Enhanced absorption of SO2 from phosphogypsum decomposition by phosphate slurry for phosphoric acid production.

Phosphogypsum (PG) is a major industrial by-product of wet process phosphoric acid production, and untreated PG stockpiled on land will cause severe environmental pollution. Thermal treatment of PG is currently the mainstream treatment method PG can be thermally decomposed to produce CaO, and the decomposition process produces large amounts of SO2. In this paper, phosphate slurry was used to absorb SO2 generated during the PG decomposition to produce phosphoric acid. The effects of operating conditions such as pressure, inlet SO2 concentration, and additive content on the desulfurization efficiency, as well as phosphoric acid yield, were investigated. Under the optimal experimental parameters, the desulfurization efficiency was 100% in the first 3 h, and decreased to 67.42% after 5 h, the maximum phosphate concentration in the solution was 1445.92 mg/L. The Density functional theory (DFT) calculations showed that SO2 and O2 adsorbed on the surface of P2O5 underwent to generate SO3, which can react with H2O to produce H2SO4. Moreover, it was found that Fe3+ could enhance the catalytic oxidation process of SO2 and O2 by decreasing the reaction energy barrier. This study should be helpful for the recycling of phosphorus resources.

Enhanced NOx absorption in flue gas by wet oxidation of red mud and phosphorus sludge.

The environmental problem caused by industrial emissions of NOx has been studied in the past dacades. In this study, red mud coupling with phosphorus sludge were used to enhance the solution to absorb NOx from the flue gas. Firstly, red mud reacted with the binder silicic acid in the phosphorus sludge, destroying the emulsion structure of the phosphorus sludge. Then, the P4 in the phosphorus sludge is completely released, and the P4 reacted with O2 in the flue gas to produce O3 and O. NO and NO2 contained in the flue gas reacted with the active O and O3 to produce high-valent NOx, such as NO3, N2O5. At last, the mixed slurry of red mud and phosphorus sludge absorbed the high-valent NOx, resulting in the formation of Ca5(PO4)3F along with HNO3. Using phosphorus sludge to produce O3 in the reaction process can reduce the production cost of O3 and achieve waste utilization. Meanwhile, the interaction between red mud and phosphorus sludge can promote phosphorus sludge to produce O3 and remove F- from phosphorus sludge, as well as avoid the problem of secondary pollution. This study should be helpful for red mud and phosphorus sludge utilization and flue gas denitration.

Uptake of heavy metals by crops near a mining field: Pathways from roots and leaves.

Metal uptake and distribution in crops have been demonstrated to be highly variable and depending on the metal of interest and the crop type. However, no consensus is reached regarding the primary factor controlling metal uptake in crops. This study thus comparably investigated Hg, As, Zn, Pb, Cd and Cu uptake and distribution in three crops grown in a watershed near a copper mining field located in Yunnan, Southwestern China. The bioconcentration factor (BCF) and translocation factor (TF) were statistically compared for the same metal across different crops. Leafy crops had a stronger propensity to accumulate Hg, As and Zn than fruit crops. The ability of grain crops to accumulate Cd and Cu was much lower than leafy and fruit crops. The three crops all tended not to accumulate Pb in their edible tissues. The DTPA extracted metal concentrations were not statistically correlated with the metal concentrations in crop edible tissues. It is thus not practical to predict metal uptake of Hg, As, Pb and Zn through their available concentrations in soils. The contents of nitrogen and phosphorus, and competing metal ions present in paddy soil decreased the accumulation of Cu and Cd in rice grains. By means of hierarchical cluster analysis, the high accumulation of Zn in the edible tissues of fruit and grain crops was mainly due to dust inputs via phloem transport from leaves. This is why BCF(Zn) was the highest among the six metals for these two crops. For leafy crops, the accumulation of Hg, Cd and Zn in leaves was mainly through soil inputs by roots. Our findings serve as a scientific basis for the selection of crops in areas with high background of heavy metals.