Temperature stability of oxytocin ampoules labelled for storage at 2°C-8°C and below 25°C: an observational assessment under controlled accelerated and temperature cycling conditions.

INTRODUCTION: Oxytocin, administered via injection, is recommended by WHO for the prevention and treatment of postpartum haemorrhage. However, the susceptibility of oxytocin injection to thermal degradation has led WHO and UNICEF to recommend cold-chain storage of all oxytocin products. Nevertheless, some oxytocin products supplied to the global market are labelled for storage at ≤25°C, often with a shorter shelf-life relative to products labelled for refrigeration. Differences in labelled storage requirements can lead to uncertainties among stakeholders around the relative stability of oxytocin products and specifically whether ≤25°C products are more resistant to degradation. Such confusion can potentially influence policies associated with procurement, distribution, storage and the use of oxytocin in resource-poor settings. OBJECTIVES: To compare the stability of oxytocin injection ampoules formulated for storage at ≤25°C with those labelled for refrigerated storage. DESIGN: Accelerated and temperature cycling stability studies were performed with oxytocin ampoules procured by the United Nations Population Fund (UNFPA) from four manufacturers. METHOD: Using oxytocin ampoules procured by UNFPA, accelerated stability (up to 120 days) and temperature cycling (up to 135 days between elevated and refrigerated temperatures) studies were performed at 30°C, 40°C and 50°C. Oxytocin content was quantified using a validated HPLC-UV method. RESULTS: All ampoules evaluated exhibited similar stability profiles under accelerated degradation conditions with the exception of one product formulated for ≤25°C storage, where the rate of degradation increased at 50°C relative to other formulations. Similar degradation trends at elevated temperatures were observed during temperature cycling, while no significant degradation was observed during refrigerated periods of the study. CONCLUSION: Oxytocin ampoules formulated for non-refrigerated storage demonstrated comparable stability to those labelled for refrigerated storage and should not be interpreted by stakeholders as offering a more stable alternative. Furthermore, these products should not be procured for use in territories with high ambient temperatures, where all oxytocin injection products should be supplied and stored under refrigerated conditions.

Precise control of drug loading and release of an NSAID-polymer conjugate for long term osteoarthritis intra-articular drug delivery.

A facile synthesis method of polymer diclofenac conjugates (PDCs) based on biocompatible polyurethane chemistry that provides a high drug loading and offers a high degree of control over diclofenac (DCF) release kinetics is described. DCF incorporating monomer was reacted with ethyl-l-lysine diisocyanate (ELDI) and different amounts of polyethylene glycol (PEG) in a one-step synthesis to yield polymers with pendent diclofenac distributed along the backbone. By adjusting the co-monomers feed ratio, the drug loading could be tailored accordingly to give DCF loading of up to 38 w/w%. The release rate could also be controlled easily by changing the amount of PEG in the backbone. Above 10 w/w% of PEG, the in vitro DCF release studies in physiological conditions showed an apparent zero-order profile without an initial burst effect for up to 120 days. The PDCs described may be suitable for long-term intra-articular (IA) delivery for the treatment of osteoarthritis (OA).

The Hydrolysis of Diclofenac Esters: Synthetic Prodrug Building Blocks for Biodegradable Drug-Polymer Conjugates.

Degradation reactions on diclofenac-monoglycerides (3a,b), diclofenac-(p-hydroxybenzoate)-2-monoglyceride (3c), diclofenac (1), and diclofenac lactam (4) were performed at 37 °C in isotonic buffer solutions (apparent pH range 1-8) containing varying concentrations of acetonitrile (ACN). The concentration remaining of each analyte was measured versus time. Diclofenac-monoglycerides and diclofenac-(p-hydroxybenzoate)-2-monoglyceride (3c) were both found to undergo facile and complete hydrolysis in pH 7.4 isotonic phosphate buffer/10% ACN. Under mildly acidic, neutral or alkaline conditions, diclofenac-(p-hydroxybenzoate)-2-monoglyceride (3c) had the fastest hydrolysis rate (t1/2 = 3.23 h at pH 7.4), with simultaneous formation of diclofenac lactam (4) and diclofenac (1). Diclofenac-monoglycerides (3a,b) hydrolyzed more slowly under the same conditions, to again yield both diclofenac (1) and diclofenac lactam (4). There was also transesterification of diclofenac-2-monoglyceride (3b) to its regioisomer, diclofenac-1-monoglyceride (3a) across the pH range. Diclofenac was shown to be stable in neutral or alkaline conditions but cyclized to form the lactam (4) in acidic conditions. Conversely, the lactam (4) was stable under acidic conditions but was converted to an unknown species under alkaline or neutral conditions.

The physicochemical properties of geraniin, a potential antihyperglycemic agent.

CONTEXT: Natural products play a vital role in the discovery of leads for novel pharmacologically active drugs. Geraniin (GE) was identified as the major compound in the rind of Nephelium lappaceum L. (Sapindaceae), while ellagic and gallic acids have been shown to be its main metabolites. GE and its metabolites possess a range of bioactive properties including being an anti-infective, anticarcinogenic, antihyperglycemic, and antihypertensive. OBJECTIVE: GE and its metabolites were investigated to establish its gastrointestinal absorption and physicochemical properties. MATERIALS AND METHODS: GE was purified from N. lappaceum rind extract using reverse-phase C18 column chromatography. Lipophilicity (log P) was determined using the 1-octanol/water shake-flask method. Equilibrium solubility of GE and its metabolites (20 mg) was determined in water and four biorelevant media: simulated gastric, simulated intestinal, fasted state-simulated intestinal, and fed state-simulated intestinal after 72 h. RESULTS AND DISCUSSION: The purification yield was 10.8%; where a 97-99% pure GE was obtained. Log P values for GE, ellagic, and gallic acids were established as -0.73 ± 0.17, 0.11 ± 0.06, and 0.71 ± 0.21, respectively, establishing them as polar compounds. All three compounds were found to exhibit poor solubility in gastric (0.61-8.10 mg/mL) but good solubility in intestinal fluids (3.59-14.32 mg/mL). CONCLUSION: The above results indicate that the compounds have limited gastrointestinal absorption due to its polarities. To consider these compounds as oral drug candidates, formulation strategies are being developed.

Interaction of model aryl- and alkyl-boronic acids and 1,2-diols in aqueous solution.

The goal of this work was to quantitate ester formation between alkyl and aryl boronic acids and vicinal-diols or 1,2-diols in aqueous solution. As used here, 1,2-diols includes polyols with one or more 1,2-diol pairs. Multiple techniques were used including apparent pKa shifts of the boronic acids using UV spectrophotometry (for aryl acids) and titration (for aryl and alkyl acids). Isothermal microcalorimetry was also used, with all reactions being enthalpically favored. For all the acids and 1,2-diols and the conditions studied, evidence only supported 1:1 ester formation. All the esters formed were found to be significantly more acidic, as Lewis acids, by 3-3.5 pKa units than the corresponding nonesterified boronic acid. The equilibrium constants for ester formation increased with increasing number of 1,2-diol pairs but stereochemistry may also play a role as sorbitol with five possible 1,2-diol pairs and five isomers (taking into account the stereochemistry of the alcohol groups) was twice as efficient at ester formation compared with mannitol, also with five possible 1,2-diol pairs but only three isomers. Alkyl boronic acids formed esters to a greater extent than aryl acids. Although some quantitative differences were seen between the various techniques used, rank ordering of the structure/reactivity was consistent. Formulation implications of ester formation between boronic acids and 1,2-diols are discussed.

Evaluation of the impact of sulfobutylether7 -ß-cyclodextrin on the liquid chromatography-mass spectrometry analysis of biological samples arising from in vivo pharmacokinetic studies.

The utility of cyclodextrin (CD) complexation in improving apparent solubility of drugs in parenteral formulations is well established. Administration of these formulations delivers CD directly into the systemic circulation, and it may be necessary to demonstrate unaltered in vivo disposition of a drug coadministered with a CD. Crucial to the undertaking of such a study is the need for bioanalytical assays in which CD presence does not impact drug quantitation. This is of particular importance when assessing the potential impact of in vivo CD complexation on the urinary excretion of a drug, as CDs are predominantly eliminated via glomerular filtration, and hence are present in urine at significantly higher concentration than would be present in blood and plasma. Of 23 publications (in the past 30 years) describing preclinical and clinical assessment of drug pharmacokinetics after i.v. administration of CD-enabled formulations, only two reports clearly stated that the presence of CD had no impact on assay performance. In this work, we describe the simple process involved in (1) predicting the maximum concentrations of a modified CD, sulfobutylether7 -ß-CD (SBE7 -ß-CD), in plasma and urine samples from preclinical studies, and (2) evaluating the impact of SBE7 -ß-CD on the quantitative liquid chromatography-mass spectrometry analysis of rimantadine.

The effect of intravenous sulfobutylether7 -ß-cyclodextrin on the pharmacokinetics of a series of adamantane-containing compounds.

Intravenously administered (i.v.) drug-cyclodextrin (CD) inclusion complexes are generally expected to dissociate rapidly and completely, such that the i.v. pharmacokinetic profile of a drug is unchanged in the presence of CD. The altered pharmacokinetics of a synthetic ozonide in rats has been attributed to an unusually high-binding affinity (2.3 × 10(6) M(-1) ) between the drug and sulfobutylether7 -ß-cyclodextrin (SBE7 -ß-CD) with further studies suggesting a significant binding contribution from the adamantane ring. This work investigated the binding affinity of three adamantane derivatives [amantadine (AMA), memantine (MEM) and rimantadine (RIM)] to SBE7 -ß-CD and the impact of complexation on their i.v. pharmacokinetics. In vitro studies defined the plasma protein binding, as well as the impact of SBE7 -ß-CD on erythrocyte partitioning of each compound. SBE7 -ß-CD binding constants for the compounds were within the typical range for drug-like molecules (10(2) -10(4) M(-1) ). The pharmacokinetics of AMA and MEM were unchanged; however, significant alteration of RIM plasma and urinary pharmacokinetics was observed when formulated with CD. In vitro studies suggested two factors contributing to the altered pharmacokinetics: (1) low plasma protein binding of RIM, and (2) decreased erythrocyte partitioning in the presence of high SBE7 -ß-CD concentrations. This work demonstrated the potential for typical drug-cyclodextrin interactions to alter drug plasma pharmacokinetics.

Pulmonary delivery of an ultra-fine oxytocin dry powder formulation: potential for treatment of postpartum haemorrhage in developing countries.

Oxytocin is recommended by the World Health Organisation as the most effective uterotonic for the prevention and treatment of postpartum haemorrhage. The requirement for parenteral administration by trained healthcare providers and the need for the drug solution to be maintained under cold-chain storage limit the use of oxytocin in the developing world. In this study, a spray-dried ultrafine formulation of oxytocin was developed with an optimal particle size diameter (1-5 µm) to facilitate aerosolised delivery via the lungs. A powder formulation of oxytocin, using mannitol, glycine and leucine as carriers, was prepared with a volume-based median particle diameter of 1.9 µm. Oxytocin content in the formulation was assayed using high-performance liquid chromatography-mass spectroscopy and was found to be unchanged after spray-drying. Ex vivo contractility studies utilising human and ovine uterine tissue indicated no difference in the bioactivity of oxytocin before and after spray-drying. Uterine electromyographic (EMG) activity in postpartum ewes following pulmonary (in vivo) administration of oxytocin closely mimicked that observed immediately postpartum (0-12 h following normal vaginal delivery of the lamb). In comparison to the intramuscular injection, pulmonary administration of an oxytocin dry powder formulation to postpartum ewes resulted in generally similar EMG responses, however a more rapid onset of uterine EMG activity was observed following pulmonary administration (129 ± 18 s) than intramuscular injection (275 ± 22 s). This is the first study to demonstrate the potential for oxytocin to elicit uterine activity after systemic absorption as an aerosolised powder from the lungs. Aerosolised oxytocin has the potential to provide a stable and easy to administer delivery system for effective prevention and treatment of postpartum haemorrhage in resource-poor settings in the developing world.

A chemogenomic analysis of ionization constants--implications for drug discovery.

Chemogenomics methods seek to characterize the interaction between drugs and biological systems and are an important guide for the selection of screening compounds. The acid/base character of drugs has a profound influence on their affinity for the receptor, on their absorption, distribution, metabolism, excretion and toxicity (ADMET) profile and the way the drug can be formulated. In particular, the charge state of a molecule greatly influences its lipophilicity and biopharmaceutical characteristics. This study investigates the acid/base profile of human small-molecule drugs, chemogenomics datasets and screening compounds including a natural products set. We estimate the acid-ionization constant (pK(a)) values of these compounds and determine the identity of the ionizable functional groups in each set. We find substantial differences in acid/base profiles of the chemogenomic classes. In many cases, these differences can be linked to the nature of the target binding site and the corresponding functional groups needed for recognition of the ligand. Clear differences are also observed between the acid/base characteristics of drugs and screening compounds. For example, the proportion of drugs containing a carboxylic acid was 20 %, in stark contrast to a value of 2.4 % for the screening set sample. The proportion of aliphatic amines was 27 % for drugs and only 3.4 % for screening compounds. This suggests that there is a mismatch between commercially available screening compounds and the compounds that are likely to interact with a given chemogenomic target family. Our analysis provides a guide for the selection of screening compounds to better target specific chemogenomic families with regard to the overall balance of acids, bases and pK(a) distributions.

The significance of acid/base properties in drug discovery.

While drug discovery scientists take heed of various guidelines concerning drug-like character, the influence of acid/base properties often remains under-scrutinised. Ionisation constants (pK(a) values) are fundamental to the variability of the biopharmaceutical characteristics of drugs and to underlying parameters such as logD and solubility. pK(a) values affect physicochemical properties such as aqueous solubility, which in turn influences drug formulation approaches. More importantly, absorption, distribution, metabolism, excretion and toxicity (ADMET) are profoundly affected by the charge state of compounds under varying pH conditions. Consideration of pK(a) values in conjunction with other molecular properties is of great significance and has the potential to be used to further improve the efficiency of drug discovery. Given the recent low annual output of new drugs from pharmaceutical companies, this review will provide a timely reminder of an important molecular property that influences clinical success.

The Acid/Base Profile of the Human Metabolome and Natural Products.

Human small molecule metabolites (the human metabolome) are a set of compounds that interact with at least one macromolecule in the biosphere. This study investigates the acid/base profile of the human metabolome, natural products and drugs, together with an analysis of their physicochemical properties. Ionisation constants (pKa values) are estimated for each compound and the identity of the ionisable functional groups in each set is determined. The acid/base and physicochemical property profile of the lipid component of the metabolome differed considerably to the other datasets. In contrast, the acid/base properties of non-lipid metabolites were found to be similar to both drugs and natural products. While the non-lipid metabolites have lower average ClogP values and more hydrogen bond donors than the other datasets, the distribution of physicochemical property values overlapped considerably with the drug dataset. Considering also that the non-lipid metabolites are of biochemical interest, their characteristics have great potential to influence the selection of screening compounds for drug discovery.

Interaction of colistin and colistin methanesulfonate with liposomes: colloidal aspects and implications for formulation.

Interaction of colistin and colistin methanesulfonate (CMS) with liposomes has been studied with the view to understanding the limitations to the use of liposomes as a more effective delivery system for pulmonary inhalation of this important class of antibiotic. Thus, in this study, liposomes containing colistin or CMS were prepared and characterized with respect to colloidal behavior and drug encapsulation and release. Association of anionic CMS with liposomes induced negative charge on the particles. However, degradation of the CMS to form cationic colistin over time was directly correlated with charge reversal and particle aggregation. The rate of degradation of CMS was significantly more rapid when associated with the liposome bilayer than when compared with the same concentration in aqueous solution. Colistin liposomes carried positive charge and were stable. Encapsulation efficiency for colistin was approximately 50%, decreasing with increasing concentration of colistin. Colistin was rapidly released from liposomes on dilution. Although the studies indicate limited utility of colistin or CMS liposomes for long duration controlled-release applications, colistin liposomes were highly stable and may present a potential opportunity for coformulation of colistin with a second antibiotic to colocalize the two drugs after pulmonary delivery.

Stability and sterility of diluted enoxaparin under three different storage conditions.

AIM: This study assessed whether enoxaparin sodium diluted to a concentration of 20 mg/mL for clinical use with 0.9% sodium chloride remained stable and sterile for up to 43 days under three different storage conditions. METHODS: Enoxaparin dilutions in polypropylene syringes were stored under three different controlled conditions of temperature and light: (i) room temperature (22-26°C) under natural light; (ii) room temperature (22-26°C) in the dark; and (iii) controlled refrigeration (2-8°C) in the dark. A weekly assay of anti-Xa and anti-IIa activity was undertaken to determine if the diluted enoxaparin preparations retained anticoagulant activity, thus remaining suitable for clinical application. RESULTS: Our findings indicate that diluted enoxaparin, when stored under the tested varied conditions of light and temperature, retained greater than or equal to 90% of baseline anticoagulant activity for anti-Xa and anti-IIa effect for up to 43 days. CONCLUSIONS: The study results are significant for families, in that they suggest that at least a month's supply of enoxaparin could be dispensed at a time, reducing the frequency of patients/families returning for supply and providing a more convenient service for paediatric patients.

Self-assembly behavior of colistin and its prodrug colistin methanesulfonate: implications for solution stability and solubilization.

Colistin is an amphiphilic antibiotic that has re-emerged into clinical use due to the increasing prevalence of difficult-to-treat Gram-negative infections. The existence of self-assembling colloids in solutions of colistin and its derivative prodrug, colistin methanesulfonate (CMS), was investigated. Colistin and CMS reduced the air-water interfacial tension, and dynamic light scattering (DLS) studies showed the existence of 2.07 +/- 0.3 nm aggregates above 1.5 mM for colistin and of 1.98 +/- 0.36 nm aggregates for CMS above 3.5 mM (mean +/- SD). Above the respective critical micelle concentrations (CMC) the solubility of azithromycin, a hydrophobic antibiotic, increased approximately linearly with increasing surfactant concentration (5:1 mol ratio colistin:azithromycin), suggestive of hydrophobic domains within the micellar cores. Rapid conversion of CMS to colistin occurred below the CMC (60% over 48 h), while conversion above the CMC was less than 1%. The formation of colistin and CMS micelles demonstrated in this study is the proposed mechanism for solubilization of azithromycin and the concentration-dependent stability of CMS.

Impact of chlorpromazine self-association on its apparent binding constants with cyclodextrins: Effect of SBE(7)-beta-CD on the disposition of chlorpromazine in the rat.

Chlorpromazine is an antipsychotic agent with poor aqueous solubility. Complexation with SBE(7)-beta-CD can aid intravenous delivery through increasing the apparent solubility of chlorpromazine. However, chlorpromazine has also been known to self-associate. This self-association can influence its capacity to interact with other chemical species, such as cyclodextrins. This study aimed to characterise the self-association and cyclodextrin binding properties of chlorpromazine, and the effect on pharmacokinetic parameters in rats when dosed with a SBE(7)-beta-CD containing formulation. Pharmacokinetic studies of chlorpromazine in the presence and absence of SBE(7)-beta-CD were undertaken in rats. The binding constant of SBE(7)-beta-CD and chlorpromazine was studied relative to chlorpromazine concentration via fluorescence. The self-association of chlorpromazine was studied by fluorescence and UV-visible spectrophotometry. Urinary excretion of intact chlorpromazine increased in the presence of SBE(7)-beta-CD. The SBE(7)-beta-CD binding constant of chlorpromazine is highly concentration dependent and the variation can be attributed to the self-association of chlorpromazine. The apparent binding constant of chlorpromazine is highest at pharmacologically relevant concentrations, providing an explanation for the significant increase in renal chlorpromazine excretion observed in rats.

Stability of peroxide antimalarials in the presence of human hemoglobin.

Peroxide antimalarials, including artemisinin, are important for the treatment of multidrug-resistant malaria. These peroxides are known to react with iron or heme to produce reactive intermediates that are thought to be responsible for their antimalarial activities. This study investigated the potential interaction of selected peroxide antimalarials with oxyhemoglobin, the most abundant form of iron in the human body. The observed stability of artemisinin derivatives and 1,2,4-trioxolanes in the presence of oxyhemoglobin was in contrast to previous reports in the literature. Spectroscopic analysis of hemoglobin found it to be unstable under the conditions used for previous studies, and it appears likely that the artemisinin reactivity reported in these studies may be attributed to free heme released by protein denaturation. The stability of peroxide antimalarials with intact oxyhemoglobin, and reactivity with free heme, may explain the selective toxicity of these antimalarials toward infected, but not healthy, erythrocytes.

A protocol for the combined sub-fractionation and delipidation of lipid binding proteins using hydrophobic interaction chromatography.

Cellular lipids frequently co-purify with lipid binding proteins isolated from tissue extracts or heterologous host systems and as such hinder in vitro ligand binding approaches for which the apo-protein is a prerequisite. Here we present a technique for the complete removal of unesterified fatty acids, phospholipids, steroids and other lipophilic ligands bound to soluble proteins, without protein denaturation. Peroxisome proliferator activated receptor gamma ligand binding domain and intracellular fatty acid binding proteins were expressed in an Escherichia coli host and completely delipidated by hydrophobic interaction chromatography using phenyl sepharose. The delipidation procedure operates at room temperature with complete removal of bound lipids in a single step, as ascertained by mass spectrometry analysis of organic solvent extracts from purified protein samples. The speed and capacity of this method makes it amenable to scale-up and high-throughput applications. The method can also easily be adapted for other lipid binding proteins that require delipidation under native conditions.

Preparation and in vitro evaluation of novel lipopeptide transfection agents for efficient gene delivery.

Gene therapy by delivery of nonviral expression vectors is highly desirable, due to their safety, stability, and suitability for production as bulk pharmaceuticals. However, low transfection efficiency remains a limiting factor in application on nonviral gene delivery. Despite recent advances in the field, there are still major obstacles to overcome. In an attempt to construct more efficient nonviral gene delivery vectors, we have designed a series of novel lipopeptide transfection agents, consisting of an alkyl chain, one cysteine, 1 to 4 histidine and 1 to 3 lysine residues. The lipopeptides were designed to facilitate dimerization (by way of the cysteine residues), DNA binding at neutral pH (making use of charged lysine residues), and endosomal escape (by way of weakly basic histidine residues). DNA/lipopeptide complexes were evaluated for their biophysical properties and transfection efficiencies. The number and identity of amino acids incorporated in the lipopeptide construct affected their DNA/lipopeptide complex forming capacity. As the number of lysine residues in the lipopeptide increased, the DNA complexes formed became more stable, had higher zeta potential (particle surface charge), and produced smaller mean particle sizes (typically 110 nm at a charge ratio of 5.0 and 240 nm at a charge ratio of 1.0). The effect of inclusion of histidines in the lipopeptide moiety had the opposite effect on complex formation to lysine, but was necessary for high transfection efficiency. In vitro transfection studies in COS-7 cells revealed that the efficiency of gene delivery of the luciferase encoding plasmid, pCMV-Luc, mediated by all the lipopeptides, was much higher than poly(L-lysine) (PLL), which has no endosomal escape system, and in two cases was slightly higher than that of branched polyethylenimine (PEI). Lipopeptides with at least two lysine residues and at least one histidine residue produced spontaneous transfection complexes with plasmid DNA, indicating that endosomal escape was achieved by incorporation of histidine residues. These low molecular weight peptides can be readily synthesized and purified and offer new insights into the mechanism of action of transfection complexes.

Relationship between antimalarial activity and heme alkylation for spiro- and dispiro-1,2,4-trioxolane antimalarials.

The reaction of spiro- and dispiro-1,2,4-trioxolane antimalarials with heme has been investigated to provide further insight into the mechanism of action for this important class of antimalarials. A series of trioxolanes with various antimalarial potencies was found to be unreactive in the presence of Fe(III) hemin, but all were rapidly degraded by reduced Fe(II) heme. The major reaction product from the heme-mediated degradation of biologically active trioxolanes was an alkylated heme adduct resulting from addition of a radical intermediate. Under standardized reaction conditions, a correlation (R2 = 0.88) was found between the extent of heme alkylation and in vitro antimalarial activity, suggesting that heme alkylation may be related to the mechanism of action for these trioxolanes. Significantly less heme alkylation was observed for the clinically utilized artemisinin derivatives compared to the equipotent trioxolanes included in this study.