Temperature sensor based on an isopropanol-sealed photonic crystal fiber in-line interferometer with enhanced refractive index sensitivity.

We fabricate a simple, compact, and stable temperature sensor based on a liquid-sealed photonic crystal fiber (PCF) in-line nonpolarimetric modal interferometer. Different from other reported PCF devices, it does not need expensive polarimetric devices, and the liquid is sealed in one fiber. The device consists of a stub of isopropanol-filled PCF spliced between standard single-mode fibers. The temperature sensitivity (-166 pm/°C) increases over an order of magnitude compared with those of the previous sensors based on air-sealed PCF interferometers built via fusion splicing with the same mechanism. In addition, the refractive index sensitivity also increases. Higher temperature sensitivity can be realized by infiltrating some liquid having a higher thermo-optic coefficient into the microholes of the PCF.

Demonstration of a compact temperature sensor based on first-order Bragg grating in a tapered fiber probe.

We experimentally demonstrate an all-silica first-order fiber Bragg grating (FBG) for high temperature sensing by focused ion beam (FIB) machining in a fiber probe tapered to a point. This 61-period FBG is compact (~36.6 µm long and ~6.5 µm in diameter) with 200-nm-deep shallow grooves. We have tested the sensor from room temperature to around 500 °C and it shows a temperature sensitivity of nearly 20 pm/°C near the resonant wavelength of 1550 nm. This kind of sensor takes up little space because of its unique geometry and small size and may be integrated in devices that work in harsh environment or for detecting small objects.

Miniature tapered photonic crystal fiber interferometer with enhanced sensitivity by acid microdroplets etching.

We fabricate a miniature tapered photonic crystal fiber (PCF) interferometer with enhanced sensitivity by acid microdroplets etching. This method is very simple and cost effective, avoiding elongating the PCF, moving and refixing the device during etching, and measuring. The refractive index sensing properties with different PCF diameters are investigated both theoretically and experimentally. The tapering velocity can be controlled by the microdroplet size and position. The sensitivity greatly increases (five times, 750 nm/RIU) and the size decreases after slightly tapering the PCF. The device keeps low temperature dependence before and after tapering. More uniformly and thinly tapered PCFs can be realized with higher sensitivity (∼100 times) by optimizing the etching process.