Direct-Write of Nanoscale Domains with Tunable Metamagnetic Order in FeRh Thin Films.

We have directly written nanoscale patterns of magnetic ordering in FeRh films using focused helium-ion beam irradiation. By varying the dose, we pattern arrays with metamagnetic transition temperatures that range from the as-grown film temperature to below room temperature. We employ transmission electron microscopy, X-ray diffraction, and temperature-dependent transport measurements to characterize the as-grown film, and magneto-optic Kerr effect imaging to quantify the He+ irradiation-induced changes to the magnetic order. Moreover, we demonstrate temperature-dependent optical microscopy and conductive atomic force microscopy as indirect probes of the metamagnetic transition that are sensitive to the differences in dielectric properties and electrical conductivity, respectively, of FeRh in the antiferromagnetic (AF) and ferromagnetic (FM) states. Using density functional theory, we quantify strain- and defect-induced changes in spin-flip energy to understand their influence on the metamagnetic transition temperature. This work holds promise for in-plane AF-FM spintronic devices, by reducing the need for multiple patterning steps or different materials, and potentially eliminating interfacial polarization losses due to cross material interfacial spin scattering.

Binary Superlattices of Infrared Plasmonic and Excitonic Nanocrystals.

Self-assembled superlattices of nanocrystals offer exceptional control over the coupling between nanocrystals, similar to how solid-state crystals tailor the bonding between atoms. By assembling nanocrystals of different properties (e.g., plasmonic, excitonic, dielectric, or magnetic), we can form a wealth of binary superlattice metamaterials with new functionalities. Here, we introduce infrared plasmonic Cu2-xS nanocrystals to the limited library of materials that have been successfully incorporated into binary superlattices. We are the first to create a variety of binary superlattices with large excitonic (PbS) nanocrystals and small plasmonic (Cu2-xS) nanocrystals, both resonant in the infrared. Then, by controlling the surface chemistry of large Cu2-xS nanocrystals, we produced structurally analogous superlattices of large Cu2-xS and small PbS nanocrystals. Transmission electron microscopy (TEM) and grazing-incidence small-angle X-ray scattering (GISAXS) were used to characterize both types of superlattices. Furthermore, our unique surface modification of the large Cu2-xS nanocrystals also prevented them from chemically quenching the photoluminescence of the PbS nanocrystals, which occurred when the PbS nanocrystals were mixed with unmodified Cu2-xS nanocrystals. These synthetic achievements create a set of binary superlattices that can be used to understand how infrared plasmonic and excitonic nanocrystals couple in a variety of symmetries and stoichiometries.

Below the Hall-Petch Limit in Nanocrystalline Ceramics.

Reducing the grain size of metals and ceramics can significantly increase strength and hardness, a phenomenon described by the Hall-Petch relationship. The many studies on the Hall-Petch relationship in metals reveal that when the grain size is reduced to tens of nanometers, this relationship breaks down. However, experimental data for nanocrystalline ceramics are scarce, and the existence of a breakdown is controversial. Here we show the Hall-Petch breakdown in nanocrystalline ceramics by performing indentation studies on fully dense nanocrystalline ceramics fabricated with grain sizes ranging from 3.6 to 37.5 nm. A maximum hardness occurs at a grain size of 18.4 nm, and a negative (or inverse) Hall-Petch relationship reduces the hardness as the grain size is decreased to around 5 nm. At the smallest grain sizes, the hardness plateaus and becomes insensitive to grain size change. Strain rate studies show that the primary mechanism behind the breakdown, negative, and plateau behavior is not diffusion-based. We find that a decrease in density and an increase in dissipative energy below the breakdown correlate with increasing grain boundary volume fraction as the grain size is reduced. The behavior below the breakdown is consistent with structural changes, such as increasing triple-junction volume fraction. Grain- and indent-size-dependent fracture behavior further supports local structural changes that corroborate current theories of nanocrack formation at triple junctions. The synergistic grain size dependencies of hardness, elasticity, energy dissipation, and nanostructure of nanocrystalline ceramics point to an opportunity to use the grain size to tune the strength and dissipative properties.

Macroporous silica for concentration of nitroenergetic targets.

Hierarchical organosilicate sorbents were synthesized which possess structure on two length scales: macropores of approximately 1microm lined by mesopores (35-45A). The incorporation of macropores provides enhanced flow-through characteristics over purely mesoporous materials, thereby reducing back pressure when used in column formats. Materials of this type with varied surface groups were applied to the adsorption of 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) in both batch and column formats. The results presented here demonstrate the potential of these materials for application as solid phase extraction materials for the pre-concentration of nitroenergetic targets from aqueous solutions. The structural and binding characteristics of the materials have been evaluated and preliminary data on the impact of complex matrices is provided.

Imprinted nanoporous organosilicas for selective adsorption of nitroenergetic targets.

Periodic mesoporous organosilicas incorporating diethylbenzene bridges in their pore walls were applied for the adsorption of nitroenegetic targets from aqueous solution. The materials were synthesized by co-condensing 1,4-bis(trimethoxysilylethyl)benzene (DEB) with 1,2-bis(trimethoxysilyl)ethane to improve structural characteristics. Molecular imprinting of the pore surfaces was employed through the use of a novel target-like surfactant to further enhance selectivity for targets of interest (tri- and dinitrotoluenes) over targets of similar structure ( p-cresol and p-nitrophenol). The headgroup of the commonly used alkylene oxide surfactant Brij76 was modified by esterification with 3,5-dinitrobenzoyl chloride. This provided a target analogue which was readily miscible with the Brij76 surfactant micelles used to direct material mesopore structures. The impact of variations in precursor ratios and amounts of imprint molecule was evaluated. The use of 12.5% of the modified Brij surfactant with a co-condensate employing 30% DEB was found to provide the best compromise between total capacity and selectivity for nitroenergetic targets.

Responsivity optimization and stabilization in electro-optic field sensors.

Electro-optic (EO) modulation devices, which utilize an external electric field to modulate a beam of optical radiation, are strongly affected by parasitic effects, which change the polarization state of the optical beam. As a result, very small changes in the birefringence or optical path length within the EO material can result in very large fluctuations of the amplitude and phase of the optical modulation signal. A method of actively analyzing the modulated beam is described and demonstrated, which eliminates these fluctuations and keeps the modulation device stably operating at its peak responsivity. Applications to electric field detection and measurements are discussed.

Chitosan cross-linking with a water-soluble, blocked diisocyanate. 1. Solid state.

The present investigation focuses on the synthesis and application of a cross-linking agent that is compatible with the solubility characteristics of chitosan. A water-soluble, blocked-diisocyanate was prepared as a bisulfite adduct to 1,6-hexamethylene diisocyanate, which proved to be stable for several weeks in aqueous, acidic chitosan solutions at room temperature. Thermal cross-linking of chitosan as cast, dried films was investigated by varying the NCO/NH(2) ratio from 0.0 to 1.2. Spectroscopic (IR), thermal (TGA), swelling, and structural (WAXD) studies indicated that chitosan was cross-linked in a concentration-dependent manner under mild thermal conditions: 60 degrees C for 24 h. Cross-linking inefficiency was concluded to be due to lack of mobility of the reacting species in the solid state. In a preliminary study, the enzymatic degradation with Chitinase (E. C. 3.2.1.14) from Streptomyces griseus was found to be the greatest for non-crosslinked chitosan, followed by chitin, and then by cross-linked samples.