On the fracture mechanisms of nacre: Effects of structural orientation.

The nacre of mollusk shells is distinguished by an exceptional mechanical efficiency which is derived essentially from its lamellar structure and frequently acts as a source of inspiration for the development of biomimetic materials. The structure and mechanical properties of nacre have been intensively investigated with a special focus on its toughening strategies; nevertheless, the fracture mechanisms, more specifically the critical stress/strain conditions for the failure of nacre, and the effects of structural orientation and hydration state remain largely unexplored. Here uniaxial compression tests were performed on nacre of both dry and hydrated states with different off-axis angles, i.e., the inclination of loading axis with respect to the lamellar structure, ranging from 0° to 90°. The mechanical properties and fracture characteristics of nacre and their dependences on the structural orientation and hydration state were elucidated in terms of mechanics behind failure. Quantitative relationships were established between the mechanical properties and off-axis angle based on different failure criteria. The competition between the fracture modes of fragmentation and shearing was quantified by comparing their respective driving force and resistance on the interfacial plane. This study may aid the understanding on the mechanical behavior of nacre and nacre-inspired synthetic materials and promote a better replication of the underlying design principles of nacre in man-made systems.

Notch fatigue behavior: Metallic glass versus ultra-high strength steel.

Studying the effect of notch on the fatigue behavior of structural materials is of significance for the reliability and safety designing of engineering structural components. In this work, we conducted notch fatigue experiments of two high-strength materials, i.e. a Ti32.8Zr30.2Ni5.3Cu9Be22.7 metallic glass (MG) and a 00Ni18Co15Mo8Ti ultra-high strength steel (CM400 UHSS), and compared their notch fatigue behavior. Experimental results showed that although both the strength and plasticity of the MG were much lower than those of the UHSS, the fatigue endurance limit of the notched MG approached to that of the notched UHSS, and the fatigue ratio of the notched MG was even higher. This interesting finding can be attributed to the unique shear banding mechanism of MG. It was found that during fatigue process abundant shear bands formed ahead of the notch root and in the vicinity of the crack in the notched MG, while limited plastic deformation was observed in the notched UHSS. The present results may improve the understanding on the fatigue mechanisms of high-strength materials and offer new strategies for structural design and engineering application of MG components with geometrical discontinuities.

Generalized energy failure criterion.

Discovering a generalized criterion that can predict the mechanical failure of various different structural materials is one of ultimate goals for scientists in both material and mechanics communities. Since the first study on the failure criterion of materials by Galileo, about three centuries have passed. Now we eventually find the "generalized energy criterion", as presented here, which appears to be one universal law for various different kinds of materials. The validity of the energy criterion for quantitatively predicting the failure is experimentally confirmed using a metallic glass. The generalized energy criterion reveals the competition and interaction between shear and cleavage, the two fundamental inherent failure mechanisms, and thus provides new physical insights into the failure prediction of materials and structural components.

Anisotropic mechanical behaviors and their structural dependences of crossed-lamellar structure in a bivalve shell.

Crossed-lamellar structure is one of the most common organizations found in mollusk shells and may serve as a natural mimetic model for designing bio-inspired synthetic materials. Nonetheless, the mechanical behaviors and corresponding mechanisms have rarely been investigated for individual macro-layer of such structure. The integrated effects of orientation and hydration also remain unclear. In this study, the mechanical behaviors and their structural dependences of pure crossed-lamellar structure in Saxidomus purpuratus shell were systematically examined by three-point bending and compression tests. Mechanical properties and fracture mechanisms were revealed to depend strongly on the orientation, hydration state and loading condition. Three basic cracking modes of inter-platelet, trans-platelet, and along the interfaces between first-order lamellae were identified, and the interfacial separation was enhanced by hydration. Macroscopic compressive fracture was accomplished through axial splitting during which multiple toughening mechanisms were activated. The competition among different cracking modes was quantitatively evaluated by analyzing their driving stresses and resistances from fundamental mechanics. This study helps to clarify the mechanical behaviors of naturally occurring crossed-lamellar structure, and accordingly, aids in designing new bio-inspired synthetic materials by mimicking it.

Stepwise work hardening induced by individual grain boundary in Cu bicrystal micropillars.

Vast experiments have demonstrated that the external specimen size makes a large difference in the deformation behavior of crystalline materials. However, as one important kind of internal planar defects, the role of grain boundary (GB) in small scales needs to be clarified in light of the scarce and inconsistent experimental results at present. Through compression of Cu bicrystal and its counterpart monocrystal micropillars, it is found that, in contrast to the monocrystals, the bicrystals are characterized by work hardening with discrete strain bursts. Interestingly, the stress rise between two adjacent strain bursts of the bicrystals increases with the decrease of specimen size. The results suggest that GBs play a critical role in the work hardening of materials in small scales, which may provide important implications to further understand the general work hardening behaviors of materials in the future.

Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites.

As two important mechanical properties, strength and ductility generally tend to be muturally exclusive in conventional engineering materials. The breakthrough of such a trade-off has been potentiated by the recently developed CuZr-based bulk metallic glass (BMG) composites ductilized by a shape memory CuZr(B2) phase. Here the microstructural dependences of tensile properties for the CuZr-based BMG composites were elucidated qualitatively and modeled quantitatively, and the underlying mechanisms were unraveled. Through the microstructural percolation induced by matching the length scales of particle size and interparticle spacing, a notable breakthrough was achieved in the composites that the general conflicts between strength and ductility can be defeated. This study is expected to greatly aid in the microstructural design and tailoring for improved properties of BMG composites. It also has implications for the development of strong and ductile materials in the future.