Physiochemically Distinct Surface Properties of SU-8 Polymer Modulate Bacterial Cell-Surface Holdfast and Colonization.

SU-8 polymer is an excellent platform for diverse applications due to its high aspect ratio of micro/nanostructure fabrication and exceptional physicochemical and biocompatible properties. Although SU-8 polymer has often been investigated for various biological applications, how its surface properties influence the interaction of bacterial cells with the substrate and its colonization is poorly understood. In this work, we tailor SU-8 nanoscale surface properties to investigate single-cell motility, adhesion, and successive colonization of phytopathogenic bacteria, Xylella fastidiosa. Different surface properties of SU-8 thin films have been prepared using photolithography processing and oxygen plasma treatment. A more significant density of carboxyl groups in hydrophilic plasma-treated SU-8 surfaces promotes faster cell motility in the earlier growth stage. The hydrophobic nature of pristine SU-8 surfaces shows no trackable bacterial motility and 5-10 times more single cells adhered to the surface than its plasma-treated counterpart. In addition, plasma-treated SU-8 samples suppressed bacterial adhesion, with surfaces showing less than 5% coverage. These results not only showcase that SU-8 surface properties can impact the spatiotemporal bacterial behavior but also provide insights into pathogens' prominent ability to evolve and adapt to different surface properties.

Manganese silicide nanowires via metallic flux nanonucleation: growth mechanism and temperature-dependent resistivity.

Mn5Si3nanowires are believed to be the building blocks of the newest trends of flexible and stretchable devices in nanoelectronics. In this context , growing Mn5Si3nanowires, as well as characterizing their electronic transport properties provide insight into their phenomenology. In this work, we report on the growth mechanism of Mn5Si3nanowires produced by the metallic flux nanonucleation method, as well as the resistivity measurements of these nanostructures. Our calculation allows us, by using the Washburn equation for pore infiltration, to give a guess on why we obtain Mn-rich nanowires. In addition, some morphological aspects of the diameter-modulated Mn5Si3nanowires were discussed based on the classical nucleation theory. From the resistivity measurements for the smallest diameter among the nanowires, we observed a significant reduction of around 37% of the phonons characteristic temperature by fitting the Bloch-Grünesein formula with other sources of scattering. Our results lead to a better understanding on the recent metallic flux nanonucleation growth method, as well as going a step further into the electronic transport properties of the Mn5Si3nanowires.

Detection of Au+ Ions During Fluorine Gas-Assisted Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) for the Complete Elemental Characterization of Microbatteries.

Due to excellent electric conductivity and chemical inertness, Au can be used in new microdevices for energy applications, microelectronics, and biomedical solutions. However, the chemical analysis of Au-containing systems using time-of-flight secondary ion mass spectrometry (TOF-SIMS) can be difficult because of the negative ionization of Au, as most metals form positive ions, and therefore cannot be detected from the same analytical volume. In this work, we present the potential of fluorine gas coinjection for altering the polarity, from the negative to positive, of Au secondary ions generated under Ga+ beam bombardment. The importance of detecting Au+ ions and representing their spatial distribution in nanoscale was demonstrated using a novel solid electrolyte for Li-ion solid-state batteries, amorphous Li7La3Zr2O12 (aLLZO). This allowed for assessing the migration of mobile Li+ ions outside the aLLZO layer and alloying the Au layer with Li, which explained the presence of an internal electric field observed during the polarization measurements. Remarkably, during fluorine gas-assisted TOF-SIMS measurements, the trace amount of Au content (5 ppm) was detected in a Pt layer (unattainable under standard vacuum conditions). In conclusion, fluorine gas-assisted TOF-SIMS can help understanding operation mechanisms and potential degradation processes of microdevices and therefore help optimizing their functionality.

Low-temperature electronic transport of manganese silicide shell-protected single crystal nanowires for nanoelectronics applications.

Recently, core-shell nanowires have been proposed as potential electrical connectors for nanoelectronics components. A promising candidate is Mn5Si3 nanowires encapsulated in an oxide shell, due to their low reactivity and large flexibility. In this work, we investigate the use of the one-step metallic flux nanonucleation method to easily grow manganese silicide single crystal oxide-protected nanowires by performing their structural and electrical characterization. We find that the fabrication method yields a room-temperature hexagonal crystalline structure with the c-axis along the nanowire. Moreover, the obtained nanowires are metallic at low temperature and low sensitive to a strong external magnetic field. Finally, we observe an unknown electron scattering mechanism for small diameters. In conclusion, the one-step metallic flux nanonucleation method yields intermetallic nanowires suitable for both integration in flexible nanoelectronics as well as low-dimensionality transport experiments.

A novel copper precursor for electron beam induced deposition.

A fluorine free copper precursor, Cu(tbaoac)2 with the chemical sum formula CuC16O6H26 is introduced for focused electron beam induced deposition (FEBID). FEBID with 15 keV and 7 nA results in deposits with an atomic composition of Cu:O:C of approximately 1:1:2. Transmission electron microscopy proved that pure copper nanocrystals with sizes of up to around 15 nm were dispersed inside the carbonaceous matrix. Raman investigations revealed a high degree of amorphization of the carbonaceous matrix and showed hints for partial copper oxidation taking place selectively on the surfaces of the deposits. Optical transmission/reflection measurements of deposited pads showed a dielectric behavior of the material in the optical spectral range. The general behavior of the permittivity could be described by applying the Maxwell-Garnett mixing model to amorphous carbon and copper. The dielectric function measured from deposited pads was used to simulate the optical response of tip arrays fabricated out of the same precursor and showed good agreement with measurements. This paves the way for future plasmonic applications with copper-FEBID.

Direct Electron Beam Writing of Silver-Based Nanostructures.

Direct writing utilizing a focused electron beam constitutes an interesting alternative to resist-based techniques, as it allows for precise and flexible growth onto any conductive substrate in a single-step process. One important challenge, however, is the identification of appropriate precursors which allow for deposition of the material of choice, e.g., for envisaged applications in nano-optics. In this regard the coinage metal silver is of particular interest since it shows a relatively high plasma frequency and, thus, excellent plasmonic properties in the visible range. By utilizing the precursor compound AgO2Me2Bu, direct writing of silver-based nanostructures via local electron beam induced deposition could be realized for the first time. Interestingly, the silver deposition was strongly dependent on electron dose; at low doses of 30 nC/µm2 a dominant formation of pure silver crystals was observed, while at higher electron doses around 104 nC/µm2 large carbon contents were measured. A scheme for the enhanced silver deposition under low electron fluxes by an electronic activation of precursor dissociation below thermal CVD temperature is proposed and validated using material characterization techniques. Finally, the knowledge gained was employed to fabricate well-defined two-dimensional deposits with maximized silver content approaching 75 at. %, which was achieved by proper adjustment of the deposition parameters. The corresponding deposits consist of plasmonically active silver crystallites and demonstrate a pronounced Raman signal enhancement of the carbonaceous matrix.

Annealing-Based Electrical Tuning of Cobalt-Carbon Deposits Grown by Focused-Electron-Beam-Induced Deposition.

An effective postgrowth electrical tuning, via an oxygen releasing method, to enhance the content of non-noble metals in deposits directly written with gas-assisted focused-electron-beam-induced deposition (FEBID) is presented. It represents a novel and reproducible method for improving the electrical transport properties of Co-C deposits. The metal content and electrical properties of Co-C-O nanodeposits obtained by electron-induced dissociation of volatile Co2(CO)8 precursor adsorbate molecules were reproducibly tuned by applying postgrowth annealing processes at 100 °C, 200 °C, and 300 °C under high-vacuum for 10 min. Advanced thin film EDX analysis showed that during the annealing process predominantly oxygen is released from the Co-C-O deposits, yielding an atomic ratio of Co:C:O = 100:16:1 (85:14:1) with respect to the atomic composition of as-written Co:C:O = 100:21:28 (67:14:19). In-depth Raman analysis suggests that the amorphous carbon contained in the as-written deposit turns into graphite nanocrystals with size of about 22.4 nm with annealing temperature. Remarkably, these microstructural changes allow for tuning of the electrical resistivity of the deposits over 3 orders of magnitude from 26 mΩ cm down to 26 µΩ cm, achieving a residual resistivity of ρ2K/ρ300 K = 0.56, close to the value of 0.53 for pure Co films with similar dimensions, making it especially interesting and advantageous over the numerous works already published for applications such as advanced scanning-probe systems, magnetic memory, storage, and ferroelectric tunnel junction memristors, as the graphitic matrix protects the cobalt from being oxidized under an ambient atmosphere.