Spatio-temporal analysis of strawberry architecture: insights into the control of branching and inflorescence complexity.

Plant architecture plays a major role in flowering and therefore in crop yield. Attempts to visualize and analyse strawberry plant architecture have been few to date. Here, we developed open-source software combining two- and three-dimensional representations of plant development over time along with statistical methods to explore the variability in spatio-temporal development of plant architecture in cultivated strawberry. We applied this software to six seasonal strawberry varieties whose plants were exhaustively described monthly at the node scale. Results showed that the architectural pattern of the strawberry plant is characterized by a decrease of the module complexity between the zeroth-order module (primary crown) and higher-order modules (lateral branch crowns and extension crowns). Furthermore, for each variety, we could identify traits with a central role in determining yield, such as date of appearance and number of branches. By modeling the spatial organization of axillary meristem fate on the zeroth-order module using a hidden hybrid Markov/semi-Markov mathematical model, we further identified three zones with different probabilities of production of branch crowns, dormant buds, or stolons. This open-source software will be of value to the scientific community and breeders in studying the influence of environmental and genetic cues on strawberry architecture and yield.

Modeling the Impact of Proportion, Sowing Date, and Architectural Traits of a Companion Crop on Foliar Fungal Pathogens of Wheat in Crop Mixtures.

Diversification of cropping systems is a lever for the management of epidemics. However, most research to date has focused on cultivar mixtures, especially for cereals, even though crop mixtures can also improve disease management. To investigate the benefits of crop mixtures, we studied the effect of different crop mixture characteristics (i.e., companion proportion, sowing date, and traits) on the protective effect of the mixture. We developed a SEIR (Susceptible, Exposed, Infectious, Removed) model of two damaging wheat diseases (Zymoseptoria tritici and Puccinia triticina), which were applied to different canopy components, ascribable to wheat and a theoretical companion crop. We used the model to study the sensitivity of disease intensity to the following parameters: wheat-versus-companion proportion, companion sowing date and growth, and architectural traits. For both pathogens, the companion proportion had the strongest effect, with 25% of companion reducing disease severity by 50%. However, changing companion growth and architectural traits also significantly improved the protective effect. The effect of companion characteristics was consistent across different weather conditions. After decomposing the dilution and barrier effects, the model suggested that the barrier effect is maximized for an intermediate proportion of companion crop. Our study thus supports crop mixtures as a promising strategy to improve disease management. Future studies should identify real species and determine the combination of host and companion traits to maximize the protective effect of the mixture. [Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

A root functional-structural model allows assessment of the effects of water deficit on water and solute transport parameters.

Root water uptake is driven by a combination of hydrostatic and osmotic forces. Water transport was characterized in primary roots of maize seedlings grown hydroponically under standard and water deficit (WD) conditions, as induced by addition of 150 g l-1 polyethylene glycol 8000 (water potential= -0.336 MPa). Flow measurements were performed using the pressure chamber technique in intact roots or on progressively cut root system architectures. To account for the concomitant transport of water and solutes in roots under WD, we developed within realistic root system architectures a hydraulic tree model integrating both solute pumping and leak. This model explains the high spontaneous sap exudation of roots grown in standard conditions, the non-linearity of pressure-flow relationships, and negative fluxes observed under WD conditions at low external hydrostatic pressure. The model also reveals the heterogeneity of driving forces and elementary radial flows throughout the root system architecture, and how this heterogeneity depends on both plant treatment and water transport mode. The full set of flow measurement data obtained from individual roots grown under standard or WD conditions was used in an inverse modeling approach to determine their respective radial and axial hydraulic conductivities. This approach allows resolution of the dramatic effects of WD on these two components.

PhenoTrack3D: an automatic high-throughput phenotyping pipeline to track maize organs over time.

BACKGROUND: High-throughput phenotyping platforms allow the study of the form and function of a large number of genotypes subjected to different growing conditions (GxE). A number of image acquisition and processing pipelines have been developed to automate this process, for micro-plots in the field and for individual plants in controlled conditions. Capturing shoot development requires extracting from images both the evolution of the 3D plant architecture as a whole, and a temporal tracking of the growth of its organs. RESULTS: We propose PhenoTrack3D, a new pipeline to extract a 3D + t reconstruction of maize. It allows the study of plant architecture and individual organ development over time during the entire growth cycle. The method tracks the development of each organ from a time-series of plants whose organs have already been segmented in 3D using existing methods, such as Phenomenal [Artzet et al. in BioRxiv 1:805739, 2019] which was chosen in this study. First, a novel stem detection method based on deep-learning is used to locate precisely the point of separation between ligulated and growing leaves. Second, a new and original multiple sequence alignment algorithm has been developed to perform the temporal tracking of ligulated leaves, which have a consistent geometry over time and an unambiguous topological position. Finally, growing leaves are back-tracked with a distance-based approach. This pipeline is validated on a challenging dataset of 60 maize hybrids imaged daily from emergence to maturity in the PhenoArch platform (ca. 250,000 images). Stem tip was precisely detected over time (RMSE < 2.1 cm). 97.7% and 85.3% of ligulated and growing leaves respectively were assigned to the correct rank after tracking, on 30 plants × 43 dates. The pipeline allowed to extract various development and architecture traits at organ level, with good correlation to manual observations overall, on random subsets of 10-355 plants. CONCLUSIONS: We developed a novel phenotyping method based on sequence alignment and deep-learning. It allows to characterise the development of maize architecture at organ level, automatically and at a high-throughput. It has been validated on hundreds of plants during the entire development cycle, showing its applicability on GxE analyses of large maize datasets.

High-throughput and automatic structural and developmental root phenotyping on Arabidopsis seedlings.

BACKGROUND: High-throughput phenotyping is crucial for the genetic and molecular understanding of adaptive root system development. In recent years, imaging automata have been developed to acquire the root system architecture of many genotypes grown in Petri dishes to explore the Genetic x Environment (GxE) interaction. There is now an increasing interest in understanding the dynamics of the adaptive responses, such as the organ apparition or the growth rate. However, due to the increasing complexity of root architectures in development, the accurate description of the topology, geometry, and dynamics of a growing root system remains a challenge. RESULTS: We designed a high-throughput phenotyping method, combining an imaging device and an automatic analysis pipeline based on registration and topological tracking, capable of accurately describing the topology and geometry of observed root systems in 2D + t. The method was tested on a challenging Arabidopsis seedling dataset, including numerous root occlusions and crossovers. Static phenes are estimated with high accuracy ([Formula: see text] and [Formula: see text] for primary and second-order roots length, respectively). These performances are similar to state-of-the-art results obtained on root systems of equal or lower complexity. In addition, our pipeline estimates dynamic phenes accurately between two successive observations ([Formula: see text] for lateral root growth). CONCLUSIONS: We designed a novel method of root tracking that accurately and automatically measures both static and dynamic parameters of the root system architecture from a novel high-throughput root phenotyping platform. It has been used to characterise developing patterns of root systems grown under various environmental conditions. It provides a solid basis to explore the GxE interaction controlling the dynamics of root system architecture adaptive responses. In future work, our approach will be adapted to a wider range of imaging configurations and species.

Phenotyping and modeling of root hydraulic architecture reveal critical determinants of axial water transport.

Water uptake by roots is a key adaptation of plants to aerial life. Water uptake depends on root system architecture (RSA) and tissue hydraulic properties that, together, shape the root hydraulic architecture. This work investigates how the interplay between conductivities along radial (e.g. aquaporins) and axial (e.g. xylem vessels) pathways determines the water transport properties of highly branched RSAs as found in adult Arabidopsis (Arabidopsis thaliana) plants. A hydraulic model named HydroRoot was developed, based on multi-scale tree graph representations of RSAs. Root water flow was measured by the pressure chamber technique after successive cuts of a same root system from the tip toward the base. HydroRoot model inversion in corresponding RSAs allowed us to concomitantly determine radial and axial conductivities, providing evidence that the latter is often overestimated by classical evaluation based on the Hagen-Poiseuille law. Organizing principles of Arabidopsis primary and lateral root growth and branching were determined and used to apply the HydroRoot model to an extended set of simulated RSAs. Sensitivity analyses revealed that water transport can be co-limited by radial and axial conductances throughout the whole RSA. The number of roots that can be sectioned (intercepted) at a given distance from the base was defined as an accessible and informative indicator of RSA. The overall set of experimental and theoretical procedures was applied to plants mutated in ESKIMO1 and previously shown to have xylem collapse. This approach will be instrumental to dissect the root water transport phenotype of plants with intricate alterations in root growth or transport functions.

Towards smart and sustainable development of modern berry cultivars in Europe.

Fresh berries are a popular and important component of the human diet. The demand for high-quality berries and sustainable production methods is increasing globally, challenging breeders to develop modern berry cultivars that fulfill all desired characteristics. Since 1994, research projects have characterized genetic resources, developed modern tools for high-throughput screening, and published data in publicly available repositories. However, the key findings of different disciplines are rarely linked together, and only a limited range of traits and genotypes has been investigated. The Horizon2020 project BreedingValue will address these challenges by studying a broader panel of strawberry, raspberry and blueberry genotypes in detail, in order to recover the lost genetic diversity that has limited the aroma and flavor intensity of recent cultivars. We will combine metabolic analysis with sensory panel tests and surveys to identify the key components of taste, flavor and aroma in berries across Europe, leading to a high-resolution map of quality requirements for future berry cultivars. Traits linked to berry yields and the effect of environmental stress will be investigated using modern image analysis methods and modeling. We will also use genetic analysis to determine the genetic basis of complex traits for the development and optimization of modern breeding technologies, such as molecular marker arrays, genomic selection and genome-wide association studies. Finally, the results, raw data and metadata will be made publicly available on the open platform Germinate in order to meet FAIR data principles and provide the basis for sustainable research in the future.

Functional-Structural Plant Modeling Highlights How Diversity in Leaf Dimensions and Tillering Capability Could Promote the Efficiency of Wheat Cultivar Mixtures.

Increasing the cultivated diversity has been identified as a major leverage for the agroecological transition as it can help improve the resilience of low input cropping systems. For wheat, which is the most cultivated crop worldwide in terms of harvested area, the use of cultivar mixtures is spreading in several countries, but studies have seldom focused on establishing mixing rules based on plant architecture. Yet, the aerial architecture of plants and the overall canopy structure are critical for field performance as they greatly influence light interception, plant interactions and yield. The very high number of trait combinations in wheat mixtures makes it difficult to conduct experimentations on this issue, which is why a modeling approach appears to be an appropriate solution. In this study, we used WALTer, a functional structural plant model (FSPM), to simulate wheat cultivar mixtures and try to better understand how differences between cultivars in key traits of the aerial architecture influence mixture performance. We simulated balanced binary mixtures of cultivars differing for different critical plant traits: final height, leaf dimensions, leaf insertion angle and tillering capability. Our study highlights the impact of the leaf dimensions and the tillering capability on the performance of the simulated mixtures, which suggests that traits impacting the plants' leaf area index (LAI) have more influence on the performance of the stand than traits impacting the arrangement of the leaves. Our results show that the performance of mixtures is very variable depending on the values of the explored architectural traits. In particular, the best performances were achieved by mixing cultivars with different leaf dimensions and different tillering capability, which is in agreement with numerous studies linking the diversity of functional traits in plant communities to their productivity. However, some of the worst performances were also achieved by mixing varieties differing in their aerial architecture, which suggests that diversity is not a sufficient criterion to design efficient mixtures. Overall, these results highlight the importance of simulation-based explorations for establishing assembly rules to design efficient mixtures.

Apple tree adaptation to shade in agroforestry: an architectural approach.

PREMISE: The expression of shade adaptation traits is expected to be stronger in low light and can be detrimental to flowering and yield. Our study focused on the expression of shade adaptation traits of apple trees (Malus domestica Borkh. 'Dalinette') in an agroforestry system. METHODS: The architecture of 45 apple trees in their third and fourth year was extensively described and analyzed at the tree scale and compared depending on the light quantity received during the growing season. Flower cluster phenology and the relation between leaf area and floral initiation were also investigated. RESULTS: The number of growing shoots and the leaf area were reduced by shade even if specific leaf area increased with increasing shade. Shade did not modify primary growth but did decrease secondary growth, so that apple tree shoots in shade were slender, with a lower taper and reduced number and proportion of flower clusters. The correlation between floral initiation and leaf area was high both in full and moderate light but not for apple trees in low light. Shade did not impact the date of bud burst and the early phenological stages of flower clusters, but it reduced the number of days at full bloom. CONCLUSIONS: Our results suggest that while the architecture of apple trees is modified by a reduction in light intensity, it is not until a reduction of 65% that the capability to produce fruit is impeded. These results could help optimize the design of apple-tree-based agroforestry systems.

Root phenotyping: important and minimum information required for root modeling in crop plants.

As plants cannot relocate, they require effective root systems for water and nutrient uptake. Root development plasticity enables plants to adapt to different environmental conditions. Research on improvements in crop root systems is limited in comparison with that in shoots as the former are difficult to image. Breeding more effective root systems is proposed as the "second green revolution". There are several recent publications on root system architecture (RSA), but the methods used to analyze the RSA have not been standardized. Here, we introduce traditional and current root-imaging methods and discuss root structure phenotyping. Some important root structures have not been standardized as roots are easily affected by rhizosphere conditions and exhibit greater plasticity than shoots; moreover, root morphology significantly varies even in the same genotype. For these reasons, it is difficult to define the ideal root systems for breeding. In this review, we introduce several types of software to analyze roots and identify important root parameters by modeling to simplify the root system characterization. These parameters can be extracted from photographs captured in the field. This modeling approach is applicable to various legacy root data stored in old or unpublished formats. Standardization of RSA data could help estimate root ideotypes.

Modelling transport of inhibiting and activating signals and their combined effects on floral induction: application to apple tree.

Floral induction (FI) in shoot apical meristems (SAM) is assumed to be triggered by antagonistic endogenous signals. In fruit trees, FI occurs in some SAM only and is determined by activating and inhibiting signals originating from leaves and fruit, respectively. We developed a model (SigFlow) to quantify on 3D structures the combined impact of such signals and distances at which they act on SAM. Signal transport was simulated considering a signal 'attenuation' parameter, whereas SAM fate was determined by probability functions depending on signal quantities. Model behaviour was assessed on simple structures before being calibrated and validated on a unique experimental dataset of 3D digitized apple trees with contrasted crop loads and subjected to leaf and fruit removal at different scales of tree organization. Model parameter estimations and comparisons of two signal combination functions led us to formulate new assumptions on the mechanisms involved: (i) the activating signal could be transported at shorter distances than the inhibiting one (roughly 50 cm vs 1 m) (ii) both signals jointly act to determine FI with SAM being more sensitive to inhibiting signal than activating one. Finally, the genericity of the model is promising to further understand the physiological and architectural determinisms of FI in plants.

A functional structural model of grass development based on metabolic regulation and coordination rules.

Shoot architecture is a key component of the interactions between plants and their environment. We present a novel model of grass, which fully integrates shoot morphogenesis and the metabolism of carbon (C) and nitrogen (N) at organ scale, within a three-dimensional representation of plant architecture. Plant morphogenesis is seen as a self-regulated system driven by two main mechanisms. First, the rate of organ extension and the establishment of architectural traits are regulated by concentrations of C and N metabolites in the growth zones and the temperature. Second, the timing of extension is regulated by rules coordinating successive phytomers instead of a thermal time schedule. Local concentrations are calculated from a model of C and N metabolism at organ scale. The three-dimensional representation allows the accurate calculation of light and temperature distribution within the architecture. The model was calibrated for wheat (Triticum aestivum) and evaluated for early vegetative stages. This approach allowed the simulation of realistic patterns of leaf dimensions, extension dynamics, and organ mass and composition. The model simulated, as emergent properties, plant and agronomic traits. Metabolic activities of growing leaves were investigated in relation to whole-plant functioning and environmental conditions. The current model is an important step towards a better understanding of the plasticity of plant phenotype in different environments.

Simulating the effects of water limitation on plant biomass using a 3D functional-structural plant model of shoot and root driven by soil hydraulics.

BACKGROUND AND AIMS: Improved modelling of carbon assimilation and plant growth to low soil moisture requires evaluation of underlying mechanisms in the soil, roots, and shoots. The feedback between plants and their local environment throughout the whole spectrum soil-root-shoot-environment is crucial to accurately describe and evaluate the impact of environmental changes on plant development. This study presents a 3D functional structural plant model, in which shoot and root growth are driven by radiative transfer, photosynthesis, and soil hydrodynamics through different parameterisation schemes relating soil water deficit and carbon assimilation. The new coupled model is used to evaluate the impact of soil moisture availability on plant productivity for two different groups of flowering plants under different spatial configurations. METHODS: In order to address different aspects of plant development due to limited soil water availability, a 3D FSP model including root, shoot, and soil was constructed by linking three different well-stablished models of airborne plant, root architecture, and reactive transport in the soil. Different parameterisation schemes were used in order to integrate photosynthetic rate with root water uptake within the coupled model. The behaviour of the model was assessed on how the growth of two different types of plants, i.e. monocot and dicot, is impacted by soil water deficit under different competitive conditions: isolated (no competition), intra, and interspecific competition. KEY RESULTS: The model proved to be capable of simulating carbon assimilation and plant development under different growing settings including isolated monocots and dicots, intra, and interspecific competition. The model predicted that (1) soil water availability has a larger impact on photosynthesis than on carbon allocation; (2) soil water deficit has an impact on root and shoot biomass production by up to 90 % for monocots and 50 % for dicots; and (3) the improved dicot biomass production in interspecific competition was highly related to root depth and plant transpiration. CONCLUSIONS: An integrated model of 3D shoot architecture and biomass development with a 3D root system representation, including light limitation and water uptake considering soil hydraulics, was presented. Plant-plant competition and regulation on stomatal conductance to drought were able to be predicted by the model. In the cases evaluated here, water limitation impacted plant growth almost 10 times more than the light environment.

Changes in the vertical distribution of leaf area enhanced light interception efficiency in maize over generations of selection.

Breeders select for yield, thereby indirectly selecting for traits that contribute to it. We tested if breeding has affected a range of traits involved in plant architecture and light interception, via the analysis of a panel of 60 maize hybrids released from 1950 to 2015. This was based on novel traits calculated from reconstructions derived from a phenotyping platform. The contribution of these traits to light interception was assessed in virtual field canopies composed of 3D plant reconstructions, with a model tested in a real field. Two categories of traits had different contributions to genetic progress. (a) The vertical distribution of leaf area had a high heritability and showed a marked trend over generations of selection. Leaf area tended to be located at lower positions in the canopy, thereby improving light penetration and distribution in the canopy. This potentially increased the carbon availability to ears, via the amount of light absorbed by the intermediate canopy layer. (b) Neither the horizontal distribution of leaves in the relation to plant rows nor the response of light interception to plant density showed appreciable trends with generations. Hence, among many architectural traits, the vertical distribution of leaf area was the main indirect target of selection.

Genetic and environmental dissection of biomass accumulation in multi-genotype maize canopies.

Multi-genotype canopies are frequent in phenotyping experiments and are of increasing interest in agriculture. Radiation interception efficiency (RIE) and radiation use efficiency (RUE) have low heritabilities in such canopies. We propose a revised Monteith equation that identifies environmental and genetic components of RIE and RUE. An environmental term, a component of RIE, characterizes the effect of the presence or absence of neighbours on light interception. The ability of a given plant to compete with its neighbours is then identified, which accounts for the genetic variability of RIE of plants having similar leaf areas. This method was used in three experiments in a phenotyping platform with 765 plants of 255 maize hybrids. As expected, the heritability of the environmental term was near zero, whereas that of the competitiveness term increased with phenological stage, resulting in the identification of quantitative trait loci. In the same way, RUE was dissected as an effect of intercepted light and a genetic term. This approach was used for predicting the behaviour of individual genotypes in virtual multi-genotype canopies. A large effect of competitiveness was observed in multi-genotype but not in single-genotype canopies, resulting in a bias for genotype comparisons in breeding fields.

Investigation of complex canopies with a functional-structural plant model as exemplified by leaf inclination effect on the functioning of pure and mixed stands of wheat during grain filling.

BACKGROUND AND AIMS: Because functional-structural plant models (FSPMs) take plant architecture explicitly into consideration, they constitute a promising approach for unravelling plant-plant interactions in complex canopies. However, existing FSPMs mainly address competition for light. The aim of the present work was to develop a comprehensive FSPM accounting for the interactions between plant architecture, environmental factors and the metabolism of carbon (C) and nitrogen (N). METHODS: We developed an original FSPM by coupling models of (1) 3-D wheat architecture, (2) light distribution within canopies and (3) C and N metabolism. Model behaviour was evaluated by simulating the functioning of theoretical canopies consisting of wheat plants of contrasting leaf inclination, arranged in pure and mixed stands and considering four culm densities and three sky conditions. KEY RESULTS: As an emergent property of the detailed description of metabolism, the model predicted a linear relationship between absorbed light and C assimilation, and a curvilinear relationship between grain mass and C assimilation, applying to both pure stands and each component of mixtures. Over the whole post-anthesis period, planophile plants tended to absorb more light than erectophile plants, resulting in a slightly higher grain mass. This difference was enhanced at low plant density and in mixtures, where the erectophile behaviour resulted in a loss of competitiveness. CONCLUSION: The present work demonstrates that FSPMs provide a framework allowing the analysis of complex canopies such as studying the impact of particular plant traits, which would hardly be feasible experimentally. The present FSPM can help in interpreting complex interactions by providing access to critical variables such as resource acquisition and allocation, internal metabolic concentrations, leaf life span and grain filling. Simulations were based on canopies identically initialized at flowering; extending the model to the whole cycle is thus required so that all consequences of a trait can be evaluated.

Plant architecture and foliar senescence impact the race between wheat growth and Zymoseptoria tritici epidemics.

Background and Aims: In order to optimize crop management in innovative agricultural production systems, it is crucial to better understand how plant disease epidemics develop and what factors influence them. This study explores how canopy growth, its spatial organization and leaf senescence impact Zymoseptoria tritici epidemics. Methods: We used the Septo3D model, an epidemic model of Septoria tritici blotch (STB) coupled with a 3-D virtual wheat structural plant model (SPM). The model was calibrated and evaluated against field experimental data. Sensitivity analyses were performed on the model to explore how wheat plant traits impact the interaction between wheat growth and Z. tritici epidemics. Key Results: The model reproduces consistently the effects of crop architecture and weather on STB progress on the upper leaves. Model sensitivity analyses show that the effects of plant traits on epidemics depended on weather conditions. The simulations confirm the known effect of increased stem height and stem elongation rate on limiting STB progress on upper leaves. Strikingly, the timing of leaf senescence is one of the most influential traits on simulated STB epidemics. When the green life span duration of leaves is reduced by early senescence, epidemics are strongly reduced. Conclusions: We introduce the notion of a 'race' for the colonization of emerging healthy host tissue between the growing canopy and the developing epidemics. This race is 2-fold: (1) an upward race at the canopy scale where STB must catch the newly emerging leaves before they grow away from the spore sources; and (2) a local race at the leaf scale where STB must use the resources of its host before it is caught by leaf apical senescence. The results shed new light on the importance of dynamic interactions between host and pathogen.

Modelling interaction dynamics between two foliar pathogens in wheat: a multi-scale approach.

Background and Aims: Disease models can improve our understanding of dynamic interactions in pathosystems and thus support the design of innovative and sustainable strategies of crop protections. However, most epidemiological models focus on a single type of pathogen, ignoring the interactions between different parasites competing on the same host and how they are impacted by properties of the canopy. This study presents a new model of a disease complex coupling two wheat fungal diseases, caused by Zymoseptoria tritici (septoria) and Puccinia triticina (brown rust), respectively, combined with a functional-structural plant model of wheat. Methods: At the leaf scale, our model is a combination of two sub-models of the infection cycles for the two fungal pathogens with a sub-model of competition between lesions. We assume that the leaf area is the resource available for both fungi. Due to the necrotic period of septoria, it has a competitive advantage on biotrophic lesions of rust. Assumptions on lesion competition are first tested developing a geometrically explicit model on a simplified rectangular shape, representing a leaf on which lesions grow and interact according to a set of rules derived from the literature. Then a descriptive statistical model at the leaf scale was designed by upscaling the previous mechanistic model, and both models were compared. Finally, the simplified statistical model has been used in a 3-D epidemiological canopy growth model to simulate the diseases dynamics and the interactions at the canopy scale. Key Results: At the leaf scale, the statistical model was a satisfactory metamodel of the complex geometrical model. At the canopy scale, the disease dynamics for each fungus alone and together were explored in different weather scenarios. Rust and septoria epidemics showed different behaviours. Simulated epidemics of brown rust were greatly affected by the presence of septoria for almost all the tested scenarios, but the reverse was not the case. However, shortening the rust latent period or advancing the rust inoculum shifted the competition more in favour of rust, and epidemics became more balanced. Conclusions: This study is a first step towards the integration of several diseases within virtual plant models and should prompt new research to understand the interactions between canopy properties and competing pathogens.

A robot-assisted imaging pipeline for tracking the growths of maize ear and silks in a high-throughput phenotyping platform.

BACKGROUND: In maize, silks are hundreds of filaments that simultaneously emerge from the ear for collecting pollen over a period of 1-7 days, which largely determines grain number especially under water deficit. Silk growth is a major trait for drought tolerance in maize, but its phenotyping is difficult at throughputs needed for genetic analyses. RESULTS: We have developed a reproducible pipeline that follows ear and silk growths every day for hundreds of plants, based on an ear detection algorithm that drives a robotized camera for obtaining detailed images of ears and silks. We first select, among 12 whole-plant side views, those best suited for detecting ear position. Images are segmented, the stem pixels are labelled and the ear position is identified based on changes in width along the stem. A mobile camera is then automatically positioned in real time at 30 cm from the ear, for a detailed picture in which silks are identified based on texture and colour. This allows analysis of the time course of ear and silk growths of thousands of plants. The pipeline was tested on a panel of 60 maize hybrids in the PHENOARCH phenotyping platform. Over 360 plants, ear position was correctly estimated in 86% of cases, before it could be visually assessed. Silk growth rate, estimated on all plants, decreased with time consistent with literature. The pipeline allowed clear identification of the effects of genotypes and water deficit on the rate and duration of silk growth. CONCLUSIONS: The pipeline presented here, which combines computer vision, machine learning and robotics, provides a powerful tool for large-scale genetic analyses of the control of reproductive growth to changes in environmental conditions in a non-invasive and automatized way. It is available as Open Source software in the OpenAlea platform.

Virtual Plants Need Water Too: Functional-Structural Root System Models in the Context of Drought Tolerance Breeding.

Developing a sustainable agricultural model is one of the great challenges of the coming years. The agricultural practices inherited from the Green Revolution of the 1960s show their limits today, and new paradigms need to be explored to counter rising issues such as the multiplication of climate-change related drought episodes. Two such new paradigms are the use of functional-structural plant models to complement and rationalize breeding approaches and a renewed focus on root systems as untapped sources of plant amelioration. Since the late 1980s, numerous functional and structural models of root systems were developed and used to investigate the properties of root systems in soil or lab-conditions. In this review, we focus on the conception and use of such root models in the broader context of research on root-driven drought tolerance, on the basis of root system architecture (RSA) phenotyping. Such models result from the integration of architectural, physiological and environmental data. Here, we consider the different phenotyping techniques allowing for root architectural and physiological study and their limits. We discuss how QTL and breeding studies support the manipulation of RSA as a way to improve drought resistance. We then go over the integration of the generated data within architectural models, how those architectural models can be coupled with functional hydraulic models, and how functional parameters can be measured to feed those models. We then consider the assessment and validation of those hydraulic models through confrontation of simulations to experimentations. Finally, we discuss the up and coming challenges facing root systems functional-structural modeling approaches in the context of breeding.