Optical Property Stability of Light-Cured versus Precured CAD-CAM Composites.

Objective: The aim of this study was to evaluate the optical property changes after staining of precured (PC) and light-cured (LC) composites. Materials and Methods: Specimens were prepared using different LC composites (GrandioSO-Voco, Filtek Z350-3M/ESPE, Opallis-FGM, and Kalore-GC) and four PC blocks (Grandio Blocs-Voco, Lava Ultimate-3M ESPE, Brava Block-FGM, and Cerasmart-GC) from the same manufacturers (n = 20). Baseline color, gloss, translucency, and fluorescence were evaluated. The staining protocol was performed for 15 days, and the final optical properties were reevaluated. Results: The changes in each property were calculated (ΔGloss, ΔTranslucency, ΔFluorescency, ΔE ∗ 00). Data were analyzed by ANOVA and Tukey's test (α = 5%). Changes in all properties were observed after staining for all materials, with darkening and reduction of gloss, fluorescence, and translucency. Nonsignificant differences were observed between the light-cured and precured materials of the same manufacturer for ΔG and ΔT, but significant differences existed for ΔF and ΔE ∗ 00. For ΔF, the only significant differences were observed between Brava Block and Opallis (smaller). For ΔE ∗ 00, only the light-cured composites GrandioSO and Z350 showed significantly less change than the corresponding blocks. Precured composites were affected the same way as light-cured ones by the staining in relation to the reduction of gloss and translucency. Conclusion: A higher reduction in fluorescence was observed for only one brand of block and was similar for the others. The two brands of light-cured materials showed less staining, while for the others, the staining was similar. The effects of staining vary according to the composite formulation.

Bond Stability of a Universal Adhesive System to Eroded/Abraded Dentin After Deproteinization.

OBJECTIVE: Erosive/abrasive challenges can potentially compromise bonding to dentin. Aiming to improve the quality and stability of bonding to this substrate, this study investigated the combined effect of erosion and toothbrush abrasion on the microtensile bond strength (µTBS) stability to dentin using a universal adhesive system in total and self-etching modes, associated or not associated with deproteinization. METHODS: Bovine dentin specimens were divided into five groups according to the organic matrix condition (n=20): control (C); erosion (E); erosion + abrasion (EA); erosion + sodium hypochlorite (EH); erosion + abrasion + sodium hypochlorite (EAH). The groups were further divided (n=10) according to the mode of application (total or self-etching) of a universal adhesive. After the bonding procedure, composite blocks were built up, and the samples were cut to obtain sticks for µTBS testing. For each specimen, one-half of the sticks was immediately tested, and the other one-half was tested after artificial aging (5000 thermocycles, 5°C and 55°C). RESULTS: Three-way analysis of variance (α=5%) showed a significant difference for the triple interaction ( p=0.0007). Higher µTBS means were obtained for the EH and EAH groups compared with the E and EA groups. The control group showed immediate µTBS values similar to that of the E and EA groups for both bond strategies. CONCLUSIONS: Erosion and erosion/abrasion did not significantly influence the immediate µTBS to dentin. Artificial aging reduced µTBS values for the groups C, E, and EA using the total-etching mode. Deproteinization maintained the bond stability to artificially aged eroded and eroded/abraded dentin.

Zymography of Hybrid Layers Created Using Extrafibrillar Demineralization.

A chelate-and-rinse extrafibrillar calcium chelation dentin bonding concept has recently been developed and investigated for its effectiveness in improving resin-dentin bonding by bridging the gap between wet and dry dentin bonding. The objective of the present study was to evaluate the gelatinolytic activity of hybrid layers (HLs) created using the chelate-and-rinse bonding technique. Gelatinolytic activity within the HL was examined using in situ zymography and confocal laser-scanning microscopy after 24-h storage or after thermomechanical cycling. Dentin specimens were bonded with Prime&Bond NT (Dentsply Sirona) after conditioning with 15 wt% phosphoric acid for 15 s (control) or 15 wt% polymeric chelators (sodium salt of polyacrylic acid; PAAN) of 2 different molecular weights for 60 s. For each reagent, bonding was performed using dry-bonding and wet-bonding techniques ( n = 10). Slices containing the adhesive-dentin interface were covered with fluorescein-conjugated gelatin and examined with a confocal laser-scanning microscope. Fluorescence intensity emitted by the hydrolyzed fluorescein-conjugated gelatin was quantified. Gelatinolytic activity was expressed as the percentage of green fluorescence emitted within the HL. After storage for 24 h, enzymatic activity was only detected within the completely demineralized phosphoric acid-etched dentin, with values derived from dry bonding higher than those from wet bonding ( P < 0.05). Almost no fluorescence signals were detected within the HL when dentin was conditioned with PAANs compared with the controls ( P < 0.05). After thermomechanical cycling, enzymatic activities significantly increased for the phosphoric acid-conditioned, drying-bonding group compared with 24-h storage ( P < 0.05). The present study showed that the use of the chelate-and-rinse bonding concept for both dry-bonding and wet-bonding approaches results in the near absence of matrix-bound collagenolytic activities in the HL even after aging. This may be attributed to fossilization of endogenous proteases via preservation of intrafibrillar minerals within the dentin collagen matrix.

Longitudinal Evaluation of Bond Strength to Enamel of Dental Adhesive Systems Associated with Nd:YAG Laser.

OBJECTIVES: This study evaluated the durability of bond strength to enamel using total-etch (Single Bond/SB) and self-etch (Clearfil SE Bond/CSEB) adhesives associated with neodymium:yttrium-aluminu-garnet (Nd:YAG) laser irradiation through the uncured adhesives. METHODS: Bovine incisors were worn to expose an area of enamel and were divided into four groups: group 1 (control) SB + polymerization; group 2 (control) CSEB + polymerization; group 3 (laser) - SB + Nd:YAG laser (174.16 J/cm(2)) + polymerization; and group 4 (laser) CSEB + Nd:YAG (174.16 J/cm(2)) + polymerization. Blocks of composite were fabricated and stored for 24 hours or 12 months, sectioned into beams, and submitted to microtensile tests. Results were analyzed by three-way analysis of variance (ANOVA) (adhesive, technique, and storage time) and Tukey tests. RESULTS: ANOVA revealed significant differences for adhesive × technique and technique × storage time (p<0.05). The mean values (MPa) for interaction adhesive × technique (standard deviation) were as follows: SB/control = 35.78 (6.04)a; SB/laser = 26.40 (7.25)b, CSEB/control = 26.32 (5.71)b, CSEB/laser = 23.90 (7.49)b. For interaction technique × storage time the mean values were as follows: control/24 hours = 32.58 (6.49)a; control/12 months = 29.52 (8.38)a; laser/24 hours = 29.37 (5.71)a; laser/12 months = 20.92 (6.5)b. Groups with the same letters showed no statistically significant differences. CONCLUSION: Scanning electron microscope analysis showed evident areas of micromorphological alterations in lased samples after 12 months of water storage. Nd:YAG laser irradiation of enamel through unpolymerized total-etch adhesive significantly reduced bond strength compared with the control. Bond strength decreased when enamel samples irradiated with Nd:YAG laser through unpolymerized adhesives were stored in water for 12 months.

Effect of hydrogen peroxide concentration on enamel color and microhardness.

OBJECTIVES: The aim of this study was to investigate the effect of hydrogen peroxide gels with different concentrations (20%, 25%, 30%, and 35%) on enamel Knoop microhardness (KNH) as well as on changes in dental color (C). METHODS: Cylindrical specimens of enamel/dentin (3-mm diameter and 2-mm thickness) were obtained from bovine incisors and randomly divided into six groups (n=20), according to the concentration of the whitening gel (20%, 25%, 30%, 35%, control, thickener). After polishing, initial values of KNH0 and color measurement, assessed by spectrophotometry using the CIE L*a*b* system, were taken from the enamel surface. The gels were applied on the enamel surface for 30 minutes, and immediate values of KNHi were taken. After seven days of being stored in artificial saliva, new measures of KNH7 and color (L7* a7* b7*, for calculating ΔE, ΔL, and Δb) were made. Data were submitted to statistical analysis of variance, followed by Tukey test (p<0.05). RESULTS: Differences in gel concentration and time did not influence the microhardness (p=0.54 and p=0.29, respectively). In relation to color changes, ΔE data showed that the 35% gel presented a higher color alteration than the 20% gel did (p=0.006). CONCLUSION: Bleaching with 35% hydrogen peroxide gel was more effective than with the 20% gel, without promoting significant adverse effects on enamel surface microhardness.

Influence of pH on the effectiveness of hydrogen peroxide whitening.

OBJECTIVE: To evaluate the influence of pH on the bleaching effect of hydrogen peroxide on chromogen agents. METHOD: Hydrogen peroxide 50% was mixed with red wine or with an alcoholic solution of tobacco in glass cuvettes, resulting in final peroxide concentrations of 16.97% and 21.12%, respectively. The pH of this mixture was measured and adjusted with 3.3 M HCl solution or 2.5 M NaOH solution to obtain the final pH values of 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, and 9.0. After mixing, the color of these solutions was evaluated in a reflectance spectrophotometer; readings were repeated after 10 minutes for the wine solution and 20 minutes for the tobacco solution. Ten samples were prepared for each solution at each pH. Color changes (Delta E) were calculated. The data were statistically analyzed using analysis of variance one-way and Tukey tests, with a significance level of 5%. RESULTS: There were significant differences among the different pH values for the wine and tobacco solutions (p=0.0001). The Tukey test showed that for both solutions, pH 9.0 resulted in a significantly greater bleaching effect than the other values tested. CONCLUSION: The efficacy of hydrogen peroxide bleaching is directly proportional to the increase in its pH.

Confining ss-DNA/carbon nanotube complexes in ordered droplets.

In 1/1 mass ratio mixtures made of single strand DNA and single-walled carbon nanotubes lyotropic nematic phases are formed. The process is assisted by segregative phase separation procedures. The liquid crystalline order occurring therein was confirmed by optical polarizing microscopy and zero-shear rheology. The resulting nematic droplets were dispersed in protein or cationic surfactant solutions, under appropriate pH and/or ionic strength conditions. The components of the hosting fluid(s) rapidly adsorb onto the droplets, form a permanent peel on their surface, and confine them. The peel resists osmotic gradients and has significant stability. The distribution of the species in the droplet and in the peel was determined by SEM. Data indicate that the peel contains protein or surfactant, depending on the titrant, when the core is rich in DNA and nanotubes. According to electron microscopy, nematic order in the droplets is partly retained.

Influence of different surface treatments on bond strength of resin composite using the intrinsic characterization technique.

OBJECTIVE: This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM). MATERIALS AND METHODS: Using a silicone matrix, 240 blocks of composite (Z350/3M ESPE) were fabricated. The surfaces received different surface treatments, totaling four groups (n=60): Group C (control group), no surface treatment was used; Group PA, 37% phosphoric acid for one minute and washing the surface for two minutes; Group RD, roughening with diamond tip; and Group AO, aluminum oxide. Each group was divided into four subgroups (n=15), according to the LCCMs used: Subgroup WT, White Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup BT, Black Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup WK, White Kolor Plus pigment (Kerr) LCCM; Subgroup BK, Brown Kolor Plus pigment (Kerr) LCCM. All materials were used according to the manufacturer's instructions. After this, block composites were fabricated over the LCCMs. Specimens were sectioned and submitted to microtensile testing to evaluate the bond strength at the interface. Data were submitted to two-way analysis of variance (ANOVA) (surface treatment and LCCMs) and Tukey tests. RESULTS: ANOVA presented a value of p<0.05. The mean values (±SD) for the factor surface treatment were as follows: Group C, 30.05 MPa (±5.88)a; Group PA, 23.46 MPa (±5.45)b; Group RD, 21.39 MPa (±6.36)b; Group AO, 15.05 MPa (±4.57)c. Groups followed by the same letters do not present significant statistical differences. The control group presented significantly higher bond strength values than the other groups. The group that received surface treatment with aluminum oxide presented significantly lower bond strength values than the other groups. CONCLUSION: Surface treatments of composite with phosphoric acid, diamond tip, and aluminum oxide significantly diminished the bond strength between composite and the LCCMs.

Efficacy of mouth rinses and toothpaste on tooth whitening.

OBJECTIVES: People increasingly desire tooth whitening. Considering the wide range of whitening products on the market, this study evaluated the efficacy of whitening toothpastes and mouth rinses compared with the 10% carbamide peroxide (CP) whitening gel. METHODS: We obtained 120 cylindrical specimens from bovine teeth, which were darkened for 24 hours in a coffee solution. The color measurement was performed by a spectrophotometer using the CIE L*a*b* system, and specimens were divided into six groups according to the use of the following agents: group 1, conventional fluoridated toothpaste; group 2, Close Up White Now; group 3, Listerine Whitening; group 4, Colgate Plax Whitening; group 5, experimental mouth rinse with Plasdone; and group 6, 10% CP Whiteness Perfect. After the simulation of 12 weeks of treatment for groups 1 to 5 and 14 days of treatment for group 6, the specimens were subjected to a new color reading. RESULTS: Data were subjected to one-way analysis of variance (α=0.05), which showed significant differences among groups after 12 weeks for ΔE (p=0.001). Results of the Tukey test revealed that groups 3, 4, and 6 presented significantly higher color alteration than groups 1, 2, and 5. CONCLUSIONS: The whitening toothpaste Close Up White Now and the experimental mouth rinse with Plasdone showed similar color alteration as conventional toothpaste after a 12-week treatment simulation. These groups presented significantly lower color alteration compared with whitening mouth rinses Listerine and Colgate Plax Whitening, which showed similar results to those observed after 14 days of bleaching with 10% CP treatment.

Effect of biomimetic remineralization on the dynamic nanomechanical properties of dentin hybrid layers.

The mineral and organic phases of mineralized dentin contribute co-operatively to its strength and toughness. This study tested the null hypothesis that there is no difference in nano-dynamic mechanical behavior (complex modulus-E*; loss modulus-E''; storage modulus-E'; in GPa) of dentin hybrid layers (baseline: E*, 3.86 ± 0.24; E'', 0.23 ± 0.05; E', 3.85 ± 0.24) created by an etch-and-rinse adhesive in the presence or absence of biomimetic remineralization after in vitro aging. Using scanning probe microscopy and nano-dynamic mechanical analysis, we demonstrated that biomimetic remineralization restored the nano-dynamic mechanical behavior of heavily remineralized, resin-sparse regions of dentin hybrid layers (E*, 19.73 ± 3.85; E'', 8.75 ± 3.97; E', 16.02 ± 2.58) to those of the mineralized dentin base (E*, 19.20 ± 2.42; E'', 6.57 ± 1.96; E', 17.39 ± 2.0) [p > 0.05]. Conversely, those resin-sparse, water-rich regions degraded in the absence of biomimetic remineralization, with significant decline [p < 0.05] in their complex and storage moduli (E*, 0.83 ± 0.35; E'', 0.88 ± 0.24; E', 0.62 ± 0.32). Intrafibrillar apatite deposition preserves the integrity of resin-sparse regions of hybrid layers by restoring their nanomechanical properties to those exhibited by mineralized dentin.

The critical barrier to progress in dentine bonding with the etch-and-rinse technique.

OBJECTIVES: The lack of durability in resin-dentine bonds led to the use of chlorhexidine as MMP-inhibitor to prevent the degradation of hybrid layers. Biomimetic remineralisation is a concept-proven approach in preventing the degradation of resin-dentine bonds. The purpose of this study is to examine the integrity of aged resin-dentine interfaces created with a nanofiller-containing etch-and-rinse adhesive after the application of these two approaches. METHODS: The more established MMP-inhibition approach was examined using a parallel in vivo and in vitro ageing design to facilitate comparison with the biomimetic remineralisation approach using an in vitro ageing design. Specimens bonded without chlorhexidine exhibited extensive degradation of the hybrid layer after 12 months of in vivo ageing. RESULTS: Dissolution of nanofillers could be seen within a water-rich zone within the adhesive layer. Although specimens bonded with chlorhexidine exhibited intact hybrid layers, water-rich regions remained in those hybrid layers and degradation of nanofillers occurred within the adhesive layer. Specimens subjected to in vitro biomimetic remineralisation followed by in vitro ageing demonstrated intrafibrillar collagen remineralisation within hybrid layers and deposition of mineral nanocrystals in nanovoids within the adhesive. CONCLUSIONS: The impact was realized by understanding the lack of an inherent mechanism to remove water from resin-dentine interfaces as the critical barrier to progress in bonding with the etch-and-rinse technique. The experimental biomimetic remineralisation strategy offers a creative solution for incorporating a progressive hydration mechanism to achieve this goal, which warrants its translation into a clinically applicable technique.

Choque cardiogénico: historia, fisiopatología e implicaciones terapeúticas: parte II / Cardiogenic shock: history, pathophysiology and therapeutical implications. Part II

El choque cardiogénico es la principal causa de muerte entre los pacientes que presentan un síndrome coronario agudo. Después de la revisión histórica y de los conceptos fisiológicos y fisiopatológicos de esta condición clínica expuesta en la primera parte, se revisa su abordaje terapéutico, principalmente la revascularización de emergencia con angioplastía o cirugía.

Choque cardiogénico: historia, fisiopatología e implicaciones terapeúticas. Parte I / Cardiogenic shock: history, pathophysiology and therapeutic implications. Part I

El choque cardiogénico es la principal causa de muerte entre los pacientes que presentan un sindrome coronario agudo. Se presenta una revisión histórica y conceptos fisiológicos y fisiopatológicos de esta condición clínica que son la base para su abordaje terapéutico, principalmente la revasculrización de emergencia con angioplastia o cirugía.

Experiencia con el uso del marcapasos Activitrax / Experience with the use of Activitrax pacemaker

Este estudio tiene como objetivo dar a conocer la experiencia acumulada con el uso del marcapasos Activitrax, la técnica de implante y sus resultados posteriores. El estudio muestra los primeros treinta casos del servicio de Cirugía Cardíaca del Hospital México, donde se inició la implantación de generadores de pulso modelo 8403 VVIR, (Medtronic Inc. Mineapolis Mn). Los pacientes fueron analizados teniendo en cuenta el sexo, edad y enfermedad de fondo, además se describe la técnica de implante y los resultados obtenidos.

Pericarditis constrictiva: experiencia quirúrgica en el Hospital México / Constrictive pericarditis: surgical experience in the Hospital México

Se estudiaron trece pacientes tratados quirúrgicamente por pericarditis constrictiva, en el servicio de Cirugía Cardíaca del Hospital México. Fueron especial interés, la etiología en cada caso, siendo la TB la causa mas frecuentemente observada, y los síntomas recopilados de relevancia clínica. Se observó un predominio del sexo femenino en un 61 por ciento (n:8) con una edad promedio de 34 a. La cirugía practicada fue la pericardiectomía parcial por abordaje subxifoideo en el 47 por ciento de los casos, y un abordajetransesternal en un 53 por ciento, este último con mejores resultados en cuanto a mortalidad operatoria que fue del 0 por ciento. La mortalidad global fue del 23 por ciento (n:3), y estuvo relacionada directamente con la enfermedad subyacente. Se revisa la literatura y se comentan los abordajes incluyendo el uso de circulación extracopórea.

In vivo effectiveness of lithium on impaired neutrophil chemotaxis in Shwachman-Diamond syndrome.

The effect of lithium treatment on the impaired neutrophil chemotactic function of a patient affected by Shwachman-Diamond syndrome is reported. We found that (1) a cytoskeletal cellular defect seems to be involved in the impairment of neutrophil function (and perhaps of cellular secretion and chondrocyte function) in the syndrome; (2) intermittent neutropenia is always present in the syndrome, and (3) lithium seems capable, in addition to its capacity of inducing leukocytosis, of modulating leukocyte functions by modulating the microtubular system. The drug, at usual therapeutic dosage, was able to normalize neutrophil functions without side effects. As no therapy is available in this syndrome to date, our data suggest the therapeutic use of lithium in order to improve these cytoskeleton-mediated functions and the degree of neutropenia.

[Clinical aspects of celiac disease. Comparison of 2 periods: before and after the introduction of antigliadin antibody determination in clinical practice]. / Gli aspetti clinici della malattia celiaca. Confronto tra due periodi: prima e dopo l'introduzione del dosaggio degli anticorpi antigliadina nella pratica clinica.

The clinical aspects of coeliac disease before and after anti-gliadin antibodies (AGA) assessment in clinical practice, referring to personal experience (107 cases in the period 1976-1988) are described. AGA determination has executed by two different ELISA methods. The diagnosis of coeliac disease in the period 1976-1986 has been made according to ESPGAN criteria, while in the last two years following the recent SIP advice. After 1987 with the introduction of AGA assay, the number of diagnosis/year of coeliac disease has increased three times in respect of the period 1976-1986. We have observed a more marked increase of the late beginning forms (from 2.8 to 10 diagnosis/year) in respect of the early beginning ones (from 3.7 to 7.5 diagnosis/year) and of the atypical forms (from 0.7 to 9 diagnosis/year) in respect of the typical ones (from 5.8 to 8.5 diagnosis/year). According to these data we think that prevalence of coeliac disease in our country is probably underestimated. AGA determination is at time most effective mean to make a screening of coeliac disease in the population. According to us the largest employment of this method in the next years could take a most exact estimate of the coeliac disease prevalence in our country.