ABSTRACT
Scientists are drawn to the new green composites because they may demonstrate qualities that are comparable to those of composites made of synthetic fibers due to concerns about environmental contamination. In this work, the potential for using the produced green composite in different buckling load-bearing structural applications is explored. The work on composite buckling characteristics is vital because one needs to know the composite's structural stability since buckling leads to structural instability. The buckling properties of composite specimens with epoxy as the matrix and chemically treated cellulose microfibrils as reinforcements are examined numerically in this study when exposed to axial compressive stress. The numerical model is first created based on the finite element method model. Its validity is checked using ANSYS software by contrasting the critical buckling loads determined through research for three samples. The numerical findings acquired using the finite element method are then contrasted with those produced using the regression equation derived from the ANOVA. The utilization of the created green composite in different buckling load-bearing structural applications is investigated in this study. As a result of the green composite's unaltered buckling properties compared to synthetic composites, it has the potential to replace numerous synthetic composites, improving environmental sustainability.
ABSTRACT
Due to the growing environmental awareness, the development of sustainable green composites is in high demand in composite industries, mainly in the automotive, aircraft, construction and marine applications. This work was an attempt to experimentally and numerically investigate the dynamic characteristics of Woven Flax/Bio epoxy laminated composite plates. In addition, the optimisation study on the dynamic behaviours of the Woven Flax/Bio epoxy composite plate is carried out using the response surface methodology (RSM) by consideration of the various parameters like ply orientation, boundary condition and aspect ratio. The elastic constants of the Woven Flax/Bio epoxy composite lamina needed for the numerical simulation are determined experimentally using two methods, i.e., the usual mechanical tests as well as through the impulse excitation of vibration-based approach and made a comparison between them. The numerical analysis on the free vibration characteristics of the composite was carried out using ANSYS, a finite element analysis (FEA) software. The confirmation of the FE model was accomplished by comparing the numerical results with its experimental counterpart. Finally, a comparison was made between the results obtained through the regression equation and finite element analysis.
