Optimizing Thermoelectric Properties through Compositional Engineering in Ag-Deficient AgSbTe2 Synthesized by Arc Melting.

Thermoelectric materials offer a promising avenue for energy management, directly converting heat into electrical energy. Among them, AgSbTe2 has gained significant attention and continues to be a subject of research at further improving its thermoelectric performance and expanding its practical applications. This study focuses on Ag-deficient Ag0.7Sb1.12Te2 and Ag0.7Sb1.12Te1.95Se0.05 materials, examining the impact of compositional engineering within the AgSbTe2 thermoelectric system. These materials have been rapidly synthesized using an arc-melting technique, resulting in the production of dense nanostructured pellets. Detailed analysis through scanning electron microscopy (SEM) reveals the presence of a layered nanostructure, which significantly influences the thermoelectric properties of these materials. Synchrotron X-ray diffraction reveals significant changes in the lattice parameters and atomic displacement parameters (ADPs) that suggest a weakening of bond order in the structure. The thermoelectric characterization highlights the enhanced power factor of Ag-deficient materials that, combined with the low glass-like thermal conductivity, results in a significant improvement in the figure of merit, achieving zT values of 1.25 in Ag0.7Sb1.12Te2 and 1.01 in Ag0.7Sb1.12Te1.95Se0.05 at 750 K.

Magnetoimpedance spectroscopy of phase-separated La0.5Ca0.5MnO3 polycrystalline manganites.

Magnetoimpedance spectroscopy was carried out on phase-separated La0.5Ca0.5MnO3 polycrystalline manganites. The La0.5Ca0.5MnO3 powder was synthesized following an adapted sol-gel route. Structural and magnetic data showed the signs of phase coexistence of ferromagnetic (FM) Pnma and charge-ordered antiferromagnetic (CO-AFM) P21/m phases. Magnetization vs. temperature (M vs. T) measurements revealed several magnetic transitions from the high temperature paramagnetic (PM) to an FM phase upon cooling (PM-FM) at ≈240 K, FM-AFM (≈170 K) and AFM-FM (≈100 K). Magnetic field (H)-dependent impedance spectroscopy data were collected from sintered pellets and fitted with an equivalent circuit model to separately analyze the different dielectric contributions from the grain boundary (GB) and the grain interior bulk areas. This allowed separating the GB and bulk magnetoresistance (MR), which was shown to amount to a maximum of ≈80% for both GB and bulk at H = 10 T near the metal-insulator transition (MIT) at ≈100 K. The GB resistance was found to be larger than the bulk resistance by a factor of ≈3, which implies that the direct current (DC) resistance and DC MR are dominated by contributions from the GBs. The magnetocapacitance (MC) effects detected were all found to be small below ≈3%, including in the presence of a CO phase.

In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics.

Establishing a 3D electrically percolating network in an insulating matrix is key to numerous engineering and functional applications. To this end, using hydrophobic carbon nanofillers is tempting, but still results in suboptimal performance due to processing challenges. Here, we demonstrate how natural cellulose nanofibres can be in situ transformed into graphene-like sheets connected to a 3D network enhancing both the transport and the mechanical properties of sintered engineering ceramics. The network architecture also permits the decoupling of electrical and thermal conductivities, which represents a major obstacle in attaining efficient thermoelectric materials. We foresee that our transferable methodology can pave the way for the use of natural nanofibres to unravel the full potential of 3D graphene-like networks to accelerate development in fields like energy and telecommunications.

Microwave-Assisted Synthesis, Microstructure, and Magnetic Properties of Rare-Earth Cobaltites.

The series of perovskite rare-earth (RE) doped cobaltites (RE)CoO3 (RE = La-Dy) was prepared by microwave-assisted synthesis. The crystal structure undergoes a change of symmetry depending on the size of the RE cation. LaCoO3 is rhombohedral, S.G. R3̅c (No. 167), while, for the rest of the RE series (Pr-Dy), the symmetry is orthorhombic, S.G. Pnma (No. 62). The crystal structure obtained by X-ray diffraction was confirmed by high-resolution transmission electron microscopy, which yielded a good match between experimental and simulated images. It is further shown that the well-known magnetism in LaCoO3, which involves a thermally induced Co3+ (d6) low spin to intermediate or high spin state transition, is strongly modified by the RE cation, and a rich variety of magnetic order has been detected across the series.

The impact of charge transfer and structural disorder on the thermoelectric properties of cobalt intercalated TiS2.

A family of phases, Co x TiS2 (0 ≤ x ≤ 0.75) has been prepared and characterised by powder X-ray and neutron diffraction, electrical and thermal transport property measurements, thermal analysis and SQUID magnetometry. With increasing cobalt content, the structure evolves from a disordered arrangement of cobalt ions in octahedral sites located in the van der Waals' gap (x ≤ 0.2), through three different ordered vacancy phases, to a second disordered phase at x ≥ 0.67. Powder neutron diffraction reveals that both octahedral and tetrahedral inter-layer sites are occupied in Co0.67TiS2. Charge transfer from the cobalt guest to the TiS2 host affords a systematic tuning of the electrical and thermal transport properties. At low levels of cobalt intercalation (x < 0.1), the charge transfer increases the electrical conductivity sufficiently to offset the concomitant reduction in |S|. This, together with a reduction in the overall thermal conductivity leads to thermoelectric figures of merit that are 25% higher than that of TiS2, ZT reaching 0.30 at 573 K for Co x TiS2 with 0.04 ≤ x ≤ 0.08. Whilst the electrical conductivity is further increased at higher cobalt contents, the reduction in |S| is more marked due to the higher charge carrier concentration. Furthermore both the charge carrier and lattice contributions to the thermal conductivity are increased in the electrically conductive ordered-vacancy phases, with the result that the thermoelectric performance is significantly degraded. These results illustrate the competition between the effects of charge transfer from guest to host and the disorder generated when cobalt cations are incorporated in the inter-layer space.

Microwave-assisted synthesis, microstructure, and physical properties of rare-earth chromites.

The full rare-earth (RE) chromites series (RE)CrO(3) with an orthorhombic distorted (Pnma) perovskite structure and the isostructural compound YCrO(3) can be synthesized through a simple microwave-assisted technique, yielding high-quality materials. Magnetization measurements evidence that the Néel temperature for antiferromagnetic Cr(3+)-Cr(3+) ordering strongly depends on the RE(3+) ionic radius (IOR), and a rich variety of different magnetic spin interactions exists. Dielectric spectroscopy on sintered pellets indicates electronic inhomogeneity in all samples as manifested by the presence of at least two dielectric relaxation processes associated with grain boundary and grain interior bulk contributions. X-ray diffraction, Raman spectroscopy, and temperature-dependent dielectric permittivity data do not indicate potential noncentrosymmetry in the crystal or concomitant ferroelectricity. Strong correlations between the magnetic and dielectric properties were not encountered, and microwave-synthesized (RE)CrO(3) may not be classified as magnetoelectric or multiferroic materials.