ABSTRACT
Increased usage of selective laser sintering (SLS) for the production of end-use functional components has generated a requirement of developing new materials and process improvements to improve the applicability of this technique. This article discusses a novel process wherein carbon black was applied to the surface of TPU powder to reduce the laser reflectivity during the SLS process. The printing was carried out with a preheating temperature of 75 °C, laser energy density of 0.028 J/mm2, incorporating a 0.4 wt % addition of carbon black to the TPU powder, and controlling the powder layer thickness at 125 µm. The mixed powder, after printing, shows a reflectivity of 13.81%, accompanied by the highest average density of 1.09 g/cm3, hardness of 78 A, tensile strength of 7.9 MPa, and elongation at break was 364.9%. Compared to commercial TPU powder, which lacks the carbon black coating, the reflectance decreased by 1.78%, mechanical properties improved by 33.9%, and there was a notable reduction in the porosity of the sintered product.
ABSTRACT
This study proposes an innovative design solution based on the design for additive manufacturing (DfAM) and post-process for manufacturing industrial-grade products by reducing additive manufacturing (AM) time and improving production agility. The design of the supportless open cell Sea Urchin lattice structure is analyzed using DfAM for material extrusion (MEX) process to print support free in any direction. The open cell is converted into a global closed cell to entrap secondary foam material. The lattice structure is 3D printed with Polyethylene terephthalate glycol (PETG) material and is filled with foam using the Hybrid MEX process. Foam-filling improves the lattice structure's energy absorption and crash force efficiency when tested at different strain rates. An industrial case study demonstrates the importance and application of this lightweight and tough design to meet the challenging current and future mass customization market. A consumer-based industrial scenario is chosen wherein an innovative 3D-printed universal puck accommodates different shapes of products across the supply line. The pucks are prone to collisions on the supply line, generating shock loads and hazardous noise. The results show that support-free global closed-cell lattice structures filled with foam improve energy absorption at a high strain rate and enhance the functional requirement of noise reduction during the collision.