Strength-Plasticity Relationship and Intragranular Nanophase Distribution of Hybrid (GNS + SiCnp)/Al Composites Based on Heat Treatment.

The distribution of reinforcements and interfacial bonding state with the metal matrix are crucial factors in achieving excellent comprehensive mechanical properties for aluminum (Al) matrix composites. Normally, after heat treatment, graphene nanosheets (GNSs)/Al composites experience a significant loss of strength. Here, better performance of GNS/Al was explored with a hybrid strategy by introducing 0.9 vol.% silicon carbide nanoparticles (SiCnp) into the composite. Pre-ball milling of Al powders and 0.9 vol.% SiCnp gained Al flakes that provided a large dispersion area for 3.0 vol.% GNS during the shift speed ball milling process, leading to uniformly dispersed GNS for both as-sintered and as-extruded (0.9 vol.% SiCnp + 3.0 vol.% GNS)/Al. High-temperature heat treatment at 600 °C for 60 min was performed on the as-extruded composite, giving rise to intragranular distribution of SiCnp due to recrystallization and grain growth of the Al matrix. Meanwhile, nanoscale Al4C3, which can act as an additional reinforcing nanoparticle, was generated because of an appropriate interfacial reaction between GNS and Al. The intragranular distribution of both nanoparticles improves the Al matrix continuity of composites and plays a key role in ensuring the plasticity of composites. As a result, the work hardening ability of the heat-treated hybrid (0.9 vol.% SiCnp + 3.0 vol.% GNS)/Al composite was well improved, and the tensile elongation increased by 42.7% with little loss of the strength. The present work provides a new strategy in achieving coordination on strength-plasticity of Al matrix composites.

Effect of Particle Strength on SiCp/Al Composite Properties with Network Architecture Design.

Recent works have experimentally proven that metal matrix composites (MMCs) with network architecture present improved strength-ductility match. It is envisaged that the performance of architecturally designed composites is particularly sensitive to reinforcement strength. Here, reinforcing particles with various fracture strengths were introduced in numerical models of composites with network particle distribution. The results revealed that a low particle strength (1 GPa) led to early-stage failure and brittle fracture. Nevertheless, a high particle strength (5 GPa) delayed the failure behavior and led to ductile fracture at the SiC/Al-Al macro-interface areas. Therefore, the ultimate tensile strengths (UTS) of the network SiC/Al composites increased from 290 to 385 MPa, with rising particle strength from 1 to 5 GPa. Based on the composite property, different particle fracture threshold strengths existed for homogeneous (~2.7 GPa) and network (~3.7 GPa) composites. The higher threshold strength in network composites was related to the increased stress concentration induced by network architecture. Unfortunately, the real fracture strength of the commercial SiC particle is 1-2 GPa, implying that it is possible to select a high-strength particle necessary for efficient network architecture design.

Large Cyclability of Elastocaloric Effect in Highly Porous Ni-Fe-Ga Foams.

Solid-state refrigeration based on elastocaloric materials (eCMs) requires reversibility and repeatability. However, the intrinsic intergranular brittleness of ferromagnetic shape memory alloys (FMSMAs) limits fatigue life and, thus, is the crucial bottleneck for its industrial applications. Significant cyclic stability of elastocaloric effects (eCE) via 53% porosity in Ni-Fe-Ga FMSMA has already been proven. Here, Ni-Fe-Ga foams (single-/hierarchical pores) with high porosity of 64% and 73% via tailoring the material's architecture to optimize the eCE performances are studied. A completely reversible superelastic behavior at room temperature (297 K) is demonstrated in high porosity (64-73%) Ni-Fe-Ga foams with small stress hysteresis, which is greatly conducive to durable fatigue life. Consequentially, hierarchical pore foam with 64% porosity exhibits a maximum reversible ∆Tad of 2.0 K at much lower stress of 45 MPa with a large COPmat of 34. Moreover, it shows stable elastocaloric behavior (ΔTad = 2.0 K) over >300 superelastic cycles with no significant deterioration. The enhanced eCE cyclability can be attributed to the pore hierarchies, which remarkably reduce the grain boundary constraints and/or limit the propagation of cracks to induce multiple stress-induced martensitic transformations (MTs). Therefore, this work paves the way for designing durable fatigue life FMSMAs as promising eCMs by manipulating the material architectures.

Toughening of Ni-Mn-Based Polycrystalline Ferromagnetic Shape Memory Alloys.

Solid-state refrigeration technology is expected to replace conventional gas compression refrigeration technology because it is environmentally friendly and highly efficient. Among various solid-state magnetocaloric materials, Ni-Mn-based ferromagnetic shape memory alloys (SMAs) have attracted widespread attention due to their multifunctional properties, such as their magnetocaloric effect, elastocaloric effect, barocaloric effect, magnetoresistance, magnetic field-induced strain, etc. Recently, a series of in-depth studies on the thermal effects of Ni-Mn-based magnetic SMAs have been carried out, and numerous research results have been obtained. It has been found that poor toughness and cyclic stability greatly limit the practical application of magnetic SMAs in solid-state refrigeration. In this review, the influences of element doping, microstructure design, and the size effect on the strength and toughness of Ni-Mn-based ferromagnetic SMAs and their underlying mechanisms are systematically summarized. The pros and cons of different methods in enhancing the toughness of Ni-Mn-based SMAs are compared, and the unresolved issues are analyzed. The main research directions of Ni-Mn-based ferromagnetic SMAs are proposed and discussed, which are of scientific and technological significance and could promote the application of Ni-Mn-based ferromagnetic SMAs in various fields.

Effect of intercalated molybdenum atoms on structure and electrochemical properties of Mo1+xS2synthesized by hydrothermal method.

As an alternative anode to graphene, molybdenum disulfide (MoS2) has attracted much attention due to its layered structure and high specific capacity. Moreover, MoS2can be synthesized by hydrothermal method with low cost and the size of its layer spacing can be controlled. In this work, the results of experiment and calculation proved that the presence of intercalated Mo atoms, leading to the expansion of MoS2layer spacing and weakening of Mo-S bonding. For the electrochemical properties, the presence of intercalated Mo atoms causes the lower reduction potentials for the Li+intercalation and Li2S formation. In addition, the effective reduction of diffusion resistance and charge transfer resistance in Mo1+xS2leads to the acquisition of high specific capacity for battery applications.

Tunable Magnetocaloric Effect in Ni-Mn-Ga Microwires.

Magnetic refrigeration is of great interest due to its high energy efficiency, environmental friendliness and low cost. However, undesired hysteresis losses, concentrated working temperature interval (WTI) and poor mechanical stability are vital drawbacks that hinder its practical application. Off-stoichiometric Ni-Mn-Ga Heusler alloys are capable of giant magnetocaloric effect (MCE) and tunable transformation temperatures. Here, by creating Ni-Mn-Ga microwires with diameter of 35-80 µm using a melt-extraction technique, negligible hysteresis and relatively good mechanical stability are found due to the high specific surface area (SSA) that reduces incompatibility between neighboring grains. The high SSA also favors the element evaporation at high temperatures so that the transformation temperatures can be feasibly adjusted. Tunable magnetocaloric effect owing to different magneto-structural coupling states is realized by (i) composition design and subsequent tuning, which adjusts the temperature difference between the martensite transformation (MT) and the magnetic transition, and (ii) creation of gradient composition distribution state, which manipulates the MT range. Magnetic entropy change ΔSm ~-18.5 J kg-1 K-1 with relatively concentrated WTI and WTI up to ~60 K with net refrigeration capacity ~240 J kg-1 at 50 kOe are demonstrated in the present Ni-Mn-Ga microwires. This criterion is also applicable for other small-sized materials.

Dataset on the microstructure Ni50Mn38Sb9Si3 alloy and compositions of Ni50Mn38Sb12-x Si x (x=2.5, 3) ferromagnetic shape memory alloys.

The data presented in this article is the supplementary data of Zhang et al. (2018) [1]. The Ni50Mn38Sb9Si3 alloy is annealed at 1223 K for 24 h and then quenched into ice water; while the Ni50Mn38Sb9.5Si2.5 alloy is annealed at 1173 K for 24 h and then quenched into ice water. The microstructure of the Ni50Mn38Sb9Si3 alloy indicates that a higher heat treatment temperature cannot prevent the formation of secondary phases. Furthermore, the composition of α phase is similar to the nominal composition of the alloy. On the other hand, the nominal concentration of Si atoms and heat-treatment temperature do not affect the compositions of the ß and γ phases. For example, the compositions of the ß and γ phases in the Ni50Mn38Sb9Si3 alloy are similar when annealed at 1223 K for 24 h and 1173 K for 24 h.

Dataset on enhanced magnetic refrigeration capacity in Ni-Mn-Ga micro-particles.

The dataset presented in this paper is supporting the research article "Enhanced magnetic refrigeration capacity in Ni-Mn-Ga micro-particles" (Qian, et al., 2018) [1]. The martensite transformation temperature (Ms ) and the Curie point (Tc ) of the annealed alloys with nominal composition Ni55-xMn20+xGa25 (x = 0, 0.25, 0.5, 1, atomic percent, labeled as A1, A2, A3 and A4, respectively) varied with x, yielding a temperature difference Tc -Mc of 7.2 K at x = 0.5 (A3). The magnetization difference (ΔM) between the austenite and martensite, the field dependence of transformation temperature (ΔT/ΔH) and the thermal hysteresis loss of A3 and the according stress relief annealing (SRA) particles were demonstrated. The isothermal magnetization curves of A3 and the SRA particles were measured in order to determine the magnetocaloric effect.

Enhanced magnetocaloric effect in Ni-Mn-Sn-Co alloys with two successive magnetostructural transformations.

High magnetocaloric refrigeration performance requires large magnetic entropy change ΔS M and broad working temperature span ΔT FWHM . A fourth element doping of Co in ternary Ni-Mn-Sn alloy may significantly enhance the saturation magnetization of the alloy and thus enhance the ΔS M . Here, the effects of Co-doping on the martensite transformation, magnetic properties and magnetocaloric effects (MCE) of quaternary Ni47-xMn43Sn10Cox (x = 0, 6, 11) alloys were investigated. The martensite transformation temperatures decrease while austenite Curie point increases with Co content increasing to x = 6 and 11, thus broadening the temperature window for a high magnetization austenite (13.5, 91.7 and 109.1 A·m2/kg for x = 0, 6 and 11, respectively). Two successive magnetostructural transformations (A → 10 M and A → 10 M + 6 M) occur in the alloy x = 6, which are responsible for the giant magnetic entropy change ΔS M = 29.5 J/kg·K, wide working temperature span ΔT FWHM = 14 K and large effective refrigeration capacity RC eff = 232 J/kg under a magnetic field of 5.0 T. These results suggest that Ni40.6Mn43.3Sn10.0Co6.1 alloy may act as a potential solid-state magnetic refrigerant working at room temperature.