ABSTRACT
Ionic liquids (ILs) are efficient media for the liquid-phase sulfuric acid reaction. Under mild situations, the reaction of H2S with CH4 in ILs happens extremely quick and virtually complete, resulting in liquid sulfuric acid (H2SO4(l)). 1-hexyl-3-methylimidazolium chloride ([hmim][Cl]) ILs were formerly the most effective at capturing and converting H2S. It can convert H2S to H2SO4(l) with a proportion of up to 96%. This study aimed to develop cutting-edge techniques and assess their applicability for different acidic gas capacities and H2S amounts by considering three sustainability metrics which are people (safety), planet (ecological), and profit. Then, to maximize profit while lowering the global warming potential (GWP), fire explosion damage index (FEDI), and toxicity damage index (TDI), a multiobjective optimization (MOO) case was performed. The trade-off between economic, environmental, and safety performance was expressed through Pareto-optimal solutions. The improved wet sulfuric acid (WSA)-based IL method was safer (lower fire and explosion damage index), ecologically friendly (lower GWP), and portable. The findings indicate that the improved WSA-based on IL gives the optimum results compared to conventional WSA processes, such as the profit of 5688$/h increased from 1896$/h, the GWP of 0.0138-ton CO2-eq decreased from 0.0275-ton CO2-eq, the TDI of 6.72 decreased from 13.44, and the FEDI of 6.18 decreased from 20.6, respectively. This discovery opens the door to a viable strategy for capturing and converting H2S from an acid gas stream.
ABSTRACT
This study focuses on the effect of modified silica fillers by [EMIN][Tf2N] via physical adsorption on the CO2 separation performance of a mixed matrix membrane (MMM). The IL-modified silica was successfully synthesized as the presence of fluorine element was observed in both Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectrometer (XPS) analyses. The prepared MMMs with different loadings of the IL-modified silica were then compared with an unmodified silica counterpart and neat membrane. The morphology of IL-modified MMMs was observed to have insignificant changes, while polymer chains of were found to be slightly more flexible compared to their counterpart. At 2 bar of operating pressure, a significant increase in performance was observed with the incorporation of 3 wt% Sil-IL fillers compared to that of pure polycarbonate (PC). The permeability increased from 353 to 1151 Barrer while the CO2/CH4 selectivity increased from 20 to 76. The aforementioned increment also exceeded the Robeson upper bound. This indicates that the incorporation of fillers surface-modified with ionic liquid in an organic membrane is worth exploring for CO2 separation.
ABSTRACT
Malaysia is one of the countries that is well known for its palm oil based products and exports all over the world. Over the years, palm oil mill has been rising at alarming rate in Malaysia, causing palm oil-based wastes to increase especially palm oil mill effluent (POME). POME in Malaysia are channelled into water bodies such as rivers after treated mostly with conventional biological method. However, with current technologies and knowledge, conventional POME treatments are seen to be outdated and require major improvements as greenhouse gaseous are emitted to the environment as well as being less cost effective. Integrated systems that combine two or more conventional methods are introduced and reviewed to provide insights on the advantages and disadvantages of the system if it is to be implemented in real life plant. Integrated systems that focus on combining conventional methods are compiled and reviewed specifically for POME treatment. Among the integrated methods that are reviewed includes biological with membrane, adsorption with magnetic field exposure, adsorption with membrane and electrocoagulation with membrane. The systems are seen to give excellent color, chemical oxygen demand (COD) and total suspended solids (TSS) removal with average of higher than 90%. Reduction in space utilization, improved treatment time as well as simplified operating system were reported when integrated systems are applied as compared to conventional treatment of POME.
Subject(s)
Industrial Waste , Waste Disposal, Fluid , Industrial Waste/analysis , Malaysia , Palm Oil , Plant OilsABSTRACT
A petroleum refinery heavily depends on crude oil as its main feedstock to produce liquid fuels and chemicals. In the long term, this unyielding dependency is threatened by the depletion of the crude oil reserve. However, in the short term, its price highly fluctuates due to various factors, such as regional and global security instability causing additional complexity on refinery production planning. The petroleum refining industries are also drawing criticism and pressure due to their direct and indirect impacts on the environment. The exhaust gas emission of automobiles apart from the industrial and power plant emission has been viewed as the cause of global warming. In this sense, there is a need for a feasible, sustainable, and environmentally friendly generation process of fuels and chemicals. The attention turns to the utilization of biomass as a potential feedstock to produce substitutes for petroleum-derived fuels and building blocks for biochemicals. Biomass is abundant and currently is still low in utilization. The biorefinery, a facility to convert biomass into biofuels and biochemicals, is still lacking in competitiveness to a petroleum refinery. An attractive solution that addresses both is by the integration of bio- and petroleum refineries. In this context, the right decision making in the process selection and technologies can lower the investment and operational costs and assure optimum yield. Process optimization based on mathematical programming has been extensively used to conduct techno-economic and sustainability analysis for bio-, petroleum, and the integration of both refineries. This paper provides insights into the context of crude oil and biomass as potential refinery feedstocks. The current optimization status of either bio- or petroleum refineries and their integration is reviewed with the focus on the methods to solve the multi-objective optimization problems. Internal and external uncertain parameters are important aspects in process optimization. The nature of these uncertain parameters and their representation methods in process optimization are also discussed.
ABSTRACT
The competitiveness of algae as biofuel feedstock leads to the growth of membrane filtration as one of promising technologies for algae harvesting. Nanofiber membrane (NFM) was found to be efficient for microalgae harvesting via membrane filtration, but it is highly limited by its weak mechanical strength. The main objective of this study is to enhance the applicability of nylon 6,6 NFM for microalgae filtration by optimizing the operational parameters and applying solvent vapor treatment to improve its mechanical strength. The relaxation period and filtration cycle could be optimized to improve the hydraulic performance. For a cycle of 5 min., relaxation period of ≤2 min shows the highest steady-state permeability of 365 ± 14.14 L m-2 h-1 bar-1, while for 10 min cycle, 3 min. of relaxation period was found optimum that yields permeability of 402 ± 34.47 L m-2 h-1 bar-1. The treated nylon 6,6 NFM was also used to study the effect of aeration rate. It is confirmed that the aeration rate enhances the steady-state performance for both intermittent and continuous mode of aeration. Remarkably, intermittent aeration shows 7% better permeability than the full aeration for all tested condition, which is beneficial for reducing the total energy consumption.
ABSTRACT
Membrane based technologies are highly reliable for water and wastewater treatment, including for removal of total oil and grease from produced water. However, performances of the pressure driven processes are highly restricted by membrane fouling and the application of traditional air bubbling system is limited by their low shear stress due to poor contacts with the membrane surface. This study develops and assesses a novel finned spacer, placed in between vertical panel, for membrane fouling control in submerged plate-and-frame module system for real produced water filtration. Results show that permeability of the panel is enhanced by 87% from 201 to 381â¯L/(m2 h bar). The spacer system can be operated in switching mode to accommodate two-sided panel aeration. This leads to panel permeability increment by 22% higher than the conventional vertical system. The mechanisms of finned spacer in encouraging the flow trajectory was proven by visual observation and flow simulation. The fins alter the air bubbles flow trajectory toward the membrane surface to effectively scour-off the foulant. Overall results demonstrate the efficacy of the developed spacer in projecting the air bubble trajectory toward the membrane surface and thus significantly enhances membrane panel productivity.