In vitro evaluation of the color stability and surface roughness of a new composite flow.

Background: The aim of this study was to evaluate the color stability and the surface roughness of a bulk-fill composite flow (SDR® Plus) by comparison to an ORMOCER-based composite (Ceram.x® Universal SphereTEC™) in order to confirm the validity of using SDR® Plus in the anterior region and to allow the prediction of its long-term results. Material and Methods: 35 composite specimens of the same shade (A2), thickness (2mm) and shape of both types of composite were prepared. The specimens were cured and polished according to the manufacturer's instructions. The initial shade of the specimens was measured using a calibrated EasyShade spectrophotometer. The initial surface roughness of the specimens was measured by AFM. Afterwards, the specimens were subjected to an accelerated aging procedure through thermo-cycling, a coffee stain challenge and brushing to simulate two years in the oral environment. The shade and surface roughness of the specimens were measured again after the accelerated aging procedure. Results: The mean ΔE was significantly larger than 3.368 in Ceram.x® group (-p-value<0.001) and SDR® Plus group (-p-value<0.001). The mean surface roughness has significantly increased for both groups after aging with no significant difference between the two groups. It however remained clinically acceptable. Conclusions: SDR® Plus and Ceram.x® showed similar surface roughness when subjected to the same testing conditions. Concerning the color stability, both composites displayed noticeable discoloration, with higher ΔE values registered for Ceram.x®. Key words:Composite resins, spectrophotometry, atomic force microscopy, dental material, resin-based material.

Quantitative Measurements of the Depth of Enamel Demineralization before and after Bleach: An In Vitro Study.

Objective: This study is aimed at determining two main points. First, if the Canary System™ (CS), initially used to assess caries, can measure a decalcification depth of bleached enamel quantitatively, and second, whether or not whitening has a harmful effect on enamel. This device can be considered a useful tool in the clinical assessment of the progression of demineralization after bleaching. Materials and Methods: This study collected sixty human premolars that are in a good state recently extracted for orthodontic reason. To properly disinfect and preserve the premolars, they were stored in a saline solution and later in distilled water for a period of two weeks to allow the premolars to rehydrate. Later, 24 hours before the experiment, the premolars were introduced into a solution of artificial saliva to acquire back their minerals. The mineral content of the teeth was measured by the Canary System™ before bleaching. The teeth were bleached with 30% hydrogen peroxide (fläsh HP 30%), 30 min per week and for 3 consecutive weeks to simulate the conditions of strong bleaching in the clinic. The extent of demineralized enamel was measured by the Canary System™ at three points on the enamel surface of each tooth. The data were averaged for each application of the bleaching product. The demineralization extent of the teeth was measured by the Canary System™ before and after bleaching. The significance level was set at 0.05, and SPSS version 26 was used. The data were analyzed by using Wilcoxon's and Student's tests. Results: Mineral loss occurred after the first bleaching session; the Canary System™ detected a decalcification in the first bleaching session (532 ± 322 µm) compared to the other sessions (p ≤ 0.05), while no significant change was detected between the second and the third sessions (p > 0.05). Conclusion: Based on the findings of the present study, under in vitro conditions, it was possible to measure the demineralization extent of bleached enamel with the Canary System™.

Evidence-Based Bibliometric Analysis of Research on Silver Diamine Fluoride Use in Dentistry.

BACKGROUND: This bibliometric analysis is aimed at reviewing the research pattern on the use of silver diamine fluoride (SDF) in dentistry using various citation metrics. METHODS: A well-curated search was conducted on Elsevier's Scopus database for the relevant literature on SDF published between 1969 and 2021. Bibliographic information such as information related to citations, bibliographic data, abstracts, keywords, and other relevant information was extracted using different combinations of keywords ("silver diamine fluoride" OR "Silver Diamine Fluorides" OR "Diamine Fluoride" OR "Silver Fluoride"). Analysis and visualization of the selected documents and related data were performed using various tools and software including MS Excel, MS Access, Bibexcel, VOS viewer, Biblioshiny, and Gephi. VOS Viewer was utilized for the Graph Modeling Language (GML) to generate graphical representations of the data. Furthermore, network graphs were generated to assess the various associations between research themes, countries, organizations, authors, journals, and citations. RESULTS: The initial search yielded 662 documents, of which 410 were chosen for analysis. 252 records were deemed irrelevant. The chosen records consisted of journal articles (n = 351), conference papers (n = 14), book chapters (n = 1), and review articles (n = 44). The results showed that there was an upward trend in the research on SDF, and a substantial increase was observed in the citation index after 2014. Researchers from the United States of America, Hong Kong, and Japan were the top contributors, with organizations and authors from the Faculty of Dentistry, University of Hong Kong, leading the way in citations and productivity. CONCLUSION: The bibliometric analysis provides valuable information regarding the total number of publications on SDF and their citation details. It also identifies the leading countries and organizations involved in the research on SDF and provides a comprehensive analysis of the research trends related to SDF.

A Two-Year Comparative Evaluation of Clinical Performance of a Nanohybrid Composite Resin to a Flowable Composite Resin.

OBJECTIVE: This prospective in vivo study aimed to compare the clinical behavior of a flowable composite resin (Genial Universal Flo, GC) and a nanohybrid universal composite resin (Tetric Evo Ceram, Ivoclar Vivadent) used in Class I and II direct esthetic restorations in posterior teeth. METHODS: A total of 108 Class I and II direct restorations were performed in patients aged between 20 and 60 years. The originality of this study lies in the fact that both materials were placed in pairs, in the same clinical environment (i.e., the same patient and the same type of tooth). The evaluations were performed now of restoration and after 2-weeks, 6-, 12-, and 24-months intervals using clinical examination, clinical photographs, and radiological examination, according to modified USPHS criteria. Statistical analysis was performed using the Fisher exact test and chi-square analysis. RESULTS: At baseline, the universal composite resin showed better esthetic properties such as surface luster, surface staining marginal staining. Both materials regressed significantly over time with no significant difference between groups. CONCLUSIONS: Both flowable and nanohybrid composite resins exhibit acceptable clinical performance. The present 24 months of evaluation of different composites showed that the G-ænial Universal Flo could be an effective esthetic material for posterior restoration. No significant difference between both materials over time concerning surface luster, surface staining, and marginal staining.

Highly Segregated Biocomposite Membrane as a Functionally Graded Template for Periodontal Tissue Regeneration.

Guided tissue regeneration (GTR) membranes are used for treating chronic periodontal lesions with the aim of regenerating lost periodontal attachment. Spatially designed functionally graded bioactive membranes with surface core layers have been proposed as the next generation of GTR membranes. Composite formulations of biopolymer and bioceramic have the potential to meet these criteria. Chitosan has emerged as a well-known biopolymer for use in tissue engineering applications due to its properties of degradation, cytotoxicity and antimicrobial nature. Hydroxyapatite is an essential component of the mineral phase of bone. This study developed a GTR membrane with an ideal chitosan to hydroxyapatite ratio with adequate molecular weight. Membranes were fabricated using solvent casting with low and medium molecular weights of chitosan. They were rigorously characterised with scanning electron microscopy, Fourier transform infrared spectroscopy in conjunction with photoacoustic sampling accessory (FTIR-PAS), swelling ratio, degradation profile, mechanical tensile testing and cytotoxicity using human osteosarcoma and mesenchymal progenitor cells. Scanning electron microscopy showed two different features with 70% HA at the bottom surface packed tightly together, with high distinction of CH from HA. FTIR showed distinct chitosan dominance on top and hydroxyapatite on the bottom surface. Membranes with medium molecular weight showed higher swelling and longer degradation profile as compared to low molecular weight. Cytotoxicity results indicated that the low molecular weight membrane with 30% chitosan and 70% hydroxyapatite showed higher viability with time. Results suggest that this highly segregated bilayer membrane shows promising potential to be adapted as a surface layer whilst constructing a functionally graded GTR membrane on its own and for other biomedical applications.

Antimicrobial and self-crosslinking potential of experimentally developed dioctadecyldimethyl ammonium bromide and riboflavin dentin adhesive.

The aim of the study is to investigate a new formulation, based on dioctadecyldimethyl ammonium-bromide (QA) and riboflavin (RF), combining antimicrobial activities and protease inhibitory properties with collagen crosslinking without interference to bonding capabilities in a rabbit model. Quaternary ammonium riboflavin (QARF) experimental adhesives modified with dioctadecyldimethyl ammonium-bromide and riboflavin were bonded (0.5/1.0/2.0%) to rabbit dentin to investigate for pulpal-histology, interfacial-morphology, transmission electron microscopy, mechanical properties, collagen crosslinking, micro-Raman analysis, antimicrobial, and anti-protease activities. Collagen type-I molecules were generated using molecular-docking. Odontoblasts appeared with normal histology, were seen in controls with no inflammatory cells detected in 0.5% specimens at day 7 and mild inflammatory response at day 30. In QARF 2.0%, inflammatory cells were not detected at day 7 and 30 (p < .05). Dentinal tubules are seen with intact collagen surface in 1% specimens. Resin penetrated inside 1% adhesive specimens with few irregularly funnel-shaped tags. Transmission electron microscopy showed thinner collagen in all specimens except 1% QARF specimens. Biofilms were influenced by QARF adhesives. Elastic moduli were significantly higher in 1.0% and 2.0% QARF adhesive specimens with a significant increase in total crosslinks. Stable amide groups with anti-protease activity was observed in QARF groups. Charged residues were seen in the triple helix hCOL3A1, Gly489-Gly510 after stabilisation with formulation. The 1% QARF modified adhesives improved biochemical and biomechanical properties of rabbit dentin.

Oral Manifestations of Rett Syndrome-A Systematic Review.

Rett Syndrome is an x linked developmental disorder which becomes apparent in females after 6 to 18 months of age. It leads to severe impairments including loss of speech, loss of hand movements/manual dexterity, characteristic hand movements such as hang wringing and intellectual disability/learning problems. This systematic review was carried out to identify the dental manifestation of Rett syndrome and to shed light on treatment options available for oral health problems associated with Rett syndrome. A systematic literature search was conducted on the PubMed, Scopus, Biomed, Web of Science, Embase, Google Scholars, Cochrane and CINAHL using the following entries: Rett syndrome (n = 3790), Oral health and Rett syndrome (n = 17), dental health of Rett syndrome patients (n = 13), and the MeSH terms listed below: Rett syndrome and Oral Health (n = 17), Rett syndrome and dentistry (n = 29). The final review included 22 search articles. The most common oral findings was bruxism. Masseteric hypertrophy was also reported. Anterior open bite and non-physiological tooth wear was observed. Other oral manifestations of Rett syndrome included mouth breathing, tongue thrusting, digit/thumb sucking, high arch palate. Increased awareness and dental education amongst dentists and assistants regarding the dental manifestations of Rett syndrome and similar neurodevelopmental disorders is required to improve the level of care and empathy they can provide to these differently able patients. Research on dental aspects of Rett is scarce and this remains a neglected topic.

Correction to: the Effect of Cross-Linking Efficiency of Drug-Loaded Novel Freeze Gelated Chitosan Templates for Periodontal Tissue Regeneration.

The correct spelling of the second author's name is Liebert Parreiras Nogueira.

An Evidence-Based Update on the Molecular Mechanisms Underlying Periodontal Diseases.

Several investigators have reported about the intricate molecular mechanism underlying periodontal diseases (PD). Nevertheless, the role of specific genes, cells, or cellular mechanisms involved in the pathogenesis of periodontitis are still unclear. Although periodontitis is one of the most prevalent oral diseases globally, there are no pre-diagnostic markers or therapeutic targets available for such inflammatory lesions. A pivotal role is played by pro- and anti-inflammatory markers in modulating pathophysiological and physiological processes in repairing damaged tissues. In addition, effects on osteoimmunology is ever evolving due to the ongoing research in understanding the molecular mechanism lying beneath periodontal diseases. The aim of the current review is to deliver an evidence-based update on the molecular mechanism of periodontitis with a particular focus on recent developments. Reports regarding the molecular mechanism of these diseases have revealed unforeseen results indicative of the fact that significant advances have been made to the periodontal medicine over the past decade. There is integrated hypothesis-driven research going on. Although a wide picture of association of periodontal diseases with immune response has been further clarified with present ongoing research, small parts of the puzzle remain a mystery and require further investigations.

The Effect of Cross-linking Efficiency of Drug-Loaded Novel Freeze Gelated Chitosan Templates for Periodontal Tissue Regeneration.

Innovative strategies for periodontal regeneration have been the focus of research clusters across the globe for decades. In order to overcome the drawbacks of currently available options, investigators have suggested a novel concept of functionally graded membrane (FGM) templates with different structural and morphological gradients. Chitosan (CH) has been used in the past for similar purpose. However, the composite formulation of composite and tetracycline when cross-linked with glutaraldehyde have received little attention. Therefore, the purpose of the study was to investigate the drug loading and release characteristics of novel freeze gelated chitosan templates at different percentages of glutaraldehyde. These were cross-linked with 0.1 and 1% glutaraldehyde and loaded with doxycycline hyclate. The electron micrographs depicted porous morphology of neat templates. After cross-linking, these templates showed compressed ultrastructures. Computerized tomography analysis showed that the templates had 88 to 92% porosity with average pore diameter decreased from 78 to 44.9 µm with increasing concentration. Fourier transform infrared spectroscopy showed alterations in the glycosidic segment of chitosan fingerprint region which after drug loading showed a dominant doxycycline spectral composite profile. Interestingly, swelling profile was not affected by cross-linking either at 0.1 and 1% glutaraldehyde and template showed a swelling ratio of 80%, which gained equilibrium after 15 min. The drug release pattern also showed a 40 µg/mL of release after 24 h. These doxycycline-loaded templates show their tendency to be used in a functionally graded membrane facing the defect site.

Open-Healing Socket Preservation with a Novel Dense Polytetrafluoroethylene (dPTFE) Membrane: A Retrospective Clinical Study.

Background and objectives: Non-resorbable dense polytetrafluoroethylene (dPTFE) membranes are widely used for regeneration procedures, alone or in combination with particulate materials. The aim of this work was to examine the efficacy of a newly developed dPTFE membrane in the management of extraction socket healing. Materials and Methods: The extraction premolar sockets of 44 patients (20 men and 24 women) were preserved. One group received prosthetic rehabilitation with a fixed partial denture (FPD) (PROS group, N = 19) and a second group received immediate implant placement (IMPL group, N = 25). The PROS group sockets were augmented with a bovine derived xenograft and covered with a newly developed dPTFE membrane prior to FPD rehabilitation. Results: In the IMPL group, socket preservation was combined with immediate implant placement. Before (T0) and 6 months after surgery (T1), horizontal and vertical dimensions were measured with customized stents. No significant differences in alveolar bone loss from T0 to T1 were observed between the PROS and IMPL groups in the horizontal dimension for any tooth type. There was a significant difference in alveolar bone loss from T0 to T1 between the two groups for only single-rooted maxillary premolars in the vertical dimension. Conclusions: The use of the examined new dPTFE membrane consistently led to the preservation of hard tissue in the extraction sites.

Anxiety, Practice Modification, and Economic Impact Among Iraqi Dentists During the COVID-19 Outbreak.

Objectives: As health care workers on the front line during the coronavirus (COVID-19) pandemic, dental practitioners are amongst those at risk due to their close contact with potentially infected individuals. The aim of the current study was to assess the anxiety, awareness practice modification, and economic impact amongst Iraqi dentists whilst working during the outbreak. Methods: This study was performed using an online survey questionnaire with aid of Google forms from 2nd to 23rd July 2020. A total of 484 clinicians responded. The questionnaire was composed of open end, closed end, and Likert five-point scale questions to assess anxiety, awareness and financial impact of COVID-19 on dentists. Mann-Whitney test was used to compare two groups, whilst Kruskal-Wallis was performed by post-hoc test for multigroup comparisons. Results: The mean age of participants was 36.51 ± 9.164 years and the majority (75.2%) of these were graduate dentists only. More than 80% of participants reported anxiety of catching COVID-19. The recorded anxiety level was higher amongst younger dentists and females. Awareness and practice levels among these dentists of precautions and infection-control measures associated with COVID-19 (94%) was found to be high and to be statistically significantly affected by age, qualification and designation (except GP vs. Specialist). With respect to the economic impact, about 75% of practitioners, regardless of demographical variables, reported that their income had declined by about 50%. Conclusions: The investigation provides clear insights into the anxiety, practice modifications and economic impact on dentists working in Iraq. Although there is a high level of knowledge and awareness of required practice regarding the COVID-19 outbreak among Iraqi dentists, they also reported a high level of anxiety.