ABSTRACT
INTRODUCTION: Etching is necessary to expose the fibers and enable both mechanical and chemical bonding of the resin core to the fiber post. This study evaluated the effect of concentration and application time of hydrogen peroxide on the surface topography and bond strength of glass fiber posts to resin cores. METHODS: Fiber posts were etched with 24% or 50% hydrogen peroxide for 1, 5, or 10 min (n = 10). Posts without any treatment were used as a control. After etching, the posts were silanated and adhesive resin was applied. The posts were positioned into a mold to allow a self-cured resin core to be inserted. The post/resin assembly was serially sectioned into five beams that were subjected to a tensile bond strength test. Data were subjected to two-way ANOVA and Tukey test (α = 0.05). The surface topography was analyzed using scanning electronic microscopy. RESULTS: Non-etched post presents a relatively smooth surface without fiber exposure. Application of hydrogen peroxide increased the surface roughness and exposed the fibers. All experimental conditions yielded similar bond strength values that were higher than those obtained in the control group. CONCLUSION: Both 24% and 50% hydrogen peroxide exposure increased the bond strength of resin to the posts, irrespective of the application time.
Subject(s)
Dental Etching/methods , Glass/chemistry , Hydrogen Peroxide/chemistry , Oxidants/chemistry , Bisphenol A-Glycidyl Methacrylate/chemistry , Composite Resins/chemistry , Dental Bonding , Epoxy Resins/chemistry , Humans , Hydrogen Peroxide/administration & dosage , Materials Testing , Methacrylates/chemistry , Microscopy, Electron, Scanning , Oxidants/administration & dosage , Polyethylene Glycols/chemistry , Polymethacrylic Acids/chemistry , Post and Core Technique/instrumentation , Quartz/chemistry , Resin Cements/chemistry , Silanes/chemistry , Stress, Mechanical , Surface Properties , Tensile Strength , Time FactorsABSTRACT
PURPOSE: The aim of this study was to evaluate the effect of endodontic and restorative treatment on the fracture resistance of posterior teeth. MATERIALS AND METHODS: Fifty intact premolars were selected and randomly placed into five groups (n = 10): G1, intact teeth (control); G2, mesial-occlusal-distal (MOD) preparation; G3, MOD preparation restored with composite resin (Z-250, 3M ESPE); G4, MOD preparation and endodontic treatment; and G5, MOD preparation, endodontic treatment, and composite resin restoration. The specimens were submitted to an axial compression load in a mechanical test machine (EMIC), at a speed of 0.5 mm/min. Fracture patterns were analyzed at four levels. Five 2D numerical models were created by Ansys 10.0 for finite element analysis (FEA). RESULTS: Mean values of compressive strength for all groups were (Kgf): G1 (83.6 +/- 25.4); G2 (52.7 +/- 20.2); G3 (82.1 +/- 24.9); G4 (40.2 +/- 14.2); G5 (64.5 +/- 18.1). Statistical analysis (ANOVA and Tukey's test) showed that fracture resistance of G1 was significantly higher than that of G5, G2, and G4. Resistance of G3 was also higher than that of G2 and G4. Results showed that the tooth resistance is completely maintained when MOD preparation is restored with composite resin and partially recovered when MOD preparation associated with an endodontic access is restored in the same way. The endodontic treatment and composite resin restoration influenced stress distribution in the dental structure. CONCLUSIONS: Composite resin restoration plays an important role in recovering tooth strength. With regard to fracture mode, restoration and endodontic treatment increased the incidence of periodontal involvement, which was demonstrated by association with the finite element mechanical test method.