Radiological comparison of a FDNPP waste storage site during and after construction.

The clean-up effort that is occurring across the region affected by the 2011 Fukushima Daiichi Nuclear Power Plant accident is unprecedented in its magnitude as well as the financial cost that will eventually result. A major component of this remediation is the stripping of large volumes of material from the land surface, depositing this into large waste storage bags before placing these 1 cubic meter bags into specially constructed stores across Fukushima Prefecture. In this work, using an unmanned aerial vehicle to perform radiological surveys of a site, the time-resolved distribution of contamination during the construction of one of these waste storage sites was assessed. The results indicated that radioactive material was progressively leaching from the store into the surrounding environment. A subsequent survey of the site conducted eight months later revealed that in response to this survey and remedial actions, the contamination issue once existing on this site had been successfully resolved. Such results highlight the potential of low-altitude unmanned aerial systems to easily and rapidly assess site-wide changes over time - providing highly-visual results; therefore, permitting for prompt remedial actions to be undertaken as required. Use of UAV radiation mapping and airborne photogrammetry to produce a time-resolved assessment of remediation efforts within a Fukushima temporary storage facility.

In-situ, time resolved monitoring of uranium in BFS:OPC grout. Part 2: Corrosion in water.

To reflect potential conditions in a geological disposal facility, uranium was encapsulated in grout and submersed in de-ionised water for time periods between 2-47 weeks. Synchrotron X-ray Powder Diffraction and X-ray Tomography were used to identify the dominant corrosion products and measure their dimensions. Uranium dioxide was observed as the dominant corrosion product and time dependent thickness measurements were used to calculate oxidation rates. The effectiveness of physical and chemical grout properties to uranium corrosion and mobilisation is discussed and Inductively Coupled Plasma Mass Spectrometry was used to measure 238U(aq) content in the residual water of several samples.

Lightweight aerial vehicles for monitoring, assessment and mapping of radiation anomalies.

The Fukushima Daiichi nuclear power plant (FDNPP) incident released a significant mass of radioactive material into the atmosphere. An estimated 22% of this material fell out over land following the incident. Immediately following the disaster, there was a severe lack of information not only pertaining to the identity of the radioactive material released, but also its distribution as fallout in the surrounding regions. Indeed, emergency aid groups including the UN did not have sufficient location specific radiation data to accurately assign exclusion and evacuation zones surrounding the plant in the days and weeks following the incident. A newly developed instrument to provide rapid and high spatial resolution assessment of radionuclide contamination in the environment is presented. The device consists of a low cost, lightweight, unmanned aerial platform with a microcontroller and integrated gamma spectrometer, GPS and LIDAR. We demonstrate that with this instrument it is possible to rapidly and remotely detect ground-based radiation anomalies with a high spatial resolution (<1 m). Critically, as the device is remotely operated, the user is removed from any unnecessary or unforeseen exposure to elevated levels of radiation.