Cobalt containing glass fibres and their synergistic effect on the HIF-1 pathway for wound healing applications.

Introduction and Methods: Chronic wounds are a major healthcare problem, but their healing may be improved by developing biomaterials which can stimulate angiogenesis, e.g. by activating the Hypoxia Inducible Factor (HIF) pathway. Here, novel glass fibres were produced by laser spinning. The hypothesis was that silicate glass fibres that deliver cobalt ions will activate the HIF pathway and promote the expression of angiogenic genes. The glass composition was designed to biodegrade and release ions, but not form a hydroxyapatite layer in body fluid. Results and Discussion: Dissolution studies demonstrated that hydroxyapatite did not form. When keratinocyte cells were exposed to conditioned media from the cobalt-containing glass fibres, significantly higher amounts of HIF-1α and Vascular Endothelial Growth Factor (VEGF) were measured compared to when the cells were exposed to media with equivalent amounts of cobalt chloride. This was attributed to a synergistic effect of the combination of cobalt and other therapeutic ions released from the glass. The effect was also much greater than the sum of HIF-1α and VEGF expression when the cells were cultured with cobalt ions and with dissolution products from the Co-free glass, and was proven to not be due to a rise in pH. The ability of the glass fibres to activate the HIF-1 pathway and promote VEGF expression shows the potential for their use in chronic wound dressings.

Anidación del chorlo nevado (Charadrius nivosus) en Atotonilco, Jalisco, México

El chorlo nevado (Charadrius nivosus) es una de las aves playeras menos abundantes. Es una especie amenazada cuyas poblaciones se encuentran en constante declive. México es importante para las poblaciones de esta especie, pero existe poca información sobre su reproducción y amenazas. Con el objetivo obtener datos sobre su anidación y potenciales amenazas existentes, realizamos un monitoreo de la población del chorlo nevado en la laguna de Atotonilco durante la temporada reproductiva (marzo-julio) del año 2020. Efectuamos conteos de individuos y nidos, tamaño de nidada, fecha aproximada de puesta de los huevos y observaciones sobre las amenazas presentes durante este periodo. Los machos representaron el 85% (n = 140) de la población total y el mes con la mayor cantidad de nidos fue mayo (n = 15). El tamaño promedio de la nidada fue de 2.5 huevos. La superficie de agua fue variable durante los meses de muestreo, pero no se comprobó estadísticamente que a mayor desecación el tamaño de la nidada disminuyera (p = 0.09). Las principales amenazas identificadas fueron los vehículos motorizados y la ganadería. La laguna de Atotonilco es un sitio clave para la reproducción del chorlo nevado y se deben implementar acciones de manejo que permitan ampliar la presencia de agua y regulen las actividades humanas.

The snowy plover (Charadrius nivosus) is one of the least abundant shorebirds. It is an endangered species whose populations are in steady decline. Mexico is important for the populations of this species, but there is little information on its reproduction and threats. To obtain data on nesting and potential threats, we monitored the snowy plover population at Atotonilco Lagoon during the breeding season (March-July) in 2020. We conducted counts of individuals and nests, clutch size, approximate egg-laying date, and observations on threats present during this period. Males represented 85% (n = 140) of the total population and the month with the highest number of nests was May (n = 15). The average nest size was 2.5 eggs. Water surface area was variable during the sampling months, but it was not statistically proven that the greater the desiccation, the smaller the nest size (p = 0.09). The main threats identified were motorized vehicles and livestock. The Atotonilco Lagoon is a key site for snowy plover reproduction and management actions should be implemented to increase the presence of water and regulate human activities.

Hyaluronic acid hydrogels reinforced with laser spun bioactive glass micro- and nanofibres doped with lithium.

The repair of articular cartilage lesions in weight-bearing joints remains as a significant challenge due to the low regenerative capacity of this tissue. Hydrogels are candidates to repair lesions as they have similar properties to cartilage extracellular matrix but they are unable to meet the mechanical and biological requirements for a successful outcome. Here, we reinforce hyaluronic acid (HA) hydrogels with 13-93-lithium bioactive glass micro- and nanofibres produced by laser spinning. The glass fibres are a reinforcement filler and a platform for the delivery of therapeutic lithium-ions. The elastic modulus of the composites is more than three times higher than in HA hydrogels. Modelling of the reinforcement corroborates the experimental results. ATDC5 chondrogenic cells seeded on the composites are viable and more proliferation occurs on the hydrogels containing fibres than in HA hydrogels alone. Furthermore, the chondrogenic behavior on HA constructs with fibres containing lithium is more marked than in hydrogels with no-lithium fibres.

Laser Microdrilling of Slate Tiles.

Slate is a natural rock usually used in roofs, façades, and for tiling. In spite of this broad use, the production process of slate tiles requires substantial improvements. An important quantity of slate from the quarry is wasted during the manufacturing of the final product. Furthermore, processes are not automatized and the production lead times can be considerably shortened. Therefore, new processing methods to increase productivity, reduce costs and to provide added value to the final slate product are required. Drilling is an important part of these manufacturing processes. Conventional drilling processes usually cause the breaking of the slate tiles; then, even a higher quantity of material is wasted. To overcome these problems, lasers emerge as a feasible tool to produce holes in this material, since mechanical stresses are not induced on the workpiece. In this work, we have studied the CO2 laser microdrilling of slate tiles. We used a Design of Experiments (DOE) methodology to determine the influence of the laser processing parameters on the hole quality. This work demonstrates the capability of a CO2 laser to produce holes in slate with less than 100 microns in diameter, avoiding any fracture, and with a processing time of less than 50 ms per hole. Finally, this process demonstrates the viability of the production of high-density micron-sized holes in a slate tile for water draining purposes.

Laser Cutting: A Review on the Influence of Assist Gas.

Assist gas plays a central role in laser fusion cutting. In this work, the aerodynamic interactions between the assist gas and the workpiece are reviewed. An insight into those phenomena that hinder the cutting quality and performance is provided. These phenomena include shock waves, choking, boundary layer separation, etc. The most relevant and promising attempts to overcome these common problems related to the gas dynamics are surveyed. The review of the current scientific literature has revealed some gaps in the current knowledge of the role of the assist gas dynamics in laser cutting. The assist gas interactions have been investigated only under static conditions; and the dynamic interaction with the molten material on the cutting front has not been addressed. New nozzle designs with improved efficiency of molten material removal are required to improve cut quality; and cutting speed in current industrial laser cutting machines; especially in those assisted by new high-brightness laser sources.

Fabrication of Zn-Sr-doped laser-spinning glass nanofibers with antibacterial properties.

The morphology and dimensions of bioactive materials are essential attributes to promote tissue culture. Bioactive materials with nanofibrous structure have excellent potential to be used as bone-defect fillers, since they mimic the collagen in the extracellular matrix. On the other hand, bioactive glasses with applications in regenerative medicine may present antibacterial properties, which depend on glass composition, concentration and the microorganisms tested. Likewise, their morphology may influence their antibacterial activity too. In the present work, the laser-spinning technique was used to produce bioactive glass nanofibers of two different compositions: 45S5 Bioglass® and ICIE16M, bioactive glass doped with zinc and strontium. Their antibacterial activity against Staphylococcus aureus was tested by culturing them in dynamic conditions. Bacterial growth index profiles during the first days of experiment can be explained by the variations in the pH values of the media. The bactericidal effect of the doped nanofibers at longer times is justified by the release of zinc and strontium ions. Cytotoxicity was analyzed by means of cell viability tests performed with BALB/3T3 cell line.

Toward smart implant synthesis: bonding bioceramics of different resorbability to match bone growth rates.

Craniofacial reconstructive surgery requires a bioactive bone implant capable to provide a gradual resorbability and to adjust to the kinetics of new bone formation during healing. Biomaterials made of calcium phosphate or bioactive glasses are currently available, mainly as bone defect fillers, but it is still required a versatile processing technique to fabricate composition-gradient bioceramics for application as controlled resorption implants. Here it is reported the application of rapid prototyping based on laser cladding to produce three-dimensional bioceramic implants comprising of a calcium phosphate inner core, with moderate in vitro degradation at physiological pH, surrounded by a bioactive glass outer layer of higher degradability. Each component of the implant is validated in terms of chemical and physical properties, and absence of toxicity. Pre-osteoblastic cell adhesion and proliferation assays reveal the adherence and growth of new bone cells on the material. This technique affords implants with gradual-resorbability for restoration of low-load-bearing bone.

Nanocomposites of silver nanoparticles embedded in glass nanofibres obtained by laser spinning.

Nanocomposites made of non-woven glass fibres with diameters ranging from tens of nanometers up to several micrometers, containing silver nanoparticles, were successfully fabricated by the laser spinning technique. Pellets of a soda-lime silicate glass containing silver nanoparticles with varying concentrations (5 and 10 wt%) were used as a precursor. The process followed to obtain the silver nanofibres did not agglomerate significantly the metallic nanoparticles, and the average particle size is still lower than 50 nm. This is the first time that glass nanofibres containing silver nanoparticles have been obtained following a process different from electrospinning of a sol-gel, thus avoiding the limitations of this method and opening a new route to composite nanomaterials. Antibacterial efficiency of the nanosilver glass fibres, tested against one of the most common gram negative bacteria, was greater than 99.99% compared to the glass fibres free of silver. The silver nanoparticles are well-dispersed not only on the surface but are also embedded into the uniform nanofibres, which leads to a long lasting durable antimicrobial effect. All these novel characteristics will potentially open up a whole new range of applications.