Comparative in vitro evaluation of microgap in titanium stock versus cobalt-chrome custom abutments on a conical connection implant: Effect of crown cementation and ceramic veneering.

OBJECTIVE: To compare the implant-abutment connection microgap between computer-aided design and computer-aided manufacturing (CAD/CAM) milled or laser-sintered cobalt-chrome custom abutments with or without ceramic veneering and titanium stock abutments with or without crown cementation. MATERIAL AND METHODS: Six groups of six abutments each were prepared: (1) CAD/CAM cobalt-chrome custom abutments: milled, milled with ceramic veneering, laser-sintered, and laser-sintered with ceramic veneering (four groups: MIL, MIL-C, SIN, and SIN-C, respectively) and (2) titanium stock abutments with or without zirconia crown cementation (two groups: STK and STK-Z, respectively). Abutments were screwed to the implants by applying 30 Ncm torque. All 36 samples were sectioned along their long axes. The implant-abutment connection microgap was measured using scanning electron microscopy on the right and left sides of the connection at the upper, middle, and lower levels. Data were analyzed using the Kruskal-Wallis test (p < .05). RESULTS: Mean values (µm) of the microgap were 0.54 ± 0.44 (STK), 0.55 ± 0.48 (STK-Z), 1.53 ± 1.30 (MIL), 2.30 ± 2.2 (MIL-C), 1.53 ± 1.37 (SIN), and 1.87 ± 1.8 (SIN-C). Although significant differences were observed between the STK and STK-Z groups and the other groups (p < .05), none were observed between the milled and laser-sintered groups before or after ceramic veneering. The largest microgap was observed at the upper level in all groups. CONCLUSIONS: Titanium stock abutments provided a closer fit than cobalt-chrome custom abutments. Neither crown cementation nor ceramic veneering resulted in significant changes in the implant-abutment connection microgap.

Current applications of 3D printing in dental implantology: A scoping review mapping the evidence.

OBJECTIVES: This scoping review aimed to identify the available evidence in the use of 3D printing technology in dental implantology. Due to the broad scope of the subject and its application in implantology, three main areas of focus were identified: (1) customized dental implants, (2) manufacturing workflow for surgical implant guides, and (3) related implant-supported prostheses factors, which include the metallic primary frameworks, secondary ceramic or polymer superstructures, and 3D implant analog models. MATERIALS AND METHODS: Online databases (Medline, Cochrane, Embase, and CINAHL) were used to identify the studies published up to February 2023 in English. Two experienced reviewers performed independently the screening and selection among the 1737 studies identified. The articles evaluated the additive manufacturing (AM) technology, materials, printing, and post-processing parameters regarding dental implantology. RESULTS: The 132 full-text studies that met the inclusion criteria were examined. Thirteen studies of customized dental implants, 22 studies about the workflow for surgical implant guides, and 30 studies of related implant-supported prostheses factors were included. CONCLUSIONS: (1) The clinical evidence about AM titanium and zirconia implants is scarce. Early data on survival rates, osseointegration, and mechanical properties are being reported. (2) 3D printing is a proven manufacturing technology to produce surgical implant guides. Adherence to the manufacturer's instructions is crucial and the best accuracy was achieved using MultiJet printer. (3) The quality of 3D printed prosthetic structures and superstructures is improving remarkably, especially on metallic alloys. However, better marginal fit and mechanical properties can be achieved with milling technology for metals and ceramics.

Influence of age, training, intraoral scanner, and software version on the scan accuracy of inexperienced operators.

PURPOSE: To evaluate the effect of operator age on the scan accuracy (trueness and precision) of inexperienced operators when compared with experienced operators, and how training, intraoral scanner (IOS), and software version affect scan accuracy. MATERIAL AND METHODS: Thirty-four operators were sorted into groups: G1 (operators <25 years old, no experience), G2 (operators >40 years old, no experience), and G3 (experienced IOS operators). They conducted partial-arch scans before and after a 4-session training with two IOSs (Trios 3 and True Definition) and two software versions. These scans were compared with the reference scans obtained from conventional impressions and a laboratory scanner (IScan D103i) to evaluate trueness (mean root mean square values) and precision (standard deviation of root mean square values) with a software program (Geomagic Control X). Kruskal-Wallis and post-hoc Dunn's tests were used to evaluate the effect of age on the scan accuracy of inexperienced groups when compared with experienced operators, while the effect of training, IOS, and software version on scan accuracy was evaluated with Wilcoxon or Mann-Whitney U tests (α = 0.05). RESULTS: Before training, G1 and G2 scans had similar accuracy (p ≥ 0.065). After training, G1 scans had higher accuracy when IOS data was pooled and had higher precision with TD (p ≤ 0.004). Training increased the scan accuracy (p < 0.001), while newer software increased the trueness of inexperienced operator scans (p = 0.015). CONCLUSIONS: Age affected the scan accuracy of inexperienced operators after training, indicating that extended training may be required for older operators. Training increased the scan accuracy, and newer software increased the trueness of inexperienced operator scans.

The effect of a convergent transmucosal neck on soft tissues and radiographic outcomes: a 1-year follow-up randomized controlled trial.

PURPOSE: The aim of this randomized controlled clinical trial was to evaluate peri-implant marginal bone levels (MBLs) and soft tissue dimension changes 1 year after loading. Patients in the control group received bone-level implants, whereas in the test group, tissue-level implants with a convergent transmucosal neck were used. MATERIAL AND METHODS: MBLs were calculated by measuring the distance from the implant shoulder to the first visible bone-to-implant contact using standardized periapical digital radiographs. Baseline (day of loading) and follow-up digital models obtained with an intraoral scanner were used to quantify the changes in the peri-implant soft tissue dimensions with a best-fit algorithm. RESULTS: The difference between final and baseline MBLs showed a mean bone loss of 0.16 ± 0.01 mm in the test group (n = 15) and 0.45 ± 0.09 mm in the control group (n = 14) (p > 0.05). Soft tissue contour at the level of the gingival margin (GM) increased by 1.96 ± 2.69 mm in the test group and 0.65 ± 0.42 mm in the control group (p = 0.167). Both groups showed a coronal displacement of the gingival margin with no significant differences among them. CONCLUSIONS: The present study demonstrated peri-implant hard and soft tissues stability at both implant designs with no significant differences 12 months after loading. CLINICAL RELEVANCE: There is still insufficient scientific evidence to demonstrate the role and advantages of the convergent transmucosal neck on the behavior of the peri-implant soft and hard tissues stability compared to a straight neck in bone-level implants 12 months after loading.

Accuracy of five different 3D printing workflows for dental models comparing industrial and dental desktop printers.

OBJECTIVES: The aim of this study was to evaluate the accuracy, in terms of trueness and precision, of printed models using five different industrial and dental desktop 3D printers. MATERIALS AND METHODS: Full-arch digital models with scanbodies of 15 patients were printed with five different 3D printers. The industrial printers were 3D system Project MJP2500 (3DS) and Objet30 OrthoDesk (Obj). The dental desktop printers were NextDent 5100 (ND), Formlabs Form 2 (FL) and Rapidshape D30 (RS). A total of 225 printed models were analysed. The printed models were digitized and compared with the reference cast model using the Control X software (Geomagic). The descriptive statistics and one-way ANOVA with the post hoc Tukey test were performed (α = 0.05). RESULTS: The one-way ANOVA for the trueness and precision of the printed model presented the best results for the 3DS, followed by ND, Obj, FL and RS (P < 0.01). In the scanbody zone, the best results were for the 3DS group, followed by Obj, ND, FL and RS (P < 0.01). Comparing the technologies, the Multijet technology used in industrial printers presented better results than the DLP and SLA technologies used in dental desktop printers (P > 0.01). CONCLUSIONS: There were statistically significant differences in terms of the accuracy of the printed models, with better results for the industrial than the dental desktop 3D printers. CLINICAL RELEVANCE: The industrial 3D printers used in dental laboratories presented better accuracy than the in-office dental desktop 3D printers, and this should be considered when the best accuracy is needed to perform final prosthetic restorations.

Diagnosis of Interproximal Caries Lesions in Bitewing Radiographs Using a Deep Convolutional Neural Network-Based Software.

The aim of this study was to evaluate the diagnostic reliability of a web-based artificial intelligence program for the detection of interproximal caries in bitewing radiographs. Three hundred bitewing radiographs of patients were subjected to the evaluation of a convolutional neural network. First, the images were visually evaluated by a previously trained and calibrated operator with radiodiagnosis experience. Then, ground truth was established and was clinically validated. For enamel caries, clinical assessment included a combination of clinical-visual and radiography evaluations. For dentin caries, clinical validation was performed by instrumentally accessing the cavity. Second, the images were uploaded and analyzed by the web-based software. Four different models were established to analyze its evaluations according to the confidence threshold (0-100%) offered by the program: model 1 (values >0% were considered positive and values of 0% were considered negative), model 2 (values ≥25% were considered positive and values <25% were considered negative), model 3 (values ≥50% were considered positive and values <50% were considered negative), and model 4 (values ≥75% were considered positive and values <75% were considered negative). The accuracy rate (A), sensitivity (S), specificity (E), positive predictive value (PPV), negative predictive value (NPV), positive likelihood ratio (PLR), negative likelihood ratio (NLR), and areas under receiver operating characteristic curves (AUC) were calculated for the four models of agreement with the software. Models showed the following results respectively: A = 70.8%, 82%, 85.6%, 86.1%; S = 87%, 69.8%, 57%, 41.6%; E = 66.3%, 85.4%, 93.7%, 98.5%; PPV = 42%, 57.2%, 71.6%, 88.6%; NPV = 94.8%, 91%, 88.6%, 85.8%; PLR = 2.58, 4.78, 9.05, 27.73; NLR = 0.2, 0.35, 0.46, 0.59; AUC = 0.767, 0.777, 0.753, 0.701. Findings in the present study suggest that the artificial intelligence web-based software provides a good diagnostic reliability on the detection of dental caries. Our study highlighted model 2 for showing the best results to differentiate between healthy teeth and decayed teeth.

Clinical outcomes of the biologically oriented preparation technique (BOPT) in fixed dental prostheses: A systematic review.

STATEMENT OF PROBLEM: The biologically oriented preparation technique is a concept with a vertical tooth preparation, gingitage, an immediate interim restoration preserving the clot, and a specific laboratory technique aiming to adapt the marginal periodontal tissue to a remodeled emergence profile of the crown. However, the published scientific evidence on this subject is limited. PURPOSE: The purpose of this systematic review was to analyze whether using the biologically oriented preparation technique leads to improved clinical outcomes in terms of probing depth, gingival inflammation index, gingival marginal stability, and fewer mechanical and biological complications. MATERIAL AND METHODS: Recommendations from the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines were used in this systematic review. An electronic search of the MEDLINE/PubMed, EMBASE, Science Direct, Wiley Online Library, Cochrane, and ProQuest databases was made for articles published between March 2010 and July 2021 using keywords. Three reviewers selected and analyzed all articles that mentioned the biologically oriented preparation technique and met the inclusion criteria. RESULTS: A total of 6 articles met the inclusion criteria: 1 prospective randomized clinical study, 1 randomized clinical study, 1 prospective clinical study, and 3 case series. According to these studies, of all the teeth treated with the biologically oriented preparation technique, probing depth (greater than 3 mm) increased in only 2.3%, gingival inflammation was present in 22.8%, gingival recession occurred in 1.7% (decreased gingival stability), and mechanical and biological failures occurred in 4.4% of the teeth. CONCLUSIONS: Fixed dental prosthesis treatments performed following the concept of the biologically oriented preparation technique did not increase probing depth and showed a moderate rate of gingival inflammation, lower recession rates, and lower mechanical and biological failures at the 5-year follow-up. The biologically oriented preparation technique appears to be a viable alternative technique for obtaining satisfactory and stable clinical results up to 5 years. Long-term randomized clinical trials are recommended to reach more conclusions about this protocol.

Accuracy of a guided implant system with milled surgical templates.

PURPOSE: This in vitro study analyzed the accuracy of a computer-assisted design (CAD)/computer-assisted manufacturing (CAM) guided implant surgery system by comparing linear, angular, and coronal deviations between the planned and final implant placement. METHODS: By using a fully guided surgery workflow, 32 dental implants were placed in 16 partially edentulous models. After virtual design of the restorations, radiological and CAD files were matched and implant positions were planned by using dedicated implant planning software (Galileo Implant version 1.9.2.). Templates were designed (Cerec Omnicam) and milled (Cerec MC XL) by using chairside workflow. Galileo Implant version 1.9.2. was used to evaluate accuracy. RESULTS: Mean horizontal and angular-coronal total deviation values were 0.2 mm (SD = 0.126) and 1.1º (SD = 0.834) respectively. Multivariate analysis of variance showed significant differences in horizontal and angular-coronal total deviation in the 32 implants (P = 0.0001). Multivariate analysis with one-factor interaction showed no statistical difference in implant position or implant type (P = 0.139) between eight maxilla models and eight jaw models. CONCLUSION: Horizontal and angular-coronal deviations of implants placed with chairside digital workflow were within the recommended safety margin for fully guided surgery.

Influence of customized over-scan body rings on the intraoral scanning effectiveness of a multiple implant edentulous mandibular model.

OBJECTIVES: To evaluate the effectiveness of intraoral scanning with identical multiple implant scan bodies (ISB) using customized over scan body rings (COR) as an auxiliary system. METHODS: Six printed rings with different diameters and shapes were attached at different levels to each identical ISB of an edentulous mandibular master model. The master model was scanned using an intraoral scanner (Primescan CEREC) until valid digital models for the COR group (n=10) and for the unmodified ISB (UN) group (n=10) were obtained. The total scanning times and the number of rescans required was registered. To assess differences between scanning efficiency the Student T-test and Mann Whitney U-Test were applied. A Coordinate Measuring Machine (CMM) was used to register the reference model. To evaluate accuracy discrepancies between the test scans (n=20) and the reference model, Geomagic Control X was used. Mann Whitney U-test was applied to calculate statistically significant differences. RESULTS: To achieve a valid model, an average of 4.70 rescans / repetitions were required for the UN group, whereas for the COR group required an average of 1.40 rescans (p<.001). Mean total scanning time was 201.10 s and 542.40 s for the COR and UN group, respectively (p=.001). No statistically significant differences were found between the groups in terms of accuracy (p>.05) with respectively COR and UN values; mean linear trueness 34.38 µm and 31.14 µm, mean linear precision 22.94 µm and 18.51 µm, mean angular trueness 0.12° and 0.14°, mean angular precision 0.075° and 0.08°. CONCLUSION: The use of the COR system may increase the scanning efficiency of multiple implants with similar ISBs without impacting the accuracy.

The importance of esthetic integration through laboratory adaptation profiles in the biologically oriented preparation technique.

The biologically oriented preparation technique (BOPT) has revolutionized the execution of fixed prosthetic treatments, ensuring tissue stability and the integration of the gingival tissue with the prosthetic restorations. BOPT follows both a clinical and laboratory sequence; the two must be perfectly integrated and synchronized, with the phase of preparation and temporary restorations in the clinic correlating with a well-founded and protocolized execution of the laboratory steps. In turn, prosthetic work returned to the clinic must show perfect integration between the prosthesis, the preparation, and the periodontal tissue, with a balance between pink and white esthetics. The clinical case in the present article illustrates the close relationship between the clinical and laboratory steps, including the technical laboratory procedures, that make it possible to achieve these objectives. The aim of the article is to introduce the concept of the prosthetic adaptation profile of new restorations, establishing the definition, importance, and direct relationship of this profile with the success of the rehabilitation treatment.

Original vs compatible stock abutment- implant connection: An in vitro analysis of the internal accuracy and mechanical fatigue behaviour.

PURPOSE: To assess the internal accuracy and mechanical behaviour under cyclic loading after artificial aging of implant-supported crowns restored with original stock abutments and two compatible non-original stock abutments. METHODS: Forty-eight original internal hexagon connection implants were connected to different stock abutments. The samples were divided into three groups depending on the manufacturer of the abutment components (one original, two non-originals).Firstly, samples were cross-sectioned and observed by using Scanning Electron Microscope (SEM) to evaluate the internal accuracy in three different implant-abutment interface locations (platform, internal and screw).Further, cyclic fatigue loading was carried out according to the ISO Norm 14801 using dynamic testing machine under sinusoidal loads for 2,000,000 cycles at test frequencies of 2 Hz in air after thermocycling with 10,000 cycles at 5 °C and 55 °C in artificial saliva for aging simulation. RESULTS: Original abutment components presented the highest percentage of surface with tight contact with the implant in the three implant-abutment interfaces studied. Additionally, original configuration showed highest fatigue limit value and fatigue strength exponent (280 N and -0.054) than non-original 1 (225 N and -0.109) and non-original 2 (200 N and -0.101). CONCLUSION: Original abutment components provide better fit and mechanical results under cyclic loading than non-original configurations. The results obtained in this study seem to suggest that the use of the original stock abutments to implants leads to a more homogeneous load distribution between the components that can influence the long-term success of the restorations.

Clinical study comparing the accuracy of interocclusal records, digitally obtained by three different devices.

OBJECTIVE: The aim of the present cross-sectional study was to compare the interocclusal contact records obtained by three different digital methods (intra- and extraoral digital scanners and T-Scan III system) with the conventional method (articulating paper). MATERIALS AND METHODS: Twenty-five healthy volunteers were selected. As a control group, maximum intercuspation occlusal contacts were registered and photographed from the patients with an 8 µm articulating paper. Then, intraoral conventional elastomer impressions were taken and after obtaining the corresponding plaster models of every patient they were scanned with an extraoral scanner (Zfx Evolution, Zimmer Biomet Dental) (group 1). Moreover, digital impressions were made with an intraoral scanner (Trios Color POD, Phibo, 3Shape) and contacts were also registered (group 2). Finally, T-Scan III records were made and stored for further analysis (group 3). Two previously calibrated examiners independently evaluated the interocclusal contacts from every group. Data was analyzed by using Kappa index test and Pearson's chi-square test. Diagnostic tests and ROC curve were also performed. RESULTS: Kappa interoperator index was 70.6% (better agreement). In Kappa intraoperator index, the best value was obtained in the intraoral scanner group (moderate agreement) and the worst with T-Scan III group (low agreement). ROC curve showed highest values in the intraoral scanner group (0.817) and lowest values in the T-Scan III group (0.613). CONCLUSION: Results suggest greater reliability to record occlusal contacts with the intraoral scanner. CLINICAL RELEVANCE: Intraoral scanners seem to be reliable in registering intermaxillary occlusal contacts when compared with the current gold standard.

Efficacy and risks of tooth-supported prostheses in the treatment of partially edentulous patients with stage IV periodontitis. A systematic review and meta-analysis.

AIM: The aim was to evaluate the efficacy and effectiveness of tooth-supported fixed prostheses in partially edentulous patients with stage IV periodontitis. MATERIAL AND METHODS: Randomized and controlled clinical trials (RCTs and CCTs) and prospective/retrospective cohort studies or case series were searched in three databases. Survival rate of abutment teeth was considered the primary outcome. Meta-analyses were performed whenever possible. RESULTS: Twenty-four publications were included. No RCTs or CCTs compared the efficacy of tooth-supported fixed prostheses between patients with severe periodontitis or non-periodontitis patients. Most of the data retrieved were derived from case series. The incidence of abutment-tooth loss after a follow-up period from 2 to 35.4 years was low (n = 17 studies; weighted mean incidence (WMI) = 4.8%; confidence interval (CI) [3.2, 6.5]). The corresponding figure for prostheses failure was WMI = 6.9% (n = 18; 95% CI [4.1, 9.7]). Technical complications seemed to be more frequent than biological complications (caries, endodontic failure, root fracture, etc.). Periodontal outcomes tended to remain stable over time. CONCLUSION: Tooth-supported fixed prostheses seemed to be a valid treatment approach to restore masticatory function in patients with stage IV periodontitis once periodontal therapy has been accomplished. However, the comparative efficacy of this treatment among periodontitis and non-periodontitis patients is unclear due to the absence of clinical trials.

Influence of age and scanning system on the learning curve of experienced and novel intraoral scanner operators: A multi-centric clinical trial.

OBJECTIVES: To evaluate the effect of age and intra-oral scanner (IOS) on the learning curve of inexperienced operators. METHODS: Thirty-four operators pertaining to 1 of 3 groups: (G1) students ≤ 25 years (y), (G2) dentists ≥ 40y, and (G3) a control group of experienced IOS operators (no age limitation), were included. All participants performed baseline and final quadrant scans on a volunteer subject, before and after a training program of 3 sessions, with two different IOS: TRIOS 3 (S1) and True Definition (S2). Baseline and final scanning times were registered in seconds. A Pearson correlation was applied to evaluate the correlation between age and scanning time. An ANOVA of repeated measures test was applied to evaluate inter-group (G1, G2, G3) and inter-system performance. Significance level was set at a = 0.05. RESULTS: Age and scanning time for inexperienced operators showed a weak positive correlation for final scanning time (r = 0.29, p < 0.05). When comparing groups and filtering by IOS, S1 failed to show differences between groups (p > 0.05). With S2, the control group demonstrated a better performance than G2 (p < 0.05), while G1 only demonstrated a better performance than G2 at final scanning time (p = 0.005). Overall, the type of IOS had a significant impact on the scanning time (p < 0.001). CONCLUSION: Results from this study indicate that age and type of IOS have an impact on the performance and learning curve of inexperienced IOS operators. CLINICAL SIGNIFICANCE: Gaining knowledge on how different aspects, such as age, experience or IOS system, influence the learning curve to IOSs is relevant due to the financial and strategical impact associated with the acquisition of an IOS.

Mechanical Performance of Chairside Ceramic CAD/CAM Restorations and Zirconia Abutments with Different Internal Implant Connections: In Vitro Study and Finite Element Analysis.

(computer-aided design-computer-aided manufacturing) CAD/CAM monolithic restorations connected to zirconia abutments manufactured with a chairside workflow are becoming a more common restorative option. However, their mechanical performance is still uncertain. The aim of this study was to evaluate the mechanical behavior of a combination of a zirconia abutment and monolithic all-ceramic zirconia and lithium disilicate crown manufactured with a chairside workflow, connected to titanium implants with two types of internal connection-tube in tube connection and conical connection with platform switching. They were thermally cycled from 5 °C to 55 °C and were subjected to a static and fatigue test following ISO 14801. The fractured specimens from the fatigue test were examined by SEM (scanning electron microscopy). Simulations of the stress distribution over the different parts of the restorative complex during the mechanical tests were evaluated by means of (finite element analysis) FEA. The mechanical performance of the zirconia abutment with an internal conical connection was higher than that of the tube in tube connection. Additionally, the use of disilicate or zirconia all-ceramic chairside CAD/CAM monolithic restorations has similar results in terms of mechanical fracture and fatigue resistance. Stress distribution affects the implant/restoration complex depending on the connection design. Zirconia abutments and monolithic restorations seem to be highly reliable in terms of mechanical resistance.

Original versus nonoriginal cast-to-gold abutment-implant connection: Analysis of the internal fit and long-term fatigue performance.

STATEMENT OF PROBLEM: Restoring implants with nonoriginal abutments is common. However, studies that evaluated compatible abutments with long-term fatigue performance are lacking. PURPOSE: The purpose of this in vitro study was to assess the internal fit and the cyclic fatigue life after artificial aging of 3 implant-abutment configurations restored with 1 original and 2 compatible nonoriginal cast-to-gold abutments. MATERIAL AND METHODS: Forty-eight original internal hexagon connection implants were connected to 3 different brands of abutments (n=16): 1 original to the implant system and the other 2 with nonoriginal abutments. Internal fit and the percentage of surface with tight contact were assessed by scanning electron microscopy in 12 cross-sectioned specimens (n=4) at 3 different areas (platform, internal, and screw). Thirty-six implant-abutment-crown specimens (n=12) were immersed in artificial saliva and thermocycled for 10 000 cycles between 5 °C and 55 °C. Subsequently, a cyclic load test, as per International Organization for Standardization (ISO) Standard 14 801, was completed in a universal testing machine at 2 Hz in air. RESULTS: The original abutments presented the best fit and highest percentage of tight contact in the internal areas. In addition, the original abutments showed the lower cyclic fatigue strength degradation and the highest long-term success. CONCLUSIONS: Occlusal loads are transferred more homogenously through the system when original abutments are used because of the better fit between the internal components, leading to increased fatigue resistance.

Esthetic Outcomes of Implant-Supported Single Crowns Related to Abutment Type and Material: A Systematic Review.

PURPOSE: To systematically review the influence of abutment material and configuration on the soft tissue esthetic outcomes of implant-supported single crowns (iSCs) after 3 years. MATERIALS AND METHODS: An electronic search on MEDLINE (PubMed) from January 2000 to July 2019 was conducted for clinical trials with no language restrictions. The focus question was: In partially edentulous patients with iSCs, does the abutment material (metal vs ceramic) or the configuration (standardized vs customized) have an effect on the soft tissue esthetic outcomes? Randomized controlled trials, controlled clinical trials, and prospective or retrospective case series with at least 10 patients and a minimum of 3 years of follow-up were included. The esthetic outcomes Pink Esthetic Score (PES), PES/White Esthetic Score (WES; ie, modPES), Papilla Index (PI), soft tissue recession, and papilla height change were extracted. Meta-analysis was performed when applicable. RESULTS: Of the 6,399 titles identified, 27 studies were included. Combined mean PES/modPES scores, translated into a scale of 0 to 100, were 68.8 for ceramic, 74.2 for metal (P = .392), 71.9 for customized, and 71.3 for standard (P = .981) abutments. Mean soft tissue recession was also similar between the abutment groups, abutment material (P = .850), and configuration (P = .849), ranging from -1.09 mm to +0.59 mm gain. Papilla height changes ranged from -1.22 mm to +1.0 mm gain. The reported mean PI was 2.16 for customized, 2.06 for standard (P = .552), 2.01 for ceramic, and 2.28 for metallic (P = .04) abutments. CONCLUSION: This systematic review showed that the abutment material and configuration had minimal impact on the evaluated soft tissue esthetic outcomes. Future research focusing on the included parameters in a randomized controlled manner is needed to validate the present findings.

Influence of different cleaning procedures on the shear bond strength of 10-methacryloyloxydecyl dihydrogen phosphate-containing self-adhesive resin cement to saliva contaminated zirconia.

Purpose To evaluate the effect of different cleaning methods on the shear bond strength (SBS) of a 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing self-adhesive resin cement to zirconia after saliva contamination.Methods Sixty zirconia specimens were randomly divided into four groups (n=15) according to treatment surface. Except for the control group, all samples were contaminated with saliva and were then rinsed with water-spray and air-dried. Subsequently, the specimens were either treated with a cleaning paste (CP), with argon plasma (AP), or did not undergo an additional cleaning process (WS). An MDP-containing self-adhesive resin cement was applied onto the ceramic surfaces. Specimens were stored in water (24 hours) followed by thermocycling (5°C to 55°C for 10.000 cycles). SBS tests were performed in a universal testing machine, and the results (MPa ± SD) were statistically analyzed using ANOVA and Bonferroni post-hoc test. Fractured surfaces were examined to identify the failure types using a stereomicroscopy and SEM.Results The surface cleaning treatment (p<0.05) significantly affected the results. The highest SBS values were observed in the control group (12.16 ± 1.22 MPa) and were statistically comparable to values for the CP group (11.38 ± 1.65 MPa). The AP group (9.17 ± 1.06 MPa) showed significantly higher bond strength than the WS group (6.95 ± 1.20 MPa), but it showed significantly lower strength than the control and CP groups.Conclusions The CP application was the most effective method in removing saliva contamination. The AP treatment could not restore the SBS to the same level as uncontaminated specimens.

Accuracy of digitization obtained from scannable and nonscannable elastomeric impression materials.

STATEMENT OF PROBLEM: Elastomeric impression materials have been marketed for optimizing direct digital acquisition without requiring a stone cast. The trueness and precision of the digitization of these new elastomeric impression materials are unclear. PURPOSE: The purpose of this in vitro study was to compare the trueness and precision of digital dental casts obtained from the direct digitization of 2 types of vinylsiloxanether (VSXE) impression materials by using a laboratory laser scanner. MATERIAL AND METHODS: Thirty-eight elastomeric impressions were made of a master die with a similar morphology to a premolar crown preparation. The impression materials were Identium (IDE) and Identium Scan (SCAN), designed for direct digitalization. Each impression was digitalized by using an optical scanner to create digital casts. A computer-aided design (CAD) reference model of trueness (CRM) was created and aligned to each digital cast for digital 3-dimensional discrepancy analysis. RESULTS: The mean ±standard deviation global trueness of IDE was 53 ±16 µm and that of SCAN was 46 ±3 µm. SCAN digital casts showed higher precision (58 ±5 µm) than IDE (69 ±18 µm) (P<.05). At the margin of the preparation and at the axial surfaces, SCAN models showed higher trueness (3 ±6 µm and 1 ±5 µm) than IDE (15 ±10 µm and 2 ±37 µm), respectively. CONCLUSIONS: Scannable impressions could be digitalized with higher global precision than conventional elastomeric materials. Higher trueness could be achieved in specific impression locations such as gingival areas or axial walls of preparations, where the light emitted by the scanner was not blocked.