Bisphenol S exposed changes in intestinal microflora and metabolomics of freshwater crayfish, Procambarus clarkii.

Bisphenol S (BPS), a typical endocrine-disrupting chemical (EDC), can cause hepatopancreas damage and intestinal flora disturbance. Comprehensive studies on the mechanisms of acute toxicity in crustaceans are lacking. In this study, 16S rRNA and liquid chromatography were used to investigate intestinal microbiota and metabolites of freshwater crayfish (Procambarus clarkii). In this study, freshwater crayfish were exposed to BPS (10 µg/L and 100 µg/L). The results showed a significant decrease in catalase (CAT) and superoxide dismutase (SOD) activities after exposure to BPS, which inhibited the Nrf2-Keap1 signaling pathway and induced oxidative stress toxicity in freshwater crayfish. In addition, BPS exposure induced the structural changes of intestinal microbial in the freshwater crayfish, showing different patterns of effects. The number of potentially pathogenic bacteria increased, such as Citrobacter, Hafnia-Obesumbacterium, and RsaHf231. A total of 128 different metabolites were analyzed by LC-MS/MS. The inositol and leukotriene (LT) contents in the hepatopancreas of freshwater crayfish were significantly decreased after 10 µg/L BPS exposure, which in turn led to the accumulation of lipids causing hepatopancreas damage. In conclusion, when the concentration of BPS in the water environment exceeded 10 µg/L, the freshwater crayfish intestinal microbiota was dysbiosis and the hepatopancreas metabolism was disturbed.

The effects of bisphenol S exposure on the growth, physiological and biochemical indices, and ecdysteroid receptor gene expression in red swamp crayfish, Procambarus clarkii.

The experiment was conducted to investigate the effects of Bisphenol S (BPS) on growth, physiological and biochemical indices, and the expression of ecdysteroid receptor (ECR) of the red swamp crayfish (Procambarus clarkii). The gene encoding ECR was isolated from red swamp crayfish by homologous cloning and rapid amplification of cDNA ends (RACE). The ECR transcripts were 1757 bp long and encoded proteins of 576 amino acids. The quantitative real-time PCR (qRT-PCR) analysis showed that the ECR gene was expressed in various tissues under normal conditions, and the highest level was observed in the ovary and the lowest level was observed in the muscle (P < 0.05). Then, the experiment was designed with four different BPS concentrations (0, 1, 10, and 100 µg/L), BPS exposure for 14 days, three parallel groups, and a total of 240 red swamp crayfish. At 100 µg/L BPS, the survival rate, weight gain rate, and relative length rate were decreased significantly (P < 0.05). Malonaldehyde (MDA) content reached the highest level at 100 µg/L BPS. When BPS concentration was higher than 10 µg/L, the activities of superoxide dismutase (SOD) and catalase (CAT) were significantly lower than those of the control group (P < 0.05). The expression levels of the ECR gene in ovary, intestinal, gill, and hepatopancreas tissues were significantly increased after BPS exposure (P < 0.05). The ECR gene expression in ovaries and Y-organs was significantly higher than other groups in 10 µg/L BPS (P < 0.05). The expressions of the tumor necrosis factor -α (TNF-α) and interleukin-6 (IL-6) genes in the hepatopancreas gradually increased, and the highest expression was observed exposed in 100 µg/L BPS (P < 0.05). This research will provide novel insights into the health risk assessment of BPS in aquatic organisms.

Protective effects of sulforaphane on inflammation, oxidative stress and intestinal dysbacteriosis induced by triphenyltin in Cyprinus carpio haematopterus.

The purpose of this experiment was to study the mitigation effect of sulforaphane (SFN) on fish toxicological damage caused by triphenyltin (TPT) pollution. A total of 320 healthy fish (56.9 ± 0.4g) were randomly placed into four groups, each with four duplicates. The control group was fed the basal diet, the TPT group was exposed to 10 ng/L TPT on the basis of the control group, the SFN group was fed a diet supplemented with 10 mg/kg SFN, the SFN + TPT group was exposed to 10 ng/L TPT on the basis of the SFN group. Each tank had 20 fish and the breeding lasted for 8 weeks. The present study found that the antioxidant enzyme activity in the TPT group was significantly lower than that of the control group (P < 0.05). In addition, compared with the control group, the mRNA expression of pro-inflammatory factors (IL-6, TNF-α) were significantly induced, and the anti-inflammatory factor genes (IL-10, TGF) were significantly inhibited (P < 0.05) in TPT group. SFN relieved the changes of inflammatory factors caused by TPT, ameliorated oxidative stress, improved antioxidant enzyme (include SOD, CAT, GSH, GPx) activities (P < 0.05). 16s RNA analysis indicated that exposure to TPT caused changes in intestinal microflora. The results of the study showed that after exposure to TPT, some beneficial genera of bacteria in the gut of Rhizobiaceae, Bdellovibrio and Candidatus Alysiosphaera were decreased. The bacteria associated with intestinal inflammation including Propionibacterium, Rubrobacter, Anaerorhabdus_furcosa_group, Rikenellaceae and Eubacterium_brachy were upregulated. However, the SFN treatment group significantly down-regulated the above five inflammation-related bacteria. The above results indicated that TPT caused oxidative stress and inflammation in fish intestines, changed the intestinal microflora, and dietary SFN could improve antioxidant status, regulate inflammation and intestinal health. Therefore, SFN is a promising diet additive for improving fish damage caused by TPT contamination.

Computational Study of Drop-on-Demand Coaxial Electrohydrodynamic Jet and Printing Microdroplets.

Currently, coaxial electrohydrodynamic jet (CE-Jet) printing is used as a promising technique for the alternative fabrication of drop-on-demand micro- and nanoscale structures without using a template. Therefore, this paper presents numerical simulation of the DoD CE-Jet process based on a phase field model. Titanium lead zirconate (PZT) and silicone oil were used to verify the numerical simulation and the experiments. The optimized working parameters (i.e., inner liquid flow velocity 150 m/s, pulse voltage 8.0 kV, external fluid velocity 250 m/s, print height 16 cm) were used to control the stability of the CE-Jet, avoiding the bulging effect during experimental study. Consequently, different sized microdroplets with a minimum diameter of ~5.5 µm were directly printed after the removal of the outer solution. The model is considered the easiest to implement and is powerful for the application of flexible printed electronics in advanced manufacturing technology.

High-performance flexible organic field effect transistors with print-based nanowires.

Polymer nanowire (NW) organic field-effect transistors (OFETs) integrated on highly aligned large-area flexible substrates are candidate structures for the development of high-performance flexible electronics. This work presents a universal technique, coaxial focused electrohydrodynamic jet (CFEJ) printing technology, to fabricate highly aligned 90-nm-diameter polymer arrays. This method allows for the preparation of uniformly shaped and precisely positioned nanowires directly on flexible substrates without transfer, thus ensuring their electrical properties. Using indacenodithiophene-co-benzothiadiazole (IDT-BT) and poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8-BT) as example materials, 5 cm2 arrays were prepared with only minute size variations, which is extremely difficult to do using previously reported methods. According to 2D-GIXRD analysis, the molecules inside the nanowires mainly adopted face-on π-stacking crystallite arrangements. This is quite different from the mixed arrangement of thin films. Nanowire-based OFETs exhibited a high average hole mobility of 1.1 cm2 V-1 s-1 and good device uniformity, indicating the applicability of CFEJ printing as a potential batch manufacturing and integration process for high-performance, scalable polymer nanowire-based OFET circuits. This technique can be used to fabricate various polymer arrays, enabling the use of organic polymer semiconductors in large-area, high-performance electronic devices and providing a new path for the fabrication of flexible displays and wearable electronics in the future.

Optimized coaxial focused electrohydrodynamic jet printing of highly ordered semiconductor sub-microwire arrays for high-performance organic field-effect transistors.

Patterning of semiconductor polymers is pertinent to preparing and applying organic field-effect transistors (OFETs). In this study, coaxial focused electrohydrodynamic jet printing (high resolution, high speed, and convenient) was used to pattern polymer semiconductors. The influence of the key printing parameters on the width of polymer sub-microwires was evaluated. The width decreased with increasing applied voltage, printing speed, and concentration of the polymer ink. However, the width increased gradually with increasing polymer ink flow rate. A regression analysis model of the relationship between the printing parameters and width was established. Based on a regression analysis/genetic algorithm, the optimal printing parameters were obtained and the correctness of the printing parameters was verified. The optimized printing parameters stabilized the width of the arrays to ca. 110 nm and imparted a smooth morphology. Additionally, the corresponding OFETs exhibited a high mobility of 2 cm2 V-1 s-1, which is 5× higher than that of thin-film-based OFETs. One can conveniently obtain high-performance OFETs from ordered sub-microwire arrays fabricated by CFEJ printing.

Large area polymer semiconductor sub-microwire arrays by coaxial focused electrohydrodynamic jet printing for high-performance OFETs.

Large area and highly aligned polymer semiconductor sub-microwires were fabricated using the coaxial focused electrohydrodynamic jet printing technology. As indicated by the results, the sub-microwire arrays have smooth morphology, well reproducibility and controllable with a width of ~110 nm. Analysis shows that the molecular chains inside the sub-microwires mainly exhibited edge-on arrangement and the π-stacking direction (010) of the majority of crystals is parallel to the long axis of the sub-microwires. Sub-microwires based organic field effect transistors showed high mobility with an average of 1.9 cm2 V-1 s-1, approximately 5 times higher than that of thin film based organic field effect transistors. In addition, the number of sub-microwires can be conveniently controlled by the printing technique, which can subsequently concisely control the performance of organic field effect transistors. This work demonstrates that sub-microwires fabricated by the coaxial focused electrohydrodynamic jet printing technology create an alternative path for the applications of high-performance organic flexible device.

Simulation and Printing of Microdroplets Using Straight Electrode-Based Electrohydrodynamic Jet for Flexible Substrate.

Electrohydrodynamic jet (e-jet) printing is a modern and decent fabrication method widely used to print high-resolution versatile microstructures with features down to 10 µm. It is currently difficult to break nanoscale resolution (<100 nm) due to limitations of fluid properties, voltage variations, and needle shapes. This paper presents developments in drop-on-demand e-jet printing based on a phase-field method using a novel combined needle and straight electrode to print on a flexible PET substrate. Initially, the simulation was performed to form a stable cone jet by coupling an innovative straight electrode parallel to a combined needle that directs the generation of droplets at optimized parameters, such as f = 8.6 × 10−10 m3s−1, Vn = 9.0 kV, and Vs = 4.5 kV. Subsequently, printing experiments were performed using optimized processing parameters and all similar simulation conditions. Microdroplets smaller than 13 µm were directly printed on PET substrate. The model is considered unique and powerful for printing versatile microstructures on polymeric substrates. The presented method is useful for MEMS technology to fabricate various devices, such as accelerometers, smartphones, gyroscopes, sensors, and actuators.

Molecular cloning, expression HSP70 and its response to bacterial challenge and heat stress in Microptenus salmoides.

The gene encoding HSP70 was isolated from Microptenus salmoides by homologous cloning and rapid amplification of cDNA ends (RACE). The HSP70 transcripts were 2116 bp long and contained 1953 open reading frames encoding proteins of 650 amino acids with a molecular mass of 71.2 kDa and theoretical isoelectric point of 5.22. The qRT-PCR analysis showed that the HSP70 gene was differentially expressed in various tissues under normal conditions, and the highest HSP70 level was observed in the spleen and the lowest levels in the muscle and heart. The clear time-dependent expression level of HSP70 was observed after bacterial challenge and heat stress. A significant increase in HSP70 expression level was detected and reached a maximum at 3 h and 6 h in liver, spleens and gill tissues after Aeromonas hydrophila infection and heat stress, respectively (P < 0.05). As time progressed, the expression of HSP70 transcript was downregulated and mostly dropped back to the original level at 48 h. The concentration of cortisol, aspartate aminotransferase (AST) and alanine aminotransferase (ALT) increased as the time of stress progressed, with the highest level found on 3 h and later declined rapidly and reached to the control levels at the 48 h. Those results suggested that HSP70 was involved in the immune response to bacterial challenge and heat stress. The cloning and expression analysis of the HSP70 provide theoretical basis to further study the mechanism of anti-adverseness in Microptenus salmoides.