Inhibiting Polyamide Intrusion of Thin Film Composite Membranes: Strategies and Environmental Implications.

Thin film composite polyamide (TFC) nanofiltration (NF) membranes represent extensive applications at the water-energy-environment nexus, which motivates unremitting efforts to explore membranes with higher performance. Intrusion of polyamide into substrate pores greatly restricts the overall membrane permeance because of the excessive hydraulic resistance, while the effective inhibition of intrusion remains technically challenging. Herein, we propose a synergetic regulation strategy of pore size and surface chemical composition of the substrate to optimize selective layer structure, achieving the inhibition of polyamide intrusion effective for the membrane separation performance enhancement. Although reducing the pore size of the substrate prevented polyamide intrusion at the intrapore, the membrane permeance was adversely affected due to the exacerbated "funnel effect". Optimizing the polyamide structure via surface chemical modification of the substrate, where reactive amino sites were in situ introduced by the ammonolysis of polyethersulfone substrate, allowed for maximum membrane permeance without reducing the substrate pore size. The optimal membrane exhibited excellent water permeance, ion selectivity, and emerging contaminants removal capability. The accurate optimization of selective layer is anticipated to provide a new avenue for the state-of-the-art membrane fabrication, which opens opportunities for promoting more efficient membrane-based water treatment applications.

Three-Dimensional Stable Cation-Exchange Membrane with Enhanced Mechanical, Electrochemical, and Antibacterial Performance by in Situ Synthesis of Silver Nanoparticles.

In this study, a simple and facile approach was proposed to synthesize silver nanoparticles (AgNPs) loaded cation-exchange membranes (CEMs). A wide analytical study involving scanning electronic microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy was accomplished to corroborate that the in situ generated AgNPs were uniformly dispersed in the polymer matrix. In addition, as a result of the proposed synthesis strategy, the cross-linking structure inside the membrane was formed. The proper particle size and dispersibility of the AgNPs improved the mechanical properties of the membranes. Besides, the optimal AgNP-loaded CEM exhibited excellent bacterial killing activities against Gram-negative bacteria and showed a controlled improvement in the electrochemical performance of the prepared membranes. These effects were caused by the obtained distribution of AgNPs near ion-exchange groups that increased the aggregation of water molecules around them, improving the efficiency of ion transport due the formation of array broad ion-transport channels. The optimized CEM [sulfonated polysulfone (60SPSF)-C3#-Ag-2] exhibited an enhanced NaCl removal ratio of 67.5% with a high current efficiency (96.9%) and a low energy consumption (5.84 kWh kg-1). The distance of the inhibition zone from the boundary of the membrane of SPSF-C3#-Ag-2 reached 4.8 mm. These results led us to suggest that the proposed synthesis strategy may have potential applications in the field of antibacterial and desalting ion-exchange membranes.

A comparison of genotoxicity change in reclaimed wastewater from different disinfection processes.

Effluents before disinfection from four wastewater reclamation plants were treated with chlorine (Cl2), ozone (O3), chlorine dioxide (ClO2), medium-pressure ultraviolet (MPUV) and four different combinations of the above, to evaluate the effect of disinfection processes on the genotoxicity removal by the SOS/umu test. Results showed that the genotoxicity increased after MPUV irradiation (10-100 mJ/cm2), but declined when adopting other disinfection processes. The effectiveness of genotoxicity reduction by five chemical disinfectants was identified as: O3 > pre-ozonation with Cl2 ≈ ClO2 > combination of ClO2 and Cl2 > Cl2. The sequential combination of MPUV, Cl2 and O3 reduced the genotoxicity to a level similar to the source water. The influence of differential disinfection process varied on iodinated wastewater, which is closely related to the competitive reactions between disinfectants, iodine and dissolved organic matters. The removal of genotoxic pollutants and the formation of genotoxic disinfection by-products are the two major factors that lead to the change in genotoxicity during disinfection.

On the mechanisms of the recurvature of super typhoon Megi.

Tropical cyclones (TC) are one of the most threatening natural hazards to human beings. Although significant improvements have been made in the track prediction of TCs during the past several decades, considerable uncertainties still exist, especially for recurving tracks. In this study, we explore the physical mechanisms that drove the large recurvature of super typhoon Megi through numerical sensitivity experiments using a regional atmospheric model. The results indicate that the cold air intrusion from the northwest to the southeast of China is the main cause of the sharp turning of Megi. This finding suggests that a cold air intrusion could be taken as an indicator for predicting the recurvature of a tropical cyclone in the future.