ABSTRACT
Spider dragline (major ampullate) silk is one of the toughest known fibers in nature and exhibits an excellent combination of high tensile strength and elasticity. Increasing evidence has indicated that preassembly plays a crucial role in facilitating the proper assembly of silk fibers by bridging the mesoscale gap between spidroin molecules and the final strong fibers. However, it remains challenging to control the preassembly of spidroins and investigate its influence on fiber structural and mechanical properties. In this study, we explored to bridge this gap by modulating the polyalanine (polyA) motifs in repetitive region of spidroins to tune their preassemblies in aqueous dope solutions. Three biomimetic silk proteins with varying numbers of alanine residues in polyA motif and comparable molecular weights were designed and biosynthesized, termed as N16C-5A, N15C-8A, and N13C-12A, respectively. It was found that all three proteins could form nanofibril assemblies in the concentrated aqueous dopes, but the size and structural stability of the fibrils were distinct from each other. The silk protein N15C-8A with 8 alanine residues in polyA motif allowed for the formation of stable nanofibril assemblies with a length of approximately 200 nm, which were not prone to disassemble or aggregate as that of N16C-5A and N13C-12A. More interestingly, the stable fibril assembly of N15C-8A enabled spinning of simultaneously strong (623.3 MPa) and tough (107.1 MJ m-3) synthetic fibers with fine molecular orientation and close interface packing of fibril bundles. This work highlights that modulation of polyA motifs is a feasible way to tune the morphology and stability of the spidroin preassemblies in dope solutions, thus controlling the structural and mechanical properties of the resulting fibers.
Subject(s)
Fibroins , Peptides , Animals , Amino Acid Motifs , Fibroins/chemistry , Fibroins/genetics , Nanofibers/chemistry , Peptides/chemistry , Silk/chemistry , Spiders/chemistry , Tensile StrengthABSTRACT
Biomolecular condensates are dynamic subcellular compartments that lack surrounding membranes and can spatiotemporally organize the cellular biochemistry of eukaryotic cells. However, such dynamic organization has not been realized in prokaryotes that naturally lack organelles, and strategies are urgently needed for dynamic biomolecular compartmentalization. Here we develop a light-switchable condensate system for on-demand dynamic organization of functional cargoes in the model prokaryotic Escherichia coli cells. The condensate system consists of two modularly designed and genetically encoded fusions that contain a condensation-enabling scaffold and a functional cargo fused to the blue light-responsive heterodimerization pair, iLID and SspB, respectively. By appropriately controlling the biogenesis of the protein fusions, the condensate system allows rapid recruitment and release of cargo proteins within seconds in response to light, and this process is also reversible and repeatable. Finally, the system is demonstrated to dynamically control the subcellular localization of a cell division inhibitor, SulA, which enables the reversible regulation of cell morphologies. Therefore, this study provides a new strategy to dynamically control cellular processes by harnessing light-controlled condensates in prokaryotic cells.
ABSTRACT
Protein compartments are distinct structures assembled in living cells via self-assembly or phase separation of specific proteins. Significant efforts have been made to discover their molecular structures and formation mechanisms, as well as their fundamental roles in spatiotemporal control of cellular metabolism. Here, we review the design and construction of synthetic protein compartments for spatial organization of target metabolic pathways toward increased efficiency and specificity. In particular, we highlight the compartmentalization strategies and recent examples to speed up desirable metabolic reactions, to reduce the accumulation of toxic metabolic intermediates, and to switch competing metabolic pathways. We also identify the most important challenges that need to be addressed for exploitation of these designer compartments as a versatile toolkit in metabolic reprogramming.
Subject(s)
Metabolic Engineering , Metabolic Networks and PathwaysABSTRACT
Soft robots capable of efficiently implementing tasks in fluid-immersed environments hold great promise for diverse applications. However, it remains challenging to achieve robotization that relies on dynamic underwater adhesion and morphing capability. Here we propose the construction of such robots with designer protein materials. Firstly, a resilin-like protein is complexed with polyoxometalate anions to form hydrogels that can rapidly switch between soft adhesive and stiff non-adhesive states in aqueous environments in response to small temperature variation. To realize remote control over dynamic adhesion and morphing, Fe3O4 nanoparticles are then integrated into the hydrogels to form soft robots with photothermal and magnetic responsiveness. These robots are demonstrated to undertake complex tasks including repairing artificial blood vessel, capturing and delivering multiple cargoes in water under cooperative control of infrared light and magnetic field. These findings pave an avenue for the creation of protein-based underwater robots with on-demand functionalities.
Subject(s)
Blood Substitutes , Robotics , Humans , Physical Phenomena , Hydrogels , Infrared Rays , Tissue Adhesions , WaterABSTRACT
3,4-Dihydroxyphenylalanine (DOPA), a naturally occurring yet noncanonical amino acid, endows protein polymers with diverse chemical reactivities and novel functionalities. Although many efforts have been made to incorporate DOPA into proteins, the incorporation efficiency and production titer remain low and severely hinder the exploration of these peculiar proteins for biomaterial fabrication. Here, we report an efficient biosynthetic strategy to produce large amounts of DOPA-incorporated structural proteins for the fabrication of hydrogels with tunable mechanical properties. First, synthetic genes were constructed that encode repetitive resilin-like proteins (RLPs) with varying proportions of tyrosine residues and molecular weights (Mw). Decoding of these genes into RLPs incorporated with DOPA was achieved via mis-aminoacylation of DOPA by endogenous tyrosyl-tRNA synthetase (TyrRS) in recombinant Escherichia coli cells. By developing a stoichiometry-guided two-phase culture strategy, we achieved independent control of the bacterial growth and protein synthesis phases. This enabled hyperproduction of the DOPA-incorporated RLPs at gram-per-liter levels and with a high DOPA incorporation yield of 76-85%. The purified DOPA-containing RLPs were then successfully cross-linked into bulk hydrogels via facile DOPA-Fe3+ complexations. Interestingly, these hydrogels exhibited viscoelastic and self-healing properties that are highly dependent on the catechol content and Mw of the RLPs. Finally, exploration of the molecular cross-linking mechanisms revealed that higher DOPA contents of the proteins would result in the concomitant occurrence of metal coordination and oxidative covalent cross-linking. In summary, our results suggest a useful platform to generate DOPA-functionalized protein materials and provide deeper insights into the gelation systems based on DOPA chemistry.
Subject(s)
Dihydroxyphenylalanine , Hydrogels , Dihydroxyphenylalanine/chemistry , Hydrogels/chemistry , Insect Proteins/chemistry , PolymersABSTRACT
Vehicles derived from genetically engineered protein polymers have gained momentum in the field of biomedical engineering due to their unique designability, remarkable biocompatibility and excellent biodegradability. However, the design and production of these protein polymers with on-demand sequences and supramolecular architectures remain underexplored, particularly from a synthetic biology perspective. In this review, we summarize the state-of-the art strategies for constructing the highly repetitive genes encoding the protein polymers, and highlight the advanced approaches for metabolically engineering expression hosts towards high-level biosynthesis of the target protein polymers. Finally, we showcase the typical protein polymers utilized to fabricate delivery vehicles.
Subject(s)
Polymers , Synthetic Biology , Humans , ProteinsABSTRACT
Protein condensates are distinct structures assembled in living cells that concentrate molecules via phase separation in a confined subcellular compartment. In the past decade, remarkable advances have been made to discover the fundamental roles of the condensates in spatiotemporal control of cellular metabolism and physiology and to reveal the molecular principles, components and driving forces that underlie their formation. Here we review the unique properties of the condensates, the promise and hurdles for harnessing them toward purposeful design and manipulation of biological functions in living cells. In particular, we highlight recent advances in mining and understanding the proteinaceous components for creating designer condensates, along with the engineering approaches to manipulate their material properties and biological functions. With these advances, a greater variety of complex organelle-like structures can be built for diverse applications, with unprecedented effects on synthetic biology.
Subject(s)
Metabolic Engineering , Synthetic Biology , Proteins/chemistry , OrganellesABSTRACT
Spatially directed synthesis of quantum dots (QDs) is intriguing yet challenging in organisms, due to the dispersed feature of templating biomolecules and precursors. Whether this task could be accomplished by biomolecular condensates, an emerging type of membraneless compartments in cells remains unknown. Here we report synthetic protein condensates for templated synthesis of QDs in bacterium Escherichia coli. This was realized by overexpression of spider silk protein to bind precursor ions and recruit other necessary components, which induced the spidroin to form more ß-sheet structures for assembly and maturation of the protein condensates. This in turn enabled formation and co-localization of the fluorescent QDs to "light up" the condensates, and alleviated cytotoxicity of the precursor heavy metal ions and resulting QDs. Thus, our results suggest a new strategy for nanostructure synthesis and deposition in subcellular compartments with great potential for in situ applications.
Subject(s)
Fibroins , Quantum Dots , Fibroins/chemistry , Quantum Dots/chemistry , Escherichia coli , Silk/chemistry , IonsABSTRACT
Spider dragline silk is a remarkable protein fiber that is mechanically superior to almost any other natural or synthetic material. As a sustainable supply of natural dragline silk is not feasible, recombinant production of silk fibers with native-like mechanical properties and non-native physiochemical functions is highly desirable for various applications. Here, we report a new strategy for simultaneous functionalization and reinforcement of recombinant spider silk fibers by confined nanoparticle formation. First, a mimic silk protein (N16C) of spider Trichonephila clavipes was recombinantly produced and wet-spun into fibers. Drawing the as-spun fibers in water led to post-drawn fibers more suitable for the templated synthesis of nanoparticles (NPs) with uniform distribution throughout the synthetic fibers. This was exemplified using a chemical precipitation reaction to generate copper sulfide nanoparticle-incorporated fibers. These fibers and the derived fabric displayed a significant photothermal effect as their temperatures could increase to over 40 °C from room temperature within 3 min under near-infrared laser irradiation or simulated sunlight. In addition, the tensile strength and toughness of the nanofunctionalized fibers were greatly enhanced, and the toughness of these synthetic fibers could reach 160.1 ± 21.4 MJ m-3, which even exceeds that of natural spider dragline silk (111.19 ± 30.54 MJ m-3). Furthermore, the confined synthesis of gold NPs via a redox reaction was shown to improve the ultraviolet-protective effect and tensile mechanical properties of synthetic silk fibers. These results suggest that our strategy may have great potential for creating functional and high-performance spider silk fibers and fabrics for wide applications.
Subject(s)
Fibroins , Nanoparticles , Fibroins/chemistry , Silk/chemistry , Tensile StrengthABSTRACT
Matrix stiffness and fibrous structure provided by the native extracellular matrix have been increasingly appreciated as important cues in regulating cell behaviors. Recapitulating these physical cues for cell fate regulation remains a challenge due to the inherent difficulties in making mimetic hydrogels with well-defined compositions, tunable stiffness, and structures. Here, we present two series of fibrous and porous hydrogels with tunable stiffness based on genetically engineered resilin-silk-like and resilin-like protein polymers. Using these hydrogels as substrates, the mechanoresponses of bone marrow mesenchymal stem cells to stiffness and fibrous structure were systematically studied. For both hydrogel series, increasing compression modulus from 8.5 to 14.5 and 23 kPa consistently promoted cell proliferation and differentiation. Nonetheless, the promoting effects were more pronounced on the fibrous gels than their porous counterparts at all three stiffness levels. More interestingly, even the softest fibrous gel (8.5 kPa) allowed the stem cells to exhibit higher endothelial differentiation capability than the toughest porous gel (23 kPa). The predominant role of fibrous structure on the synergistic regulation of endothelial differentiation was further explored. It was found that the stiffness signal activated Yes-associated protein (YAP), the main regulator of endothelial differentiation, via spreading of focal adhesions, whereas fibrous structure reinforced YAP activation by promoting the maturation of focal adhesions and associated F-actin alignment. Therefore, our results shed light on the interplay of physical cues in regulating stem cells and may guide the fabrication of designer proteinaceous matrices toward regenerative medicine.
Subject(s)
Hydrogels , Mesenchymal Stem Cells , Cell Differentiation , Extracellular Matrix/metabolism , Hydrogels/chemistry , Stem CellsABSTRACT
Spider dragline silk is a remarkable fiber made of unique proteins-spidroins-secreted and stored as a concentrated aqueous dope in the major ampullate gland of spiders. This feat has inspired engineering of microbes to secrete spidroins for spinning into tough synthetic fibers, which remains a challenge due to the aggregation-prone feature of the spidroins and low secretory capacity of the expression hosts. Here we report metabolic engineering of Corynebacterium glutamicum to efficiently secrete recombinant spidroins. Using a model spidroin MaSpI16 composed of 16 consensus repeats of the major ampullate spidroin 1 of spider Trichonephila clavipes, we first identified the general Sec protein export pathway for its secretion via N-terminal fusion of a translocation signal peptide. Next we improved the spidroin secretion levels by selection of more suitable signal peptides, multiplexed engineering of the bacterial host, and by high cell density cultivation of the resultant recombinant strains. The high abundance (>65.8%) and titer (554.7 mg L-1) of MaSpI16 in the culture medium facilitated facile, chromatography-free recovery of the spidroin with a purity of 93.0%. The high solubility of the purified spidroin enabled preparation of highly concentrated aqueous dope (up to 66%) amenable for spinning into synthetic fibers with an appreciable toughness of 70.0 MJ m-3. The above metabolic and processing strategies were also found applicable for secretory production of the higher molecular weight spidroin MaSpI64 (64 consensus repeats) to yield similarly tough fibers. These results suggest the good potential of secretory production of protein polymers for sustainable supply of fibrous materials.
Subject(s)
Corynebacterium glutamicum , Silk , Arthropod Proteins , Corynebacterium glutamicum/genetics , Corynebacterium glutamicum/metabolism , Molecular Weight , Silk/chemistry , Silk/metabolismABSTRACT
Electron beam lithography (EBL) is renowned to provide fabrication resolution in the deep nanometer scale. One major limitation of current EBL techniques is their incapability of arbitrary 3d nanofabrication. Resolution, structure integrity and functionalization are among the most important factors. Here we report all-aqueous-based, high-fidelity manufacturing of functional, arbitrary 3d nanostructures at a resolution of sub-15 nm using our developed voltage-regulated 3d EBL. Creating arbitrary 3d structures of high resolution and high strength at nanoscale is enabled by genetically engineering recombinant spider silk proteins as the resist. The ability to quantitatively define structural transitions with energetic electrons at different depths within the 3d protein matrix enables polymorphic spider silk proteins to be shaped approaching the molecular level. Furthermore, genetic or mesoscopic modification of spider silk proteins provides the opportunity to embed and stabilize physiochemical and/or biological functions within as-fabricated 3d nanostructures. Our approach empowers the rapid and flexible fabrication of heterogeneously functionalized and hierarchically structured 3d nanocomponents and nanodevices, offering opportunities in biomimetics, therapeutic devices and nanoscale robotics.
Subject(s)
Silk/chemistry , Spiders/metabolism , Animals , Biomechanical Phenomena , Fibroins/chemistry , Fibroins/genetics , Fibroins/metabolism , Nanostructures/chemistry , Silk/genetics , Silk/metabolism , Spiders/chemistry , Spiders/geneticsABSTRACT
Spider dragline silk is a remarkable fiber made by spiders from an aqueous solution of spidroins, and this feat is largely attributed to the tripartite domain architecture of the silk proteins leading to the hierarchical assembly at the nano- and microscales. Although individual amino- and carboxy-terminal domains have been proposed to relate to silk protein assembly, their tentative synergizing roles in recombinant spidroin storage and spinning into synthetic fibers remain elusive. Here, we show biosynthesis and self-assembly of a mimic spidroin composed of amino- and carboxy-terminal domains bracketing 16 consensus repeats of the core region from spider Trichonephila clavipes. The presence of both termini was found essential for self-assembly of the mimic spidroin termed N16C into fibril-like (rather than canonical micellar) nanostructures in concentrated aqueous dope and ordered alignment of these nanofibrils upon extrusion into an acidic coagulation bath. This ultimately led to continuous, macroscopic fibers with a tensile fracture toughness of 100.9 ± 13.2 MJ m-3, which is comparable to that of their natural counterparts. We also found that the recombinant proteins lacking one or both termini were unable to similarly preassemble into fibrillar nanostructures in dopes and thus yielded inferior fiber properties. This work thereby highlights the synergizing role of terminal domains in the storage and processing of recombinant analogues into tough synthetic fibers.
Subject(s)
Fibroins , Micelles , Protein Domains , Recombinant Proteins/genetics , SilkABSTRACT
Rubberlike protein hydrogels are unique in their remarkable stretchability and resilience but are usually low in strength due to the largely unstructured nature of the constitutive protein chains, which limits their applications. Thus, reinforcing protein hydrogels while retaining their rubberlike properties is of great interest and has remained difficult to achieve. Here, we propose a fibrillization strategy to reinforce hydrogels from engineered protein copolymers with photo-cross-linkable resilin-like blocks and fibrillizable silklike blocks. First, the designer copolymers with an increased ratio of the silk to resilin blocks were photochemically cross-linked into rubberlike hydrogels with reinforced mechanical properties. The increased silk-to-resilin ratio also enabled self-assembly of the resulting copolymers into fibrils in a time-dependent manner. This allowed controllable fibrillization of the copolymer solutions at the supramolecular level for subsequent photo-cross-linking into reinforced hydrogels. Alternatively, the as-prepared chemically cross-linked hydrogels could be reinforced at the material level by inducing fibrillization of the constitutive protein chains. Finally, we demonstrated the advantage of reinforcing these hydrogels for use as piezoresistive sensors to achieve an expanded pressure detection range. We anticipate that this strategy may provide intriguing opportunities to generate robust rubberlike biomaterials for broad applications.
Subject(s)
Biocompatible Materials , Hydrogels , Polymers , SilkABSTRACT
Despite considerable progress having been made in thermosensitive protein hydrogels, regulating their thermal transitions remains a challenge due to the intricate molecular structures and interactions of the underlying protein polymers. Here we report a genetic fusion strategy to tune the unique dual thermal transitions of the C-terminal domain (CTD) of spider major ampullate spidroin 1, and explore the regulation mechanism by biophysical characterization and molecular dynamics simulations. We found that the fusion of elastin-like polypeptides (ELPs) tuned the dual transition temperatures of CTD to a physiologically relevant window, by introducing extra hydrogen bonding at low temperatures and hydrophobic interactions at high temperatures. The resulting hydrogels constructed from the fusion proteins were demonstrated to be a promising vehicle for cell preservation and delivery. This study provides insights on the regulation of the dual thermosensitive protein hydrogels and suggests a potential application of the hydrogels for consolidated cell storage and delivery.
Subject(s)
Hydrogels , Peptides , Hydrogels/chemistry , Hydrophobic and Hydrophilic Interactions , Peptides/chemistry , Polymers/chemistry , Transition TemperatureABSTRACT
Membraneless organelles formed by liquid-liquid phase separation of proteins or nucleic acids are involved in diverse biological processes in eukaryotes. However, such cellular compartments have yet to be discovered or created synthetically in prokaryotes. Here, we report the formation of liquid protein condensates inside the cells of prokaryotic Escherichia coli upon heterologous overexpression of intrinsically disordered proteins such as spider silk and resilin. In vitro reconstitution under conditions that mimic intracellular physiologically crowding environments of E. coli revealed that the condensates are formed via liquid-liquid phase separation. We also show functionalization of these condensates via targeted colocalization of cargo proteins to create functional membraneless compartments able to fluoresce and to catalyze biochemical reactions. The ability to form and functionalize membraneless compartments may serve as a versatile tool to develop artificial organelles with on-demand functions in prokaryotes for applications in synthetic biology.
Subject(s)
Cell Membrane , Escherichia coli/physiology , Organelles , Cytosol/chemistry , Cytosol/metabolism , Dynamic Light Scattering , Fibroins/chemistry , Gene Expression Regulation, Bacterial , Green Fluorescent Proteins/chemistry , Microscopy, Confocal , Microscopy, Electron, Transmission , Microscopy, FluorescenceABSTRACT
Recombinant protein polymers that mimic the structures and functions of natural proteins and those tailor-designed with new properties provide a family of uniquely tunable and functional materials. However, the diversity of genetically engineered protein polymers is still limited. As a powerful engine for the creation of new biological devices and systems, synthetic biology is promising to tackle the challenges that exist in conventional studies on protein polymers. Here we review the advances in design and biosynthesis of advanced protein materials by synthetic biology approaches. In particular, we highlight their roles in expanding the variety of designer protein polymers and creating programmable materials with live cells.
Subject(s)
Polymers , Synthetic Biology , Biocompatible Materials , Genetic Engineering , Proteins/geneticsABSTRACT
Integrating multifunctionality such as stretchability, adhesiveness, and electroconductivity on a single protein hydrogel is highly desirable for various applications, and remains a challenge. Here we present the development of such multifunctional hydrogels based on resilin, a natural rubber-like material with remarkable extensibility and resilience. First, genetically engineered reslin-like proteins (RLPs) with varying molecular weight were biosynthesized to tune mechanical strength and stiffness of the cross-linked RLP hydrogels. Second, glycerol was incorporated into the hydrogels to endow adhesive properties. Next, a graphene-RLP conjugate was synthesized for cross-linking with the unmodified, pristine RLP to form an integrated network. The obtained hybrid hydrogel could be stretched to over four times of its original length, and self-adhered to diverse substrate surfaces due to its high adhesion strength of â¼24 kPa. Furthermore, the hybrid hydrogel showed high sensitivity, with a gauge factor of 3.4 at 200% strain, and was capable of real-time monitoring human activities such as finger bending, swallowing, and phonating. Due to these favorable attributes, the graphene/resilin hybrid hydrogel was a promising material for use in wearable sensors. In addition, the above material design and functionalization strategy may provide intriguing opportunities to generate innovative materials for broad applications.
Subject(s)
Biosensing Techniques , Hydrogels/chemistry , Insect Proteins/biosynthesis , Rubber/chemistry , Adhesives/chemical synthesis , Adhesives/chemistry , Electric Conductivity , Humans , Hydrogels/chemical synthesis , Insect Proteins/chemistry , Molecular Weight , Rubber/chemical synthesis , Wearable Electronic DevicesABSTRACT
OBJECTIVE: To explore related risk factors of postoperative wound infection in lumbar spondylolisthesis. METHODS: The clinical data of 296 patients with lumbar spondylolisthesis underwent posterior decompression and fusion from January 2013 to December 2017 were retrospectively analyzed. According to whether the wound was infected or not, the patients were divided into infection group and non-infection group. There were 29 patients in infection group including 13 males and 16 females with an average age of(67.03±1.01) years old and 267 patients in non-infection group including 91 males and 176 females with an average age of (52.32±16.08) years old. Gender, age, body mass index (BMI), smoking history, diabetes history, hormone use history, albumin level, operation time, ASA score, perioperative blood transfusion and drainage time were recorded. The multivariate Logistic regression analysis was carried out if univariate Logistic regression analysis of risk factors were statistical significant. At the same time the SPSS decision tree model was used to determine the stratified points of the continuous variables to further specify the independent risk factors. RESULTS: Postoperative wound infection occurred in 29 cases among all patients, with the incidence rate of 9.8% (29/296). There were significant differences in BMI, age, diabetes history, drainage time, hormone use history, albumin level and operation time between two groups(P<0.05). After excluding mutual infection among these factors by univariate Logistic regression analysis, results showed obesity, age, diabetes history, hormone use history, operation time, drainage time may be risk factors for wound infection after lumbar spondylolisthesis surgery. By multivariate Logistic regression analysis of possible risk factors, results showed age, diabetes history, hormone use history and drainage time were independent risk factors for wound infection after operation. CONCLUSIONS: Age, diabetes history, hormone use history and drainage time are independent risk factors for postoperative wound infection. Age more than or equal to 64 years old, drainage tube retention time more than 48 h, complicated with diabetes mellitus and hormone use are high risk factors for postoperative wound infection.