Inhibition of Lonp1 induces mitochondrial remodeling and autophagy suppression in cervical cancer cells.

Lon protease 1(Lonp1) is an ATP-dependent protease located in the mitochondrial matrix and plays a crucial role in preserving normal mitochondrial function. Lonp1 overexpression is associated with tumorigenesis in various cancer types, including cervical cancer. In the present study, we show that the Lonp1 content is elevated in cervical cancer tissues compared to cervical paracancerous tissues. Conversely, Lonp1 knockdown suppresses cervical cancer cell proliferation, migration and invasion but promotes apoptosis. Mechanistically, Lonp1 knockdown decreases area of mitochondrial networks and induces mitochondrial depolarization. Furthermore, Lonp1 inhibition reduces the level of LC3-II/I, PINK1 and Parkin, but promotes the level of p62. Collectively, our study suggests that the anti-cancer effect caused by Lonp1 downregulation likely contributes to mitochondrial remodeling and suppression of autophagy and mitophagy.

Kinesin Family Member C1 (KIFC1) Accelerates Proliferation and Invasion of Endometrial Cancer Cells Through Modulating the PI3K/AKT Signaling Pathway.

Endometrial cancer (EC) is one of the most common cancers among women worldwide. Kinesin family member C1 (KIFC1) has been demonstrated to play crucial roles in various tumors. However, the function of KIFC1 in EC remains to be revealed. In this study, upregulation of KIFC1 expression in human EC tissues was found from analysis on data from The Cancer Genome Atlas (TCGA), and positively correlated with short survival outcome of EC patients. In addition, the mRNA and protein levels of KIFC1 were confirmed to be up-regulated in EC cells (Ishikawa, HEC-1B, HEC-1A and KLE) compared to human normal endometrial stromal cells (hESCs) by quantitative real time PCR and western blot. In vitro functional experiments showed that overexpression of KIFC1 promoted proliferation, migration and invasion of EC cells, while KIFC1 depletion showed the opposite results. Moreover, KIFC1 knockdown suppressed tumor growth in mice. Further mechanism analysis showed that KIFC1 participated in the regulation of EC progression through regulating the PI3K/AKT signaling pathway. Collectively, KIFC1 promoted proliferation and invasion through modulating PI3K/AKT signaling pathway in EC, implying that KIFC1 might provide a promising therapeutic target for the therapy of EC.

Screening a Phage Display Library for Two Novel OmpU-Binding Peptides with Adhesion Antagonistic Activity against Vibrio mimicus.

Vibrio mimicus is a pathogen that causes ascites disease in fish. We have previously demonstrated that the outer membrane protein U (OmpU) is an important adhesin in V. mimicus. Here eight specific OmpU-binding phage clones, which presented three different OmpU-binding peptides (designated P1, P2, P3), were screened from a commercially available phage displayed 12-mer peptide library using rOmpU protein as target. Then, synthetic OmpU-binding peptides were measured for their adhesion antagonistic activity and binding affinity via adhesion inhibition test and non-competitive ELISA, respectively. The results showed that after co-incubated with the mixture of rOmpU and P3, visible green fluorescence could be observed on the epithelioma papulosum cyprinidi (EPC) cells surface; while the EPC cells co-incubated with the mixture of rOmpU and P1/P2 exhibited little green fluorescence. The average adhesion number of V. mimicus 04-14 isolate before and after treatment with peptide was 21.4 ± 1.5, 20.8 ± 0.8 (irrelevant peptide), 20.2 ± 0.5 (P3), 5.1 ± 0.7 (P1) and 3.4 ± 0.8 (P2), respectively. There was a significant decrease in the adhesive level of 04-14 isolate treated with P1/ P2 compared to the untreated isolate (p<0.01). The affinity constants of P1 and P2 were (6.17 ± 0.19) × 108 L/mol and (1.24 ± 0.56) × 109 L/mol, respectively. Furthermore, protective effects of P1 and P2 on grass carps challenged with V. mimicus were preliminary detected. It was found there was delayed death of fish in the groups treated with P1/P2, and the survival rate of challenged fish improved with the increase of the dose of adhesion antagonistic peptide. Taken together, two novel OmpU-binding peptides, which possessed adhesion antagonistic activity, high affinity and a certain degree of antibacterial activity against V. mimicus, were screened and identified.

High-surface area mesoporous Pt/TiO2 hollow chains for efficient formaldehyde decomposition at ambient temperature.

Room-temperature catalytic decomposition of formaldehyde (HCHO) is considered as one of the most main methods for the removal of indoor HCHO due to its facile reaction conditions. Herein, high-surface area mesoporous Pt/TiO2 hollow chains were synthesized in high yield by using a simple microwave-hydrothermal route, followed by a combined NaOH-assisted NaBH4-reduction deposition of Pt nanoparticles on the as-obtained TiO2 surface. The catalytic activity for HCHO decomposition was evaluated at room temperature. The prepared Pt/TiO2 hollow chains with an optimal Pt loading of 0.5 wt.% exhibited high catalytic activity and recyclability. The apparent reaction rate constant of HCHO oxidation over this catalyst was approximately 1.42×10(-3) ppm(-1) min(-1), exceeding that of the commercial Degussa P25 TiO2 with equal Pt content (k=5.36×10(-4) ppm(-1) min(-1)) by a factor of approximately 2.65. The high catalytic activity of the Pt/TiO2 hollow chains could be mainly attributed to the hollow chain-like structure, high specific surface area, numerous mesopores, and high pore volume of TiO2 support. Consequently, the catalysts exhibited high adsorption capacity for HCHO, fast diffusion and transport of gas molecules, and good contact between gases and active sites. These characteristics enhanced the catalytic activity.

Fabrication of NiS modified CdS nanorod p-n junction photocatalysts with enhanced visible-light photocatalytic H2-production activity.

Production of hydrogen from photocatalytic water splitting has become an attractive research area due to the possibility of converting solar energy into green chemical energy. In this study, novel NiS nanoparticle (NP) modified CdS nanorod (NR) p-n junction photocatalysts were prepared by a simple two-step hydrothermal method. Even without the Pt co-catalyst, the as-prepared NiS NP-CdS NR samples exhibited enhanced visible-light photocatalytic activity and good stability for H2-production. The optimal NiS loading content was determined to be 5 mol%, and the corresponding H2-production rate reached 1131 µmol h(-1) g(-1), which is even higher than that of the optimized Pt-CdS NRs. It is believed that the assembly of p-type NiS NPs on the surface of n-type CdS NRs could form a large number of p-n junctions, which could effectively reduce the recombination rates of electrons and holes, thus greatly enhancing the photocatalytic activity. This work not only shows a possibility for the utilization of low cost NiS nanoparticles as a substitute for noble metals (such as Pt) in the photocatalytic H2-production but also provides a new insight into the design and fabrication of other new p-n junction photocatalysts for enhancing H2-production activity.

Preparation and enhanced visible-light photocatalytic H2-production activity of CdS-sensitized Pt/TiO2 nanosheets with exposed (001) facets.

CdS-sensitized Pt/TiO(2) nanosheets with exposed (001) facets were prepared by hydrothermal treatment of a Ti(OC(4)H(9))(4)-HF-H(2)O mixed solution followed by photochemical reduction deposition of Pt nanoparticles (NPs) on TiO(2) nanosheets (TiO(2) NSs) and chemical bath deposition of CdS NPs on Pt/TiO(2) NSs, successively. The UV and visible-light driven photocatalytic activity of the as-prepared samples was evaluated by photocatalytic H(2) production from lactic acid aqueous solution under UV and visible-light (λ ≥ 420 nm) irradiation. It was shown that no photocatalytic H(2)-production activity was observed on the pure TiO(2) NSs under UV and/or visible-light irradiation. Deposition of CdS NPs on Pt/TiO(2) NSs caused significant enhancement of the UV and visible-light photocatalytic H(2)-production rates. The morphology of TiO(2) particles had also significant influence on the visible-light H(2)-production activity. Among TiO(2) NSs, P25 and the NPs studied, the CdS-sensitized Pt/TiO(2) NSs show the highest photocatalytic activity (13.9% apparent quantum efficiency obtained at 420 nm), exceeding that of CdS-sensitized Pt/P25 by 10.3% and that of Pt/NPs by 1.21%, which can be attributed to the combined effect of several factors including the presence of exposed (001) facets, surface fluorination and high specific surface area. After many replication experiments of the photocatalytic hydrogen production in the presence of lactic acid, the CdS-sensitized Pt/TiO(2) NSs did not show great loss in the photocatalytic activity, confirming that the CdS/Pt/TiO(2) NSs system is stable and not photocorroded.

Template-free fabrication of hierarchically flower-like tungsten trioxide assemblies with enhanced visible-light-driven photocatalytic activity.

Hierarchically flower-like tungsten trioxide assemblies were fabricated on a large scale by a simple hydrothermal treatment of sodium tungstate in aqueous solution of nitric acid. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy and N(2) adsorption-desorption measurements. The photocatalytic activity was evaluated by photocatalytic decolorization of rhodamine B aqueous solution under visible-light irradiation. It was found that the three-dimensional tungsten trioxide assemblies were constructed from two-dimensional layers, which were further composed of a large number of interconnected lathy nanoplates with different sizes. Such flower-like assemblies exhibited hierarchically porous structure and higher visible-light photocatalytic activity than the samples without such hierarchical structures due to their specific hierarchical pores that served as the transport paths for light and reactants. After five recycles for the photodegradation of RhB, the catalyst did not exhibit any great loss in activity, confirming hierarchically flower-like tungsten trioxide was stability and not photocorroded. This study may provide new insight into environmentally benign preparation and design of novel photocatalytic materials and enhancement of photocatalytic activity.

Effect of calcination temperatures on microstructures and photocatalytic activity of tungsten trioxide hollow microspheres.

Tungsten trioxide hollow microspheres were prepared by immersing SrWO4 microspheres in a concentrated HNO3 solution, and then calcined at different temperatures. The prepared tungsten oxide samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectra, differential thermal analysis-thermogravimetry, UV-visible spectrophotometry, scanning electron microscopy, N2 adsorption/desorption measurements. The photocatalytic activity of the samples was evaluated by photocatalytic decolorization of rhodamine B aqueous solution under visible-light irradiation. It was found that with increasing calcination temperatures, the average crystallite size and average pore size increased, on the contrary, Brunauer-Emmett-Teller-specific surface areas decreased. However, pore volume and porosity increased firstly, and then decreased. Increasing calcination temperatures resulted in the changes of surface morphology of hollow microspheres. The un-calcined and 300 degrees C-calcined samples showed higher photocatalytic activity than other samples. At 400 degrees C, the photocatalytic activity decreased greatly due to the decrease of specific surface areas. At 500 degrees C, the photocatalytic activity of the samples increased again due to the junction effect of two phases.