton process appears to be more efficient for this type of wastewater in comparison to the TiO(2)/oxidant system. An accumulation energy of 20 kJL(-1) leads to 80% reduction of the organic content. The presence of oxalate in the Fe(3+)/H(2)O(2) system leads to an additional improvement of the photocatalytic efficiency.

Photocatalytic degradation of p-coumaric acid over TiO2 suspensions.

The photocatalytic degradation of p-coumaric acid, a biorecalcitrant phenolic compound typically found in olive processing and wine distillery waste waters, has been investigated in aqueous heterogeneous solutions containing semiconductor powders as photocatalysts. The disappearance of the organic molecule follows approximately a pseudo-first kinetic order according to the Langmuir-Hinselwood model. The most important reaction intermediates were determined by GS-MS and HPLC measurements, suggesting a reaction pathway for the photodegradation. Various commercial photocatalysts were compared with respect to their overall efficiency, as well as the production of CO2. The effect of H2O2 on the reaction rate was ascertained.