ABSTRACT
This work highlights the development of a superior cathode|electrolyte interface for the quasi solid-state rechargeable zinc metal battery (QSS-RZMB) by a novel hydrogel polymer electrolyte using an ultraviolet (UV) light-assisted in situ polymerization strategy. By integrating the cathode with a thin layer of the hydrogel polymer electrolyte, this technique produces an integrated interface that ensures quick Zn2+ ion conduction. The coexistence of nanowires for direct electron routes and the enhanced electrolyte ion infiltration and diffusion by the 3D porous flower structure with a wide open surface of the Zn-MnO electrode complements the interface formation during the in situ polymerization process. The QSS-RZMB configured with an integrated cathode (i-Zn-MnO) and the hydrogel polymer electrolyte (PHPZ-30) as the separator yields a comparable specific energy density of 214.14 Wh kg-1 with that of its liquid counterpart (240.38 Wh kg-1, 0.5 M Zn(CF3SO3)2 aqueous electrolyte). Other noteworthy features of the presented QSS-RZMB system include its superior cycle life of over 1000 charge-discharge cycles and 85% capacity retention with 99% coulombic efficiency at the current density of 1.0 A g-1, compared to only 60% capacity retention over 500 charge-discharge cycles displayed by the liquid-state system under the same operating conditions.
ABSTRACT
Zinc anode deterioration in aqueous electrolytes, and Zn dendrite growth is a major concern in the operation of aqueous rechargeable Zn metal batteries (AZMBs). To tackle this, the replacement of aqueous electrolytes with a zinc hydrogel polymer electrolyte (ZHPE) is presented in this study. This method involves structural modifications of the ZHPE by phytic acid through an ultraviolet (UV) light-induced photopolymerization process. The high membrane flexibility, high ionic conductivity (0.085 S cm-1), improved zinc corrosion overpotential, and enhanced electrochemical stability value of ≈2.3 V versus Zn|Zn2+ show the great potential of ZHPE as an ideal gel electrolyte for rechargeable zinc metal hydrogel batteries (ZMHBs). This is the first time that the dominating effect of chelation of phytic acid with M2+ center over H-bonding with water is described to tune the gel electrolyte properties for battery applications. The ZHPE shows ultra-high stability over 360 h with a capacity of 0.50 mAh cm-2 with dendrite-free plating/stripping in Zn||Zn symmetric cell. The fabrication of the ZMHB with a high-voltage zinc hexacyanoferrate (ZHF) cathode shows a high-average voltage of ≈1.6 V and a comparable capacity output of 63 mAh g-1 at 0.10 A g-1 of the current rate validating the potential application of ZHPE.
