Amorphous Conjugated Polymers as Efficient Dual-Mode MALDI Matrices for Low-Molecular-Weight Analytes.

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) usually employs highly crystalline small-molecule matrices, and the analyte is interpreted as being co-crystallized with the matrix. We recently showed that semi-crystalline polymers are efficient matrices for the detection of low-molecular-weight compounds (LMWCs) in MALDI MS and MALDI MS Imaging, and are dual-mode, i. e., enabling both positive and negative modes. The matrix performances of two fluorene/napthalene diimide co-polymers P(TNDIT-Fl(C4 C2 )) and P(TNDIT-Fl(C10 C8 )) were investigated and compared. Both are fully amorphous according to XRD measurements, show high relative absorption values at the wavelength of common MALDI lasers (λNd:YAG =355 nm: C4 C2 =73 %; C10 C8 =67 %), and are solution processable. As matrices, they are dual-mode, and enable the detection of LMWCs while being mostly MALDI-silent. Compared with semicrystalline polymer matrices, the amorphous matrices give similar or better signal intensities, thus indicating that analyte inclusion takes place in the amorphous part of the polymer matrix.