General negative pressure annealing approach for creating ultra-high-loading single atom catalyst libraries.

Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3-44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.

Dual Channel H2O2 Photosynthesis in Pure Water over S-Scheme Heterojunction Cs3PMo12/CC Boosted by Proton and Electron Reservoirs.

Dual channel photo-driven H2O2 production in pure water on small-scale on-site setups is a promising strategy to provide low-concentrated H2O2 whenever needed. This process suffers, however, strongly from the fast recombination of photo-generated charge carriers and the sluggish oxidation process. Here, insoluble Keggin-type cesium phosphomolybdate Cs3PMo12O40 (abbreviated to Cs3PMo12) is introduced to carbonized cellulose (CC) to construct S-scheme heterojunction Cs3PMo12/CC. Dual channel H2O2 photosynthesis from both H2O oxidation and O2 reduction in pure water has been thus achieved with the production rate of 20.1 mmol L-1 gcat. -1 h-1, apparent quantum yield (AQY) of 2.1% and solar-to-chemical conversion (SCC) efficiency of 0.050%. H2O2 accumulative concentration reaches 4.9 mmol L-1. This high photocatalytic activity is guaranteed by unique features of Cs3PMo12/CC, namely, S-scheme heterojunction, electron reservoir, and proton reservoir. The former two enhance the separation of photo-generated charge carriers, while the latter speeds up the torpid oxidation process. In situ experiments reveal that H2O2 is formed via successive single-electron transfer in both channels. In real practice, exposing the reaction system under natural sunlight outdoors successfully results in 0.24 mmol L-1 H2O2. This work provides a key practical strategy for designing photocatalysts in modulating redox half-reactions in photosynthesis.

Surface-Diffusion-Induced Amorphization of Pt Nanoparticles over Ru Oxide Boost Acidic Oxygen Evolution.

Phase transformation offers an alternative strategy for the synthesis of nanomaterials with unconventional phases, allowing us to further explore their unique properties and promising applications. Herein, we first observed the amorphization of Pt nanoparticles on the RuO2 surface by in situ scanning transmission electron microscopy. Density functional theory calculations demonstrate the low energy barrier and thermodynamic driving force for Pt atoms transferring from the Pt cluster to the RuO2 surface to form amorphous Pt. Remarkably, the as-synthesized amorphous Pt/RuO2 exhibits 14.2 times enhanced mass activity compared to commercial RuO2 catalysts for the oxygen evolution reaction (OER). Water electrolyzer with amorphous Pt/RuO2 achieves 1.0 A cm-2 at 1.70 V and remains stable at 200 mA cm-2 for over 80 h. The amorphous Pt layer not only optimized the *O binding but also enhanced the antioxidation ability of amorphous Pt/RuO2, thereby boosting the activity and stability for the OER.

N-Coordinated Iridium-Molybdenum Dual-Atom Catalysts Enabling Efficient Bifunctional Hydrogen Electrocatalysis.

Achieving effective hydrogen evolution/oxidation reaction (HER/HOR) across a wide pH span is of critical importance in unlocking the full potential of hydrogen energy but remains intrinsically challenging. Here, we engineer the N-coordinated Ir-Mo dual atoms on a carbon matrix by ultrafast high-temperature sintering, creating an efficient bifunctional electrocatalyst for both HER and HOR in both acidic and alkaline electrolytes. The optimized catalyst, Ir-Mo DAC/NC, demonstrates exceptional performance, with a significantly reduced HER overpotential of 11.3 mV at 10 mA/cm2 and a HOR exchange current (i0,m) of 3972 mA/mgIr in acidic conditions, surpassing the performance of Pt/C and Ir/C catalysts. In alkaline conditions, Ir-Mo DAC/NC also outperforms Pt/C, as evidenced by its low HER overpotential of 23 mV at 10 mA/cm2 and a high i0,m of 1308 mA/mgIr. Furthermore, our catalyst exhibits remarkable stability in both acidic and alkaline environments. DFT calculations results reveal that the superior electrochemical performance of Ir-Mo DAC/NC arises from the electronic synergy between Ir and Mo pairs, which regulates the interaction between the intermediates and active sites. These findings present a promising strategy for the development of dual-atom catalysts (DACs), with potential applications in the polymer fuel cells and water electrolyzers.

Efficient industrial-current-density acetylene to polymer-grade ethylene via hydrogen-localization transfer over fluorine-modified copper.

Electrocatalytic acetylene semi-hydrogenation to ethylene powered by renewable electricity represents a sustainable pathway, but the inadequate current density and single-pass yield greatly impedes the production efficiency and industrial application. Herein, we develop a F-modified Cu catalyst that shows an industrial partial current density up to 0.76 A cm-2 with an ethylene Faradic efficiency surpass 90%, and the maximum single-pass yield reaches a notable 78.5%. Furthermore, the Cu-F showcase the capability to directly convert acetylene into polymer-grade ethylene in a tandem flow cell, almost no acetylene residual in the production. Combined characterizations and calculations reveal that the Cuδ+ (near fluorine) enhances the water dissociation, and the generated active hydrogen are immediately transferred to Cu0 (away from fluorine) and react with the locally adsorbed acetylene. Therefore, the hydrogen evolution reaction is surpassed and the overall acetylene semi-hydrogenation performance is boosted. Our findings provide new opportunity towards rational design of catalysts for large-scale electrosynthesis of ethylene and other important industrial raw.

Ru-W Pair Sites Enabling the Ensemble Catalysis for Efficient Hydrogen Evolution.

Simultaneously optimizing elementary steps, such as water dissociation, hydroxyl transferring, and hydrogen combination, is crucial yet challenging for achieving efficient hydrogen evolution reaction (HER) in alkaline media. Herein, Ru single atom-doped WO2 nanoparticles with atomically dispersed Ru-W pair sites (Ru-W/WO2 -800) are developed using a crystalline lattice-confined strategy, aiming to gain efficient alkaline HER. It is found that Ru-W/WO2 -800 exhibits remarkable HER activity, characterized by a low overpotential (11 mV at 10 mA cm-2 ), notable mass activity (5863 mA mg-1 Ru at 50 mV), and robust stability (500 h at 250 mA cm-2 ). The highly efficient activity of Ru-W/WO2 -800 is attributed to the synergistic effect of Ru-W sites through ensemble catalysis. Specifically, the W sites expedite rapid hydroxyl transferring and water dissociation, while the Ru sites accelerate the hydrogen combination process, synergistically facilitating the HER activity. This study opens a promising pathway for tailoring the coordination environment of atomic-scale catalysts to achieve efficient electro-catalysis.

Direct Observation of Transition Metal Ions Evolving into Single Atoms: Formation and Transformation of Nanoparticle Intermediates.

Understanding the dynamical evolution from metal ions to single atoms is of great importance to the rational development of synthesis strategies for single atom catalysts (SACs) against metal sintering during pyrolysis. Herein, an in situ observation is disclosed that the formation of SACs is ascertained as a two-step process. There is initially metal sintering into nanoparticles (NPs) (500-600 °C), followed by the conversion of NPs into metal single atoms (Fe, Co, Ni, Cu SAs) at higher temperature (700-800 °C). Theoretical calculations together with control experiments based on Cu unveil that the ion-to-NP conversion can arise from the carbon reduction, and NP-to-SA conversion being steered by generating more thermodynamically stable Cu-N4 configuration instead of Cu NPs. Based on the evidenced mechanism, a two-step pyrolysis strategy to access Cu SACs is developed, which exhibits excellent ORR performance.

External-Shell Oxygen Enabling the Local Environment Modulation of Unsaturated NbN3 for Efficient Electrosynthesis of Hydrogen Peroxide.

Single-atom catalysts with a tunable coordination structure have shown grand potential in flexibly altering the selectivity of oxygen reduction reaction (ORR) toward the desired pathway. However, rationally mediating the ORR pathway by modulating the local coordination number of the single-metal sites is still challenging. Herein, we prepare the Nb single-atom catalysts (SACs) with an external-shell oxygen-modulated unsaturated NbN3 site in carbon nitride and the NbN4 site anchored in nitrogen-doped carbon carriers, respectively. Compared with typical NbN4 moieties for 4e- ORR, the as-prepared NbN3 SACs exhibit excellent 2e- ORR activity in 0.1 M KOH, with the onset overpotential close to zero (9 mV) and the H2O2 selectivity above 95%, making it one of the state-of-the-art catalysts in the electrosynthesis of hydrogen peroxide. Density functional theory (DFT) theoretical calculations indicate the unsaturated Nb-N3 moieties and the adjacent oxygen groups optimize the interface bond strength of pivotal intermediates (OOH*) for producing H2O2, thus accelerating the 2e- ORR pathway. Our findings may provide a novel platform for developing SACs with high activity and tunable selectivity.

High-Performance Styrene Epoxidation with Vacancy-Defect Cobalt Single-Atom Catalysts.

Exploring highly active and cost-effective catalysts for styrene epoxidation is of great significance, but it remains challenging to simultaneously achieve excellent conversion and selectivity toward styrene oxide. In this work, the structures and performance of Co, Fe, and Cu single-atom catalysts (SACs) in styrene epoxidation with tert-butyl hydroperoxide (TBHP) are predicted using density functional theory (DFT) calculations. The results reveal that the Co-N structure prefers that of styrene oxide over Fe-N and Cu-N structures. This predicted result is verified via catalytic evaluations, where the Co SACs displayed significantly higher styrene oxide selectivity than Fe and Cu SACs. Moreover, the activity of Co SAC can be further improved by the construction of unsaturated vacancy-defect cobalt single sites. As a result, excellent performance with styrene conversion of 99.9% and styrene oxide selectivity of 71% is achieved after a reaction time of 8 h on the optimal Co SAC.

Identification of Fenton-like active Cu sites by heteroatom modulation of electronic density.

Developing heterogeneous catalysts with atomically dispersed active sites is vital to boost peroxymonosulfate (PMS) activation for Fenton-like activity, but how to controllably adjust the electronic configuration of metal centers to further improve the activation kinetics still remains a great challenge. Herein, we report a systematic investigation into heteroatom-doped engineering for tuning the electronic structure of Cu-N4 sites by integrating electron-deficient boron (B) or electron-rich phosphorus (P) heteroatoms into carbon substrate for PMS activation. The electron-depleted Cu-N4/C-B is found to exhibit the most active oxidation capacity among the prepared Cu-N4 single-atom catalysts, which is at the top rankings of the Cu-based catalysts and is superior to most of the state-of-the-art heterogeneous Fenton-like catalysts. Conversely, the electron-enriched Cu-N4/C-P induces a decrease in PMS activation. Both experimental results and theoretical simulations unravel that the long-range interaction with B atoms decreases the electronic density of Cu active sites and down-shifts the d-band center, and thereby optimizes the adsorption energy for PMS activation. This study provides an approach to finely control the electronic structure of Cu-N4 sites at the atomic level and is expected to guide the design of smart Fenton-like catalysts.

Biocompatible Ruthenium Single-Atom Catalyst for Cascade Enzyme-Mimicking Therapy.

Rationally constructing single-atom enzymes (SAEs) with superior activity, robust stability, and good biocompatibility is crucial for tumor therapy but still remains a substantial challenge. In this work, we adopt biocompatible carbon dots as the carrier material to load Ru single atoms, achieving Ru SAEs with superior multiple enzyme-like activity and stability. Ru SAEs behave as oxidase, peroxidase, and glutathione oxidase mimics to synchronously catalyze the generation of reactive oxygen species (ROS) and the depletion of glutathione, thus amplifying the ROS damage and finally causing the death of cancer cells. Notably, Ru SAEs exhibit excellent peroxidase-like activity with a specific activity of 7.5 U/mg, which surpasses most of the reported SAEs and is 20 times higher than that of Ru/C. Theoretical results reveal that the electrons of the Ru 4d orbital in Ru SAEs are transferred to O atoms in H2O2 and then efficiently activate H2O2 to produce •OH. Our work may provide some inspiration for the design of SAEs for cancer therapy.

Boosting OER performance of IrO2 in acid via urchin-like hierarchical-structure design.

Urchin-like hierarchical IrO2 nanostructures, which are obtained by a surfactant-free, wet-chemical approach, show boosted OER performance in acid with an overpotential of 260 mV @10 mA cm-2geo under optimal pocessing conditions. The overpotential @10 mA cm-2geo can be kept below 285 mV for over 30 hours.

Stimuli-Responsive Manganese Single-Atom Nanozyme for Tumor Therapy via Integrated Cascade Reactions.

The single-atom enzyme (SAE) is a novel type of nanozyme that exhibits extraordinary catalytic activity. Here, we constructed a PEGylated manganese-based SAE (Mn/PSAE) by coordination of single-atom manganese to nitrogen atoms in hollow zeolitic imidazolate frameworks. Mn/PSAE catalyzes the conversion of cellular H2 O2 to . OH through a Fenton-like reaction; it also promotes the decomposition of H2 O2 to O2 and continuously catalyzes the conversion of O2 to cytotoxic . O2- via oxidase-like activity. The catalytic activity of Mn/PSAE is more pronounced in the weak acidic tumor environment; therefore, these cascade reactions enable the sufficient generation of reactive oxygen species (ROS) and effectively kill tumor cells. The prominent photothermal conversion property of the amorphous carbon can be utilized for photothermal therapy. Hence, Mn/PSAE exhibits significant therapeutic efficacy through tumor microenvironment stimulated generation of multiple ROS and photothermal activity.

Coplanar Pt/C Nanomeshes with Ultrastable Oxygen Reduction Performance in Fuel Cells.

Developing highly stable and efficient catalysts toward the oxygen reduction reaction is important for the long-term operation in proton exchange membrane fuel cells. Reported herein is a facile synthesis of two-dimensional coplanar Pt-carbon nanomeshes (NMs) that are composed of highly distorted Pt networks (neck width of 2.05±0.72 nm) and carbon. X-ray absorption fine structure spectroscopy demonstrated the metallic state of Pt in the coplanar Pt/C NMs. Fuel cell tests verified the excellent activity of the coplanar Pt/C NM catalyst with the peak power density of 1.21 W cm-2 and current density of 0.360 A cm-2 at 0.80 V in the H2 /O2 cell. Moreover, the coplanar Pt/C NM electrocatalysts showed superior stability against aggregation, with NM structures preserved intact for a long-term operation of over 30 000 cycles for electrode measurement, and the working voltage loss was negligible after 120 h in the H2 /O2 single cell operation. Density-functional theory analysis indicates the increased vacancy formation energy of Pt atoms for coplanar Pt/C NMs, restraining the tendency of Pt dissolution and aggregation.

2D PbS Nanosheets with Zigzag Edges for Efficient CO2 Photoconversion.

The rational design of transition-metal sulfide with two-dimensional (2D) structure and tunable edges on the nanoscale can effectively improve their activity for variously catalytic reactions. Herein, the 2D PbS nanosheets with abundant zigzag edges (e-PbS NS), which exhibited an excellent performance for CO2 photoconversion to CO, were constructed. The zigzag edges on the PbS NS are beneficial for exposing more active sites and promoting charge separation, thereby accelerating the kinetics process of CO2 photoreduction. This study provides a strategy to regulate structure with effective edge sites for the CO2 reduction.

In Situ Topotactic Transformation of an Interstitial Alloy for CO Electroreduction.

Electrochemical reduction of CO to value-added products holds promise for storage of energy from renewable sources. Copper can convert CO into multi-carbon (C2+ ) products during CO electroreduction. However, developing a Cu electrocatalyst with a high selectivity for CO reduction and desirable production rates for C2+ products remains challenging. Herein, highly lattice-disordered Cu3 N with abundant twin structures as a precursor electrocatalyst is examined for CO reduction. Through in situ activation during the CO reduction reaction (CORR) and concomitant release of nitrogen, the obtained metallic Cu° catalyst particles inherit the lattice dislocations present in the parent Cu3 N lattice. The de-nitrified catalyst delivers an unprecedented C2+ Faradaic efficiency of over 90% at a current density of 727 mA cm-2 in a flow cell system. Using a membrane electrode assembly (MEA) electrolyzer with a solid-state electrolyte (SSE), a 17.4 vol% ethylene stream and liquid streams with concentration of 1.45 m and 230 × 10-3 m C2+ products at the outlet of the cathode and SSE-containment layer are obtained.

Ionic Exchange of Metal-Organic Frameworks for Constructing Unsaturated Copper Single-Atom Catalysts for Boosting Oxygen Reduction Reaction.

Regulating the coordination environment of atomically dispersed catalysts is vital for catalytic reaction but still remains a challenge. Herein, an ionic exchange strategy is developed to fabricate atomically dispersed copper (Cu) catalysts with controllable coordination structure. In this process, the adsorbed Cu ions exchange with Zn nodes in ZIF-8 under high temperature, resulting in the trapping of Cu atoms within the cavities of the metal-organic framework, and thus forming Cu single-atom catalysts. More importantly, altering pyrolysis temperature can effectively control the structure of active metal center at atomic level. Specifically, higher treatment temperature (900 °C) leads to unsaturated Cu-nitrogen architecture (CuN3 moieties) in atomically dispersed Cu catalysts. Electrochemical test indicates atomically dispersed Cu catalysts with CuN3 moieties possess superior oxygen reduction reaction performance than that with higher Cu-nitrogen coordination number (CuN4 moieties), with a higher half-wave potential of 180 mV and the 10 times turnover frequency than that of CuN4 . Density functional theory calculation analysis further shows that the low N coordination number of Cu single-atom catalysts (CuN3 ) is favorable for the formation of O2 * intermediate, and thus boosts the oxygen reduction reaction.

Construction of highly accessible single Co site catalyst for glucose detection.

The development of high-performance glucose sensors is an urgent need, especially for diabetes mellitus diagnosis. However, the glucose monitoring is conventionally operated in an invasive finger-prick manner and their noninvasive alternatives largely suffered from the relatively poor sensitivity, selectivity, and stability, resulted from the lack of robust and efficient catalysts. In this paper, we design a concave shaped nitrogen-doped carbon framework embellished with single Co site catalyst (Co SSC) by selectively controlling the etching rate on different facet of carbon substrate, which is beneficial to the diffusion and contact of analyte. The Co SSC prompts a significant improvement in the sensitivity of the solution-gated graphene transistor (SGGT) devices, with three orders of magnitude better than those of SGGT devices without catalysts. Our findings expand the field of single site catalyst in the application of biosensors, diabetes diagnostics and personalized health-care monitoring.

Interfacial Engineering of W2 N/WC Heterostructures Derived from Solid-State Synthesis: A Highly Efficient Trifunctional Electrocatalyst for ORR, OER, and HER.

To meet the practical demand of overall water splitting and regenerative metal-air batteries, highly efficient, low-cost, and durable electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are required to displace noble metal catalysts. In this work, a facile solid-state synthesis strategy is developed to construct the interfacial engineering of W2 N/WC heterostructures, in which abundant interfaces are formed. Under high temperature (800 °C), volatile CNx species from dicyanodiamide are trapped by WO3 nanorods, followed by simultaneous nitridation and carbonization, to form W2 N/WC heterostructure catalysts. The resultant W2 N/WC heterostructure catalysts exhibit an efficient and stable electrocatalytic performance toward the ORR, OER, and HER, including a half-wave potential of 0.81 V (ORR) and a low overpotential at 10 mA cm-2 for the OER (320 mV) and HER (148.5 mV). Furthermore, a W2 N/WC-based Zn-air battery shows outstanding high power density (172 mW cm-2 ). Density functional theory and X-ray absorption fine structure analysis computations reveal that W2 N/WC interfaces synergistically facilitate transport and separation of charge, thus accelerating the electrochemical ORR, OER, and HER. This work paves a novel avenue for constructing efficient and low-cost electrocatalysts for electrochemical energy devices.

Atomically Dispersed Pt on Screw-like Pd/Au Core-shell Nanowires for Enhanced Electrocatalysis.

Engineering noble metal nanostructures at the atomic level can significantly optimize their electrocatalytic performance and remarkably reduce their usage. We report the synthesis of atomically dispersed Pt on screw-like Pd/Au nanowires by using ultrafine Pd nanowires as seeds. Au can selectively grow on the surface of Pd nanowires by an island growth pattern to fabricate surface defect sites to load atomically dispersed Pt, which can be confirmed by X-ray absorption fine structure measurements and aberration corrected HRTEM images. The nanowires with 2.74 at % Pt exhibit superior HER properties in acidic solution with an overpotential of 20.6 mV at 10 mA cm-2 and enhanced alkaline ORR performance with a mass activity over 15 times greater than the commercial platinum/carbon (Pt/C) catalysts.