Editorial on Special Issues "Aerogels" and "Aerogels 2018".

Aerogels can be defined as ultralight materials with a 3D porous structure, similar to their parent wet gels, where the solvent has been replaced by a gas without a collapse of the gel structure, thanks to the drying process used (supercritical CO2 drying, freeze drying, etc.). (...).

Original synthesis and spectroscopic study of thiophene triazine derivatives with enhanced luminescence properties.

A straightforward access to π-conjugated oligothiophenes bearing amino-rich groups was developed. Palladium-catalyzed C-H arylation applied in the main step of the synthesis allowed to couple 2-thiophenecarbonitriles and aryl bromides with moderate to excellent yields (35-93%). Then, to improve their basic fluorescence properties, these compounds were transformed into their 2,4-diamino-1,3,5-triazine derivatives, also with good to excellent yields (74-98%). UV-Visible absorption and fluorescence studies identified a strongly emissive molecule (fluorescence quantum yield: ΦF = 0.78 ±â€¯0.05), which could find use in sensors for applications in biology and in material chemistry. We observed an antagonistic effect in the spectroscopic properties of oligothiophenes bearing 2,4-diamino-1,3,5-triazine, resulting in improved absorptive and emissive properties for more constrained structures having shorter oligothiophenes chains.

Evaluation of the super disintegrant functionnalities of alginic acid and calcium alginate for the design of orodispersible mini tablets.

This study explores the influence of different synthesis methods and drying conditions in the preparation of sodium alginate-derivate xerogels presenting interesting disintegrant functionalities. Xerogels containing alginic acid (AA) or calcium alginate (CaA) and a mixture of both, AA/CaA, were isolated using two different drying methods oven and rotary evaporation. AA showed the best wettability behavior, in contrast to the rigid crosslinked CaA structure which showed a limited rate of water penetration. Interestingly, xerogel containing AA dried in the oven showed an enhanced maximum water uptake. Oven drying seems to favor the isolation of materials presenting good tabletability. Compression parameters of the formulations (tensile strength, elastic energy and porosity) were not affected by their presence (5%) in the design of OroDispersible Mini Tablets. In vitro disintegration results highlighted the water wicking as the key factor leading the disintegration mechanism of these materials. These results show promise of potential properties for the development of super disintegrant excipients.

Sodium and acidic alginate foams with hierarchical porosity: Preparation, characterization and efficiency as a dye adsorbent.

A novel approach for the preparation of sodium alginate foams by ice-templating, followed by freeze-drying was described. Important effects of the preparation parameters on the macroporous structure of the final materials could be evidenced. A functionalization procedure for the preparation of acidified macro/meso-porous foams with high surface area was optimized and the efficiency of one alginic acid foam was demonstrated for the adsorption of a basic dye (methylene blue) from aqueous solution. The comparison of the maximum monolayer adsorption capacity of this adsorbent with the values already reported for other biosorbents clearly identified alginic acid foams as competitive sorbents for the removal of methylene blue from aqueous solutions.

Boronic acid-modified alginate enables direct formation of injectable, self-healing and multistimuli-responsive hydrogels.

One-step functionalization of alginate with boronic acid groups allowed spontaneous formation of biocompatible hydrogels under basic conditions without additional complementary molecules or crosslinking agents. The dynamic nature of boronate ester bonds formed with vicinal diols present on alginate pyranose rings provided remarkable self-healing, injectable and multi-stimuli responsive properties to the material.

Keratin Protein-Catalyzed Nitroaldol (Henry) Reaction and Comparison with Other Biopolymers.

Here we describe a preliminary investigation on the ability of natural keratin to catalyze the nitroaldol (Henry) reaction between aldehydes and nitroalkanes. Both aromatic and heteroaromatic aldehydes bearing strong or moderate electron-withdrawing groups were converted into the corresponding ß-nitroalcohol products in both DMSO and in water in the presence of tetrabutylammonium bromide (TBAB) as a phase transfer catalyst. Negligible background reactions (i.e., negative control experiment in the absence of keratin protein) were observed in these solvent systems. Aromatic aldehydes bearing electron-donating groups and aliphatic aldehydes showed poor or no conversion, respectively. In general, the reactions in water/TBAB required twice the amount of time than in DMSO to achieve similar conversions. Moreover, comparison of the kinetics of the keratin-mediated nitroaldol (Henry) reaction with other biopolymers revealed slower rates for the former and the possibility of fine-tuning the kinetics by appropriate selection of the biopolymer and solvent.

Composition, texture and methane potential of cellulosic residues from Lewis acids organosolv pulping of wheat straw.

Cellulosic pulps have been successfully isolated from wheat straw through a Lewis acids organosolv treatment. The use of Lewis acids with different hardness produced pulps with different delignification degrees. The cellulosic residue was characterised by chemical composition, X-ray diffraction, FT-IR spectroscopy, N2 physisorption, scanning electron microscopy and potential for anaerobic digestibility. Surface area and pore volume increased with the hardness of the Lewis acid, in correspondence with the decrease of the amount of lignin and hemicellulose in the pulp. The non linearity of the correlation between porosity and composition suggests that an agglomeration of cellulose fibrils occurs in the early stages of pulping. All organosolv pulps presented a significantly higher methane potential than the parent straw. A methane evolution of 295Ncm(3)/g OM was reached by a moderate improvement of the accessibility of the native straw.

Complexation of Trivalent Metal Cations to Mannuronate Type Alginate Models from a Density Functional Study.

Complexation of alginate models, built of ß-d-mannuronic units (M) linked by a 1-4 glycosidic bridge, to Al(3+), Sc(3+), Cr(3+), Fe(3+), Ga(3+), and La(3+) cations was studied by applying the quantum chemical density functional theory (DFT) based method. The binding modes and energies were obtained for complexes with one, two, and three truncated alginate chain(s). In all the hydrated structures a monodentate binding mode is established to be the energetically most favored with shorter M(3+)···O(COO(-)) bonds than M(3+)···O(OH) bonds. Coordination bond lengths are found to be specific to each cation and to depend very little on the water in the coordination sphere and on the number of saccharide units used to model an alginate chain. The binding energy tendency Fe(3+) ≈ Cr(3+) > Al(3+) ≈ Ga(3+) ≫ Sc(3+) ≥ La(3+) is not affected by the alginate models, the coordination to water molecules, and the number of chains. A significant covalent contribution that arises predominantly from a charge donation from the carboxylate oxygen to the metal cation was established from the orbital population analysis. An exothermic chain-chain association is predicted by the computed enthalpy variations. A comparison between the structural features of alginate complexation to trivalent and divalent cations is provided and discussed.

Sorption of Cu(II) Ions on Chitosan-Zeolite X Composites: Impact of Gelling and Drying Conditions.

Chitosan-zeolite Na-X composite beads with open porosity and different zeolite contents were prepared by an encapsulation method. Preparation conditions had to be optimised in order to stabilize the zeolite network during the polysaccharide gelling process. Composites and pure reference components were characterized using X-ray diffraction (XRD); scanning electron microscopy (SEM); N2 adsorption-desorption; and thermogravimetric analysis (TG). Cu(II) sorption was investigated at pH 6. The choice of drying method used for the storage of the adsorbent severely affects the textural properties of the composite and the copper sorption effectiveness. The copper sorption capacity of chitosan hydrogel is about 190 mg·g(-1). More than 70% of this capacity is retained when the polysaccharide is stored as an aerogel after supercrititcal CO2 drying, but nearly 90% of the capacity is lost after evaporative drying to a xerogel. Textural data and Cu(II) sorption data indicate that the properties of the zeolite-polysaccharide composites are not just the sum of the properties of the individual components. Whereas a chitosan coating impairs the accessibility of the microporosity of the zeolite; the presence of the zeolite improves the stability of the dispersion of chitosan upon supercritical drying and increases the affinity of the composites for Cu(II) cations. Chitosan-zeolite aerogels present Cu(II) sorption properties.

Organosolv Lignin-Based Wood Adhesive. Influence of the Lignin Extraction Conditions on the Adhesive Performance.

Ethanol organosolv alfa grass lignins were extracted in the presence of sulfuric acid or Lewis acids (Sc(OTf)3, FeCl3) as catalysts and subjected to a comprehensive structural characterization by solid state 13C NMR, GPC, MALDI-TOF, and ASAP-MS/MS. The impact of the severity of the treatment and of the nature of the acid catalyst on the recovered lignin structure was investigated. The lignins isolated at high severity were highly recondensed and partly composed of regular structures composed of furan-like rings. The alfa (Stipa tenacissima L.) organosolv lignins were used for the preparation of formaldehyde-free adhesives which were characterized by TMA and used for the preparation of particleboard without any addition of synthetic resin. It has been demonstrated for the first time that: (1) the addition of 10% to 30% of organosolv alfa lignin in a tannin-based adhesive improved the adhesive performance; and (2) the conditions of the lignin extraction strongly impact the lignin-based adhesive performances. The highly recondensed lignin extracted with sulfuric acid as a catalyst allowed the production of resins with improved performances. Formulations composed of 50% glyoxalated alfa lignin and 50% of Aleppo Pine tannins yielded good internal bond strength results for the panels (IB = 0.45 MPa) and satisfied relevant international standard specifications for interior-grade panels.

DNA-catalyzed Henry reaction in pure water and the striking influence of organic buffer systems.

In this manuscript we report a critical evaluation of the ability of natural DNA to mediate the nitroaldol (Henry) reaction at physiological temperature in pure water. Under these conditions, no background reaction took place (i.e., control experiment without DNA). Both heteroaromatic aldehydes (e.g., 2-pyridinecarboxaldehyde) and aromatic aldehydes bearing strong or moderate electron-withdrawing groups reacted satisfactorily with nitromethane obeying first order kinetics and affording the corresponding ß-nitroalcohols in good yields within 24 h. In contrast, aliphatic aldehydes and aromatic aldehydes having electron-donating groups either did not react or were poorly converted. Moreover, we discovered that a number of metal-free organic buffers efficiently promote the Henry reaction when they were used as reaction media without adding external catalysts. This constitutes an important observation because the influence of organic buffers in chemical processes has been traditionally underestimated.

Mesoporosity changes from cambium to mature tension wood: a new step toward the understanding of maturation stress generation in trees.

In order to progress in the understanding of mechanical stress generation, the mesoporosity of the cell wall and its changes during maturation of poplar (Populus deltoides × P. nigra) tension wood (TW) and opposite wood (OW) were measured by nitrogen adsorption-desorption. Variations in the thickness of the gelatinous layer (G-layer) were also measured to clarify whether the mesoporosity change simultaneously with the deposition of the G-layer in TW. Results show that mesoporous structures of TW and OW were very similar in early development stages before the deposition of G-layers. With the formation of the S2 layer in OW and the G-layer in TW, the mesopore volume decreased steeply before lignification. However, in TW only, the decrease in mesopore volume occurred together with the pore shape change and a progressive increase in pore size. The different patterns observed in TW revealed that pores from G-layers appear with a different shape compared to those of the compound middle lamella, and their size increases during the maturation process until stabilising in mature wood. This observation strongly supports the hypothesis of the swelling of the G-layer matrix during maturation as the origin of maturation stress in poplar tension wood.

Influence of both cation and alginate nature on the rheological behavior of transition metal alginate gels.

The rheological properties of several ionotropic alginate hydrogels were investigated according to the nature of the divalent cation (Mn(2+), Co(2+), Cu(2+)) and the guluronic fraction of the alginate (HG and LG for "high G-content" and "low G-content"). Six hydrogels (Mn-LG, Mn-HG, Co-LG, Co-HG, Cu-LG and Cu-HG) were synthesized and studied by spectromechanical analyses. On one hand, Cu-HG, Cu-LG and Co-HG behaved as viscoelastic solids: the elastic contribution was higher than the dissipative component in all the frequency range studied (G'>G"). No flow zone (G">G') was detected even at very low values of the shearing frequency. On the other, Mn-HG, Mn-LG and Co-LG presented a spectromechanical behavior that resembled that observed classically for entangled polymers. Indeed, at high frequency, these latter materials could be compared to a viscoelastic solid but at low frequency, the flow zone was described and the viscous character became prevalent with finite relaxation time. Very good correlations with the microscopic structurations of the network were evidenced (rubbery vs. flow zone and fibrillar vs. complex morphology respectively).

Structure of alginate gels: interaction of diuronate units with divalent cations from density functional calculations.

The complexation of (1→4) linked α-L-guluronate (G) and ß-D-mannuronate (M) disaccharides with Mg(2+), Ca(2+), Sr(2+), Mn(2+), Co(2+), Cu(2+), and Zn(2+) cations have been studied with quantum chemical density functional theory (DFT)-based method. A large number of possible cation-diuronate complexes, with one and two GG or MM disaccharide units and with or without water molecules in the inner coordination shells have been considered. The computed bond distances, cation interaction energies, and molecular orbital composition analysis revealed that the complexation of the transition metal (TM) ions to the disaccharides occurs via the formation of strong coordination-covalent bonds. On the contrary, the alkaline earth cations form ionic bonds with the uronates. The unidentate binding is found to be the most favored one in the TM hydrated and water-free complexes. By removing water molecules, the bidentate chelating binding also occurs, although it is found to be energetically less favored by 1 to 1.5 eV than the unidentate one. A good correlation is obtained between the alginate affinity trend toward TM cations and the interaction energies of the TM cations in all studied complexes, which suggests that the alginate affinities are strongly related to the chemical interaction strength of TM cations-uronate complexes. The trend of the interaction energies of the alkaline earth cations in the ionic complexes is opposite to the alginate affinity order. The binding strength is thus not a limiting factor in the alginate gelation in the presence of alkaline earth cations at variance with the TM cations.

New solid lipid microparticles for controlled ibuprofen release: formulation and characterization study.

A hot melt dispersion method was used to prepare new sustained release ibuprofen composite microparticles of a solid lipid at ambient temperature, cetyl alcohol. The dispersion of colloidal silicon dioxide nanoparticles (hydrophilic Aerosil 200 or hydrophobic Aerosil R974) either in the oily phase or in the aqueous phase led to the preparation of large (about 400 µm diameter) surfactant free free-flowing particles. Mapping-scanning electronic microscopy using silicon probe revealed that silicon was in the oily core in all cases. The nature of silica nanoparticles and the way used for their dispersion influenced the internal structure of the composite microparticles and the aggregation of nanoparticles in the core of the microparticles. Hydrophobic Aerosil R974 allowed the formation of homogeneous microparticles. Although silica nanoparticles had no influence on thermic profile, crystalline state of ibuprofen and lipid, they had an influence on the kinetics drug release related to the increase of the size of the composite solid lipid microparticles prepared.

Structural regime identification in ionotropic alginate gels: influence of the cation nature and alginate structure.

The morphologies of several ionotropic alginate hydrogels and aerogels were investigated by SAXS according to the nature of the divalent metal cation (Mn(2+), Co(2+), Zn(2+), Cu(2+)) and the guluronic fraction of the alginate. All alginate hydrogel and aerogel samples show isotropic small-angle X-ray scattering. Gelation results from cooperative associations of cations and chain segments and yields different nanostructures, that is, nanofibrillar morphology or multiple junction morphology, according to cation type and eventually mannuronic/guluronic ratio. Therefore, Mn and Cu gels present the same morphology whatever the guluronic ratio, whereas Co and Zn gels yield different nanostructures. In the size range investigated by SAXS (~10-200 Å), the structure of aerogels obtained by CO(2) supercritical drying is found to be inherited from the morphology of the parent hydrogel whatever the initial structural regime.

Marine polysaccharides and their conversion into functional materials.

Natural polysaccharides are supports for sensors, absorbents and catalysts. They are also gelling agents in the aqueous phase, due to the high level of dispersion of hydrocolloids. This article focuses on an effective method to prepare dry materials which retain the dispersion of the polymer hydrogel, namely polysaccharide aerogels. The diverse surface functionalities like hydroxy, carboxy or amino groups of the polysaccharide aerogels are accessible to catalysts and reactants and can be easily modified to tune the functionality of the materials.

Chitosan aerogel: a recyclable, heterogeneous organocatalyst for the asymmetric direct aldol reaction in water.

Aerogel microspheres of chitosan, an abundant biopolymer obtained from marine crustaceans, have been successfully applied to catalyze the asymmetric aldol reaction in water, providing the products in high yields and with good stereoselectivity (up to 93% ee) and recyclability (up to 4 runs). Yields were favourably affected by additives such as DNP and stearic acid.

Enantioselectivity induced by oxazaborolidine supported on mesoporous silica or by its analog in homogeneous phase.

The impact of immobilization of oxazaborolidines supported on silica via different substituents on the boron and nitrogen atoms is evaluated in the enantioselective reduction of acetophenone. The performances of the homogeneous analog oxazaborolidines and silica supported-ones are compared by varying different parameters. This article deals with the synthesis, characterization and catalytic evaluation of silica-supported oxazaborolidines, their recycling capabilities and regeneration limitations.

Chitosan as efficient porous support for dispersion of highly active gold nanoparticles: design of hybrid catalyst for carbon-carbon bond formation.

Macroporous catalyst was obtained by dispersing nanosized gold in the fibrils of the chitosan matrix, followed by CO(2) supercritical drying of the resulting hybrid material. The accessible gold nanoparticles are highly active for carbon-carbon cross coupling reactions.