ABSTRACT
The adsorption of Acid Violet 17 (AV17) was carried out using various activated carbons prepared from sunflower seed hull (SSH), an agricultural solid waste by-product. The effect of parameters such as agitation time, initial dye concentration, adsorbent dosage, pH and temperature were studied. The Langmuir and Freundlich isotherm models were applied and the Langmuir model was found to best report the equilibrium isotherm data. Langmuir adsorption capacity was found to be 116.27 mg/g. Kinetic data followed pseudo-second-order kinetics. Maximum colour removal was observed at pH 2.0. It was observed that the rate of adsorption improves with increasing temperature and the process is endothermic. The adsorbent surface was analysed with a scanning electron microscope. The results indicate that activated sunflower seed hull could be an attractive option for colour removal from dilute industrial effluents.
Subject(s)
Carbon/chemistry , Rosaniline Dyes/isolation & purification , Water Pollutants, Chemical/isolation & purification , Water Purification/instrumentation , Water Purification/methods , Water/chemistry , Adsorption , Charcoal/chemistry , Helianthus , Hydrogen-Ion Concentration , Kinetics , Models, Chemical , Plant Extracts , Rosaniline Dyes/analysis , Rosaniline Dyes/chemistry , Seeds/metabolism , Thermodynamics , Waste Disposal, Fluid , Water Pollutants, Chemical/analysisABSTRACT
In this study, experiments were conducted to investigate the production of biogas from municipal solid waste (MSW) and domestic sewage by using anaerobic digestion process. The batch type of reactor was operated at room temperature varying from 26 to 36 degrees C with a fixed hydraulic retention time (HRT) of 25 days. The digester was operated at different organic feeding rates of 0.5, 1.0, 2.3, 2.9, 3.5 and 4.3kg of volatile solids (VS)/m(3) of digester slurry per day. Biogas generation was enhanced by the addition of domestic sewage to MSW. The maximum biogas production of 0.36m(3)/kg of VS added per day occurred at the optimum organic feeding rate of 2.9kg of VS/m(3)/day. The maximum reduction of total solids (TS) (87.6%), VS (88.1%) and chemical oxygen demand (COD) (89.3%) occurred at the optimum organic loading rate of 2.9kg of VS/m(3)/day. The quality of biogas produced during anaerobic digestion process was 68-72%.
Subject(s)
Bioreactors , Energy-Generating Resources , Waste Management/methodsABSTRACT
The present study was carried out to gain knowledge of current surface ozone concentrations and the effects of meteorological parameters in the highly populated urban area of Chennai, in South India. We have reported measurement results of surface ozone (O(3)) and meteorological parameters from 17th March to 10th October 2005. A photometric ozone analyzer continuously recorded the ozone concentrations at this site. The present study deals with the statistical characteristics of daily and monthly mean ozone levels under different meteorological conditions. The highest ozone concentrations were recorded in ESE-SE sectors. The monthly mean concentrations were higher in May (23+/-14 ppb) and lower in April at this site (10+/-8 ppb). The maximum hourly ozone concentration reached 69 ppb on 21st April.
Subject(s)
Ozone/chemistry , Cities , India , Light , Oceans and Seas , Time FactorsABSTRACT
The adsorption of Acid dye, C.I. Acid Red 151 from aqueous solution onto modified hectorite at different concentrations and pH has been studied. Hectorite clay has been modified using two cationic surfactants, cetyldimethylbenzylammonium chloride and cetylpyridinium chloride. Present experimental study shows that acidic pH favours enhanced adsorption. The adsorption isotherms are described by means of Langmuir and Freundlich isotherms. The adsorption capacity has been found to be 208.33 and 169.49 mg g(-1) for the modified cetyldimethylbenzylammonium chloride-hectorite (CDBA-hect) and cetylpyridinium chloride (CP-hect), respectively.
Subject(s)
Azo Compounds/chemistry , Coloring Agents/chemistry , Naphthalenes/chemistry , Silicates/chemistry , Adsorption , Chemical Phenomena , Chemistry, Physical , Hydrogen-Ion Concentration , Thermodynamics , X-Ray DiffractionABSTRACT
During the summer of 2005, concentrations of surface ozone (O(3)), oxides of nitrogen (NO(x)), respirrable suspended particulate matter (RSPM) and total suspended particulate matter (TSPM), relative humidity (RH), wind speed (WS) and wind direction (WD) were collected over successive periods of about 24 h at five sites. UV photometric ozone analyzer was used to measure the concentration of surface O(3). The study deals with the characteristics of hourly and daily mean surface O(3) under different climatic conditions, such as temperature, relative humidity, wind speed and wind direction and other pollutant concentrations. The maximum hourly O(3) concentration reached 53 ppb on 17th May. The ground-level O(3) concentration in Chennai varied between 2 and 53 ppb. The concentration of NO(x) and O(3) were below the prescribed limits. The TSPM values were exceeded the National Ambient Air Quality Standards (NAAQS) at Koyambedu, Mandaveli, Taramani and Vallalar Nagar study area.
Subject(s)
Air Pollution/analysis , Environmental Monitoring , Humidity , India , Nitrogen Oxides/analysis , Oxidants, Photochemical/analysis , Ozone/analysis , Seasons , Sunlight , Temperature , Time FactorsABSTRACT
Removal of Acid Red 151 from aqueous solution at different dye concentrations, adsorbent doses and pH has been studied. The bentonite clay has been modified using cationic surfactants, which has been confirmed using XRD and FT-IR analyses. Experimental result has shown that the acidic pH favours the adsorption. The adsorption isotherms are described by means of Langmuir and Freundlich isotherms. The adsorption capacity has been found to be 357.14 and 416.66 mg g(-1) for the cetyldimethylbenzylammonium chloride-bentonite (CDBA-bent) and cetylpyridinium chloride-bentonite (CP-bent), respectively. Kinetic studies show that the adsorption followed second-order kinetics.
