Aggregated coordination polymers of Ag+ with a cysteine derivative ligand containing an AIEgen.

We investigated coordination polymers of Ag+ with a cysteine-based thiol ligand designed to contain a tetraphenylethylene AIEgen (L- and D-1). The coordination polymers, forming in a variety of protic and aprotic organic solvents, such as THF, CH3CN and CH3OH, were shown to undergo aggregation in H2O/THF binary solvents at water volume fractions above 50%, where emission was substantially enhanced while the CD profile was reversed, yet the dependence of the CD signal on ee remained S-shaped for the polymers in the aprotic organic solvents THF and CH3CN, in contrast to that in protic solvents CH3OH and C2H5OH.

High-Performance Photoelectrochemical Water Oxidation with Phosphorus-Doped and Metal Phosphide Cocatalyst-Modified g-C3 N4 Formation Through Gas Treatment.

Graphitic carbon nitride (g-C3 N4 ) has been widely explored as a photocatalyst for water splitting. The anodic water oxidation reaction (WOR) remains a major obstacle for such processes, with issues such as low surface area of g-C3 N4 , poor light absorption, and low charge-transfer efficiency. In this work, such longtime concerns have been partially addressed with band gap and surface engineering of nanostructured graphitic carbon nitride (g-C3 N4 ). Specifically, surface area and charge-transfer efficiency are significantly enhanced through architecting g-C3 N4 on nanorod TiO2 to avoid aggregation of layered g-C3 N4 . Moreover, a simple phosphide gas treatment of TiO2 /g-C3 N4 configuration not only narrows the band gap of g-C3 N4 by 0.57 eV shifting it into visible range but also generates in situ a metal phosphide (M=Fe, Cu) water oxidation cocatalyst. This TiO2 /g-C3 N4 /FeP configuration significantly improves charge separation and transfer capability. As a result, our non-noble-metal photoelectrochemical system yields outstanding visible light (>420 nm) photocurrent: approximately 0.3 mA cm-2 at 1.23 V and 1.1 mA cm-2 at 2.0 V versus RHE, which is the highest for a g-C3 N4 -based photoanode. It is expected that the TiO2 /g-C3 N4 /FeP configuration synthesized by a simple phosphide gas treatment will provide new insight for producing robust g-C3 N4 for water oxidation.

Fe2 PO5 -Encapsulated Reverse Energetic ZnO/Fe2 O3 Heterojunction Nanowire for Enhanced Photoelectrochemical Oxidation of Water.

Zinc oxide is regarded as a promising candidate for application in photoelectrochemical water oxidation due to its higher electron mobility. However, its instability under alkaline conditions limits its application in a practical setting. Herein, we demonstrate an easily achieved wet-chemical route to chemically stabilize ZnO nanowires (NWs) by protecting them with a thin layer Fe2 O3 shell. This shell, in which the thickness can be tuned by varying reaction times, forms an intact interface with ZnO NWs, thus protecting ZnO from corrosion in a basic solution. The reverse energetic heterojunction nanowires are subsequently activated by introducing an amorphous iron phosphate, which substantially suppressed surface recombination as a passivation layer and improved photoelectrochemical performance as a potential catalyst. Compared with pure ZnO NWs (0.4 mA cm-2 ), a maximal photocurrent of 1.0 mA cm-2 is achieved with ZnO/Fe2 O3 core-shell NWs and 2.3 mA cm-2 was achieved for the PH3 -treated NWs at 1.23 V versus RHE. The PH3 low-temperature treatment creates a dual function, passivation and catalyst layer (Fe2 PO5 ), examined by X-ray photoelectron spectroscopy, TEM, photoelectrochemical characterization, and impedance measurements. Such a nano-composition design offers great promise to improve the overall performance of the photoanode material.

Assembly of g-C3N4-based type II and Z-scheme heterojunction anodes with improved charge separation for photoelectrojunction water oxidation.

Graphitic carbon nitride (g-C3N4) has been widely studied as a metal-free photocatalyst, leading to some excellent results; however, the rapid recombination of photogenerated charge carriers substantially limits its performance. Here, we establish two types of g-C3N4-based heterojunction (type II and nonmediator assisted Z-scheme) photoanodes on a transparent conducting substrate via coupling with rod-like and nanoparticulate WO3, respectively. In these composites, g-C3N4 film grown by electrophoretic deposition of exfoliated g-C3N4 serves as the host or guest material. The optimized type II WO3/g-C3N4 composite exhibits an enhanced photocurrent of 0.82 mA cm-2 at 1.23 V vs. RHE and an incident photo-to-current conversion efficiency (IPCE) of 33% as compared with pure WO3 nanorods (0.22 mA cm-2 for photocurrent and 15% for IPCE). Relative to pure g-C3N4 film (with a photocurrent of several microampere and an IPCE of 2%), a largely improved photocurrent of 0.22 mA cm-2 and an IPCE of 20% were acquired for the Z-scheme g-C3N4/WO3 composite. The enhancement can be attributed to accelerated charge separation in the heterointerface because of the suitably aligned band gap between WO3 and g-C3N4, as confirmed by optical spectroscopy and ultraviolet photoelectron spectroscopy (UPS) analysis. The photocatalytic process and mechanism of the g-C3N4-based heterojunctions are proposed herein, which potentially explain the origin of the enhanced photoelectrochemical performance. This achievement and the fundamental information supplied here indicate the importance of rationally designing heterojunction photoelectrodes to improve the performance of semiconductors. This is particularly important for materials such as pure g-C3N4 and WO3, as their photoactivities are strongly restricted by high recombination rates.

A nanostructured hematite film prepared by a facile "top down" method for application in photoelectrochemistry.

To overcome tough conditions currently used for the preparation of nanostructured hematite films on a conducting substrate, a rational and easy method of chemical etching involving Fe3+ release and material growth in the presence of OH- has been developed. By carefully tuning the parameters influencing the morphologies of hematite, including the synthetic procedure, the concentration of etching solution, temperature, etching time and the morphology controlling surfactant, hematite films grown on iron foil with various morphologies (e.g. nanorod, nanowire, ultrathin nanoflake and cauliflower-like shape) have been achieved. In particular, it is found that F- is an effective surfactant to control the morphology as well as the crystallization process of hematite. Ultrathin nanoflakes having a minimized feature size exhibit the best photocurrent of 0.5 mA cm-2 (1.23 V vs. RHE, RHE is reversible hydrogen electrode) among the samples tested as a result of facilitated hole diffusion to the electrolyte and thus lowered carrier recombination. Compared with pristine hematite, a nearly tripled photocurrent is observed when H2O2 is added in the electrolyte as a hole scavenger, suggesting the presence of a charge injection barrier in the surface of samples. According to this, the strategy of Co2+ treatment is utilized and the improved photocurrent is seen, likely due to the improved water oxidation kinetics and surface state passivation. We believe that this convenient and economical method can be extended to the synthesis of other alkaline metal oxide nanomaterials as long as the redox potential of S2O82-/SO42- is higher than Mn+/M (M refers to metal).

Regulation of the stromal cell-derived factor-1alpha-CXCR4 axis in human dental pulp cells.

INTRODUCTION: Although the presence of the stromal cell-derived factor (SDF)-1alpha-CXCR4 axis has been reported in dental pulp tissue, little has been known about the underlying regulation of this axis in dental pulp stem cells (DPSCs). The purpose of this study was to investigate whether inflammation or hypoxia can regulate this axis in cultured human dental pulp cells (DPCs). METHODS: Primary cultures of DPCs were stimulated by various concentrations of lipopolysaccharide (LPS) for 48 hours, and the production of SDF-1alpha or CXCR4 was assessed through the enzyme-linked immunosorbent assay and Western blotting, respectively. Additionally, DPCs were incubated in a hypoxic condition (1% O(2)) for 24 hours, and the cell proliferation ability was detected by methylthiazol tetrazolum assay. Quantitative reverse-transcription polymerase chain reaction (RT-PCR) was used to observe messenger RNA level changes of hypoxia inducible factor-1alpha(HIF-alpha), SDF-1alpha, and CXCR4. The effects of hypoxia on cell migration ability were further confirmed by transmigration assay. RESULTS: All concentrations of LPS inhibited SDF-1alpha production except that 1 microg/mL LPS increased the expression of CXCR4. Hypoxia promoted the proliferation of DPCs in a 24-hour culture period. Quantitative RT-PCR showed that messenger RNA levels of HIF-alpha and CXCR4 increased, whereas SDF-1alpha decreased in hypoxic DPCs. Transmigration assay indicated that hypoxia increased the migration ability of DPCs. CONCLUSIONS: These results suggested that inflammation and hypoxia might play an important role in regulating the SDF-1alpha-CXCR4 axis, which further recruits DPSCs to participate in reparative dentinogenesis.