Comparative study of potential whiplash injuries for different occupant seated positions during rear end accidents.

PURPOSE: Whiplash injuries to the cervical spine represent a considerable economic burden on society with medical conditions, in some cases persisting for more than a year. Numerous studies of whiplash injuries have been made for occupant normal seated position, leaving the analysis of neck injuries for out-of-normal positions not well documented. For that purpose, a detailed human cervical spine finite element model was developed. METHODS: The analysis was made for four most common occupant seated positions, such as: Normal Position with the torso against the seat back and the head looking straight ahead, Torso Lean forward position with the torso away from the seat back for approximately 10°, Head Flexed position with the head flexed forward approximately 20° from the normal position and Head-Flexed with Torso Lean forward position with the head flexed forward approximately 20° and torso 10° from the normal position. RESULTS: The comparative study included the analysis of capsular ligament deformation and the level of S-curvature of the cervical spine. The model developed predicted that Head Flexed seated position and Head-Flexed with Torso Lean forward seated position are most threatening for upper and lower cervical spine capsular ligament, respectively. As for the level of S-curvature, the model predicted that Head-Flexed with Torso Lean forward seated position would be most prone to neck injuries associated with it. CONCLUSIONS: This study demonstrated that the occupant seated position has a significant influence on potential whiplash injuries.

Loading rate effect on mechanical properties of cervical spine ligaments.

Mechanical properties of cervical spine ligaments are of great importance for an accurate finite element model when analyzing the injury mechanism. However, there is still little experimental data in literature regarding fresh human cervical spine ligaments under physiological conditions. The focus of the present study is placed on three cervical spine ligaments that stabilize the spine and protect the spinal cord: the anterior longitudinal ligament, the posterior longitudinal ligament and the ligamentum flavum. The ligaments were tested within 24-48 hours after death, under two different loading rates. An increase trend in failure load, failure stress, stiffness and modulus was observed, but proved not to be significant for all ligament types. The loading rate had the highest impact on failure forces for all three ligaments (a 39.1% average increase was found). The observed increase trend, compared to the existing increase trends reported in literature, indicates the importance of carefully applying the existing experimental data, especially when creating scaling factors. A better understanding of the loading rate effect on ligaments properties would enable better case-specific human modelling.

Failure properties and damage of cervical spine ligaments, experiments and modeling.

Cervical spine ligaments have an important role in providing spinal cord stability and restricting excessive movements. Therefore, it is of great importance to study the mechanical properties and model the response of these ligaments. The aim of this study is to characterize the aging effects on the failure properties and model the damage of three cervical spine ligaments: the anterior and the posterior longitudinal ligament and the ligamentum flavum. A total of 46 samples of human cadaveric ligaments removed within 24-48 h after death have been tested. Uniaxial tension tests along the fiber direction were performed in physiological conditions. The results showed that aging decreased the failure properties of all three ligaments (failure load, failure elongation). Furthermore, the reported nonlinear response of cervical ligaments has been modeled with a combination of the previously reported hyperelastic and damage model. The model predicted a nonlinear response and damage region. The model fittings are in agreement with the experimental data and the quality of agreement is represented with the values of the coefficient of determination close to 1.

Comparative study of European tunnel emergency-stop-area-wall protection measures.

Due to the increasing number of traffic accidents involving the collisions of vehicles with the emergency-stop-area head walls in tunnels, a comparative numerical analysis in accordance with the EN 1317 standard has been performed in order to assess the quality of the available protective safety barriers. Based on the simulation results, the values of the relevant injury criteria - the acceleration severity index (ASI), the theoretical head impact velocity (THIV) and the post-impact head deceleration (PHD) - were computed for several collision scenarios involving two different passenger vehicles colliding with two different safety barriers in various ways. The results show that due to the geometrical restrictions in the tunnel's emergency stop area none of the barriers can provide total protection for the occupants of the vehicle in the event of a collision. The installation of a steel-sheet-tube crash cushion was, however, found to provide the best possible protection within the given limitations. The results of the analysis were the basis for selecting a safety-barrier design for existing tunnel installations and for the proposed changes in regulations governing the geometry of the tunnel's emergency stop area.

i3Drive, a 3D interactive driving simulator.

i3Drive, a wheeled-vehicle simulator, can accurately simulate vehicles of various configurations with up to eight wheels in real time on a desktop PC. It presents the vehicle dynamics as an interactive animation in a virtual 3D environment. The application is fully GUI-controlled, giving users an easy overview of the simulation parameters and letting them adjust those parameters interactively. It models all relevant vehicle systems, including the mechanical models of the suspension, power train, and braking and steering systems. The simulation results generally correspond well with actual measurements, making the system useful for studying vehicle performance in various driving scenarios. i3Drive is thus a worthy complement to other, more complex tools for vehicle-dynamics simulation and analysis.

Computer simulation of the accident with nine victims.

In the paper we wish to emphasise the significance of vehicle driving dynamics analysis in the collision phase and occupant load analysis by means of using a software environment. Thereby we also wish to present the results of the simulation of the course of a traffic accident with nine victims that arose from a collision between an Audi A6 passenger car and the VW Caravelle van. In treating the traffic accident the forensic expert was faced with the questions about what caused the injuries to the front passenger in the Audi A6 passenger car, about the way the two vehicles had collided, about their collision velocities, about the way the two vehicles were handled and about the causes that originated the traffic accident. The critical situation on the road was a consequence of the tiredness of the van driver, the inadequate use of the passive safety systems and overloading the van.