Direct Production of Sustainable Aviation Fuel by Deoxygenation and Isomerization of Triglycerides over Bifunctional Ir-ReOx/SAPO-11 Catalyst.

Catalytic thermochemical conversion offers a sustainable method to upgrade oil-based feedstocks into highly valuable biofuel, aligning with the modern biorefinery concept. Herein, a series of IrRe/SAPO-11 catalysts with different Ir to Re molar ratios compared to reference Ir/SAPO-11 and Re/SAPO-11 catalysts was prepared using a wetness impregnation method. These catalysts were used for the direct production of sustainable aviation fuels (SAFs) via efficient hydrodeoxygenation and hydroisomerization of triglycerides. The catalyst screening confirmed that the optimum IrRe/SAPO-11 catalyst, with an equivalent Ir to Re molar ratio, exhibited the highest hydrodeoxygenation activity under milder operation conditions than the conditions used in previous studies. Increasing the reaction temperature up to 330 °C enhanced the formation of iso-alkanes in the liquid product, achieving a freezing point of -31.4 °C without additional cold flow improvers. Furthermore, a long-term stability experiment demonstrated that the developed Ir-Re system exhibited exceptional performance over 150 h. This excellent catalytic activity and stability of the bifunctional IrRe/SAPO-11 catalyst was owing to its suitable interface between metallic and oxide sites, mixed mesoporous structures, reduced catalyst size, and increased Lewis acid ratio, as confirmed by our comprehensive characterizations.

Novel iron sand-derived α-Fe2O3/CaO2 bifunctional catalyst for waste cooking oil-based biodiesel production.

The main aim of this work was to develop a heterogeneous Fe2O3/CaO2 bifunctional catalyst prepared from iron sand and 3 different CaO2 sources (CaCO3, Ca (OH)2, and limestone) using wet impregnation and calcination methods for biodiesel production. The effects of different CaO2 sources and Fe/Ca ratio in the catalyst were investigated to provide insight into the catalyst character and biodiesel yield. X-ray diffraction, X-ray fluorescence, and scanning electron microscopy analyses were used to characterize the catalyst. CaCO3 was concluded as the best CaO2 source, while the best Fe/Ca configuration was found to be 1:4, giving the highest biodiesel yield (97.0401%) with no diglycerides. Greater addition of Fe loading would result in an amorphous structure, and all catalysts were relatively crystalline. Fe was concluded to favor the esterification reaction and biodiesel formation, while CaO2 was seen to favor the transesterification reaction and fatty acid methyl ester (FAME) formation. The catalyst mechanism was also established in this study, where esterification of free fatty acid (FFA) and glycerol took place on the acid site to produce diglyceride and transesterification of triglyceride by methanol occurred on the basic site.

Geothermal solid waste derived Ni/Zeolite catalyst for waste cooking oil processing.

The main aim of this work was to develop a sustainable Ni/Zeolite catalyst derived from geothermal solid waste for waste cooking oil processing. The effects of catalyst concentration and operation temperature on the transesterification process for biodiesel production which used waste cooking oil as feedstock were investigated to determine the optimum biodiesel process condition. Results have shown the synthesized Ni/Zeolite catalyst was granular in shape and crystalline with increased surface area and pore volume, 80.661 m2 g-1, and 0.123 cc g-1 respectively. Meanwhile, the highest biodiesel yield obtained was 89.4 % at 3 % w/w Ni/Zeolite catalyst addition and 60 °C operating temperature. The reusability of the synthesized catalyst was also investigated, with results showing the biodiesel yield decreasing to 73.3 % after three cycles.

Preparation of KI/Hydroxyapatite Catalyst from Phosphate Rocks and Its Application for Improvement of Biodiesel Production.

The main aim of this work was to investigate the suitability of a KI/KIO3 impregnated hydroxyapatite (HAP) catalyst derived from natural phosphate rocks for biodiesel production. This study evaluated the effect of impregnation concentrations (1-6% w/w) on the catalyst performance in biodiesel production. The biodiesel was produced from waste cooking oil (WCO) under simultaneous esterification-transesterification reactions at 60 °C for 6 h. The results showed that the biodiesel yield increased by increasing impregnation concentration and the maximum yield (91.787%) was achieved at an impregnation concentration of 5% w/w. The KI/HAP catalyst showed better performance (91.78% biodiesel yield, 59.1% FAME yield and surface area of 13.513 m2/g) as compared to the KIO3/HAP catalyst (90.07% biodiesel yield, 55.0% FAME yield and surface area of 10.651 m2/g).

Geothermal industry waste-derived catalyst for enhanced biohydrogen production.

The main aim of this work was to develop sustainable catalyst from geothermal waste by hydrothermal process for enhanced biohydrogen production. The effects of Si/Al ratio and pH neutralization on the catalyst were also investigated to provide further insight into the hydrogen production capability. Results have shown with increasing Si/Al ratio, a lower amount of catalyst was synthesized and smaller particle size was obtained. pH neutralization treatment resulted in higher conversion compared to non-neutralized ones. Meanwhile, the highest conversion of biohydrogen from ethanol through steam reforming process (95.19%) was obtained from catalyst with pH neutralization treatment and Si/Al ratio of 10. The catalyst developed in this study was concluded to be suitable for framework/supporting catalyst due to relatively low selectivity.