ABSTRACT
INTRODUCTION: Stability in orthognathic surgery is nowadays considered as efficient and adequate. The objective of this study was to determine and to compare the mechanical resistance to vertical load of a Le Fort I advancement osteotomy stabilized by mean of two different osteosynthesis techniques, one using two 10-hole pre-bent T-shaped plates, the other using four manually bent 4-hole L- and J-shaped plates. MATERIEL AND METHODS: Standardized Le Fort I advancement osteotomies have been made on polyurethane models. The maxillary advancement was 5mm. Two groups of five models each were created. Group 1 was stabilized by mean of two 10-hole pre-bent T-shaped plates fixed by monocortical screws in the paranasal region. Group 2 was stabilized by mean of manually bent four 4-hole L-shaped plates fixed monocortical screws in the zygomatic and paranasal regions. A testing machine was used to load vertically the models at the range of 1mm/min linear displacement until peak load and system failure. Statistical analysis was realized using ANOVA and t-test, considering P as significant if <0.005. RESULTS: The maximal tolerated load was 15N in group 1and 42.71N in group 2 (P=0.003). DISCUSSION: The use of two T-shaped 10-holes pre-bent plates allows for less resistance in vertical loading than the use of four 4-holes manually bent L-shaped plates.
Subject(s)
Bone Plates , Fracture Fixation, Internal , Osteotomy, Le Fort , Stress, Mechanical , Bone Plates/adverse effects , Bone Screws/adverse effects , Equipment Design , Equipment Failure , Equipment Failure Analysis , Fracture Fixation, Internal/instrumentation , Fracture Fixation, Internal/methods , Humans , In Vitro Techniques , Materials Testing/methods , Mechanical Phenomena , Models, Anatomic , Osteotomy, Le Fort/instrumentation , Osteotomy, Le Fort/methodsABSTRACT
El objetivo de esta investigación fue comparar la respuesta tisular en defectos tratados con matriz óseo de origen bovino y humano. Se realizó un estudio descriptivo con 12 conejos en los cuales se confeccionaron dos defectos en la calota craneana de acuerdo a procesos convencionales. Cada defecto fue aleatoriamente rellenado con matriz ósea bovina o con matriz ósea humana; se realizaron evaluaciones histológicas a las 7 y 15 semanas de realizada la cirugía (6 animales en cada grupo). A las 7 semanas se identificó un leve infiltrado inflamatorio y claras diferencias entre el hueso periférico y el sitio injertado, mientras que a las 15 semanas se observo la persistencia de algunas partículas injertadas y la presencia de hueso nuevo formado en el defecto; no se logró identificar diferencias en la secuencia de reparación o retrasos en la misma con ninguno de los dos materiales. Se concluye que ambos materiales son útiles en la regeneración ósea en el presente modelo experimental.
The aim of this research was to compare the tissue response in treated defects with bone matrix with bovine or human origin. Was realized a descriptive study with 12 rabbits where was executed two defects in the skull in relation to conventional techniques. Randomized defects were used to put bone matrix with bovine or human origin; histological exam was realized in the week number 7 and 15 with 6 animals each. At 7 weeks was observed a limited inflammatory infiltrate with clear differences between the peripheral bone and the filled bone and in the 15 weeks of analysis was observed the presence of some particulate of the bone graft beside a new bone into the defect; was not observed any differences in the sequence of repair or delayed in the bovine or human material. It´s concluded that both materials are useful in bone regeneration for this experimental model.
Subject(s)
Humans , Animals , Male , Cattle , Rabbits , Biocompatible Materials , Bone Regeneration/physiology , Bone Substitutes/therapeutic use , Bone Transplantation/methods , Bone MatrixABSTRACT
Electrical stimulation has been used in different conditions for tissue regeneration. The aim of this study was to analyze the tissue response of defects created in rabbit skulls to electrical stimulation. Two groups were formed, each with 9 New Zealand rabbits; two 5 mm defects were made, one in each parietal, with one being randomly filled with autogenous bone extracted as particles and the other maintained only with blood clotting. The rabbits were euthanized at 8 weeks and 15 weeks to then study the samples collected histologically. In the 8-week analysis bone formation was observed in the defects in the test and control filled with bone graft, whereas the defects with clotting presented a very early stage of bone formation with abundant connective tissue. At 15 weeks an advanced stage of bone regeneration was identified in the defects with bone graft, whereas no significant differences were found in the electrically stimulated defects. In conclusion, electrical stimulus does not alter the sequence of bone formation; new studies could help establish patterns and influences of the stimulus on bone regeneration.
La estimulación eléctrica ha sido empleada en diferentes condiciones para la regeneración de tejidos. El objetivo de esta investigación es analizar la respuesta tisular de defectos creados en cráneo de conejos a la estimulación eléctrica. Se formaron 2 grupos con 9 conejos de raza New Zealand cada uno; en ellos se realizaron dos defectos de 5 mm, uno en cada parietal, siendo aleatoriamente uno rellenado con el propio hueso autógeno extraído en forma de partículas y el otro mantenido solo con coagulo sanguíneo; se realizó la eutanasia a las 8 semanas y a las 15 semanas para luego estudiar histológicamente las muestras recolectadas. En el análisis de 8 semanas se observó formación ósea en los defectos test y control rellenados con injerto óseo mientras que los defectos con coagulo presentaron un estado muy precoz de formación ósea, observándose abundante tejido conectivo. A las 15 semanas se identificó un estado avanzado de regeneración ósea en los defectos con injerto óseo, donde no se apreció diferencias importantes en los defectos estimulados eléctricamente. Se concluye que el estimulo eléctrico no altera la secuencia de formación ósea; nuevos estudios podrían contribuir a establecer patrones e influencias del estimulo eléctrico en la regeneración ósea.
Subject(s)
Animals , Rabbits , Bone Regeneration/physiology , Electric Stimulation Therapy/methods , Skull/pathology , Skull/surgery , Bone Transplantation , Time FactorsABSTRACT
Electrical stimulation has been used in different conditions for tissue regeneration. The aim of this study was to analyze the tissue response of defects created in rabbit skulls to electrical stimulation. Two groups were formed, each with 9 New Zealand rabbits; two 5 mm defects were made, one in each parietal, with one being randomly filled with autogenous bone extracted as particles and the other maintained only with blood clotting. The rabbits were euthanized at 8 weeks and 15 weeks to then study the samples collected histologically. In the 8-week analysis bone formation was observed in the defects in the test and control filled with bone graft, whereas the defects with clotting presented a very early stage of bone formation with abundant connective tissue. At 15 weeks an advanced stage of bone regeneration was identified in the defects with bone graft, whereas no significant differences were found in the electrically stimulated defects. In conclusion, electrical stimulus does not alter the sequence of bone formation; new studies could help establish patterns and influences of the stimulus on bone regeneration.
ABSTRACT
ABSTRACT During a survey conducted in several different regions of Brazil, two unique tospoviruses were isolated and characterized, one from chrysanthemum and the other from zucchini. The chrysanthemum virus displayed a broad host range, whereas the virus from zucchini was restricted mainly to the family Cucurbitaceae. Double-antibody sandwich-enzyme-linked immunosorbent assay and western immunoblot analyses demonstrated that both viruses were serologically distinct from all reported tospovirus species including the recently proposed peanut yellow spot virus and iris yellow spot virus (IYSV) species. The nucleotide sequences of the nucleocapsid (N) genes of both viruses contain 780 nucleotides encoding for deduced proteins of 260 amino acids. The N proteins of these two viruses displayed amino acid sequence similarities with the previously described tospovirus species ranging from 20 to 75%, but they were more closely related to each other (80%). Based on the biological and molecular features, these viruses are proposed as two new tospovirus species, designated chrysanthemum stem necrosis virus (CSNV) and zucchini lethal chlorosis virus (ZLCV). With the identification of CSNV and ZLCV, in addition to tomato spotted wilt virus, groundnut ring spot virus, tomato chlorotic spot virus, and IYSV, Brazil harbors the broadest spectrum of tospovirus species reported.
ABSTRACT
A tospovirus from onion causing a disease known as "sapeca" by growers in Brazil was characterized. Symptoms on onion consisted of numerous eyelike spots on the leaves and flower stalks resulting in flower abortion. Nicotiana benthamiana and N. rustica were the only systemic hosts experimentally found. Double antibody sandwich enzyme-linked immunosorbent assay (DAS-ELISA) experiments demonstrated that this virus was serologically related to iris yellow spot virus (IYSV), a tospovirus recently described in the Netherlands. This virus, from onion, based on an amino acid sequence identity of 90.5% for the N gene protein, is regarded as a strain of IYSV and is designated IYSVBR This 10% divergence in the nucleocapsid protein may represent an adaptation of the virus to distinct ecological niches.