Metal Sulfide Ion Exchangers: High Acid Stability of Na2xMg2y-xSn4-yS8 (NMS) and Topotactic Conversion to 2D Solid Acids with Semiconducting Character.

Metal sulfide ion exchange materials (MSIEs) are of interest for nuclear waste remediation applications. We report the high stability of two structurally related metal sulfide ion exchange materials, Na2xMg2y-xSn4-yS8 (Mg-NMS) and Na2SnS3 (Na-NMS), in strongly acid media, in addition to the preparation of Na2xNi2y-xSn4-yS8 (Ni-NMS). Their formation progress during synthesis is studied with in-situ methods, with the target phases appearing in <15 min, reaction completion in <12 h, and high yields (75-80%). Upon contact with nitric or hydrochloric acid, these materials topotactically exchange Na+ for H+, proceeding in a stepwise protonation pathway for Na5.33Sn2.67S8. Na-NMS is stable in 2 M HNO3 and Mg-NMS is stable in 4 M HNO3 for up to 4 h, while both NMS materials are stable in 6 M HCl for up to 4 days. However, the treatment of Mg-NMS and Na-NMS with 2-6 M H2SO4 reveals a much slower protonation process since after 4 h of contact both NMS and HMS are present in the solution. The resultant protonated materials, H2xMg2y-xSn4-yS8 and H4x[(HyNay-1)1.33xSn4--1.33x]S8, are themselves solid acids and readily react with and intercalate a variety of organic amines, where the band gap of the resultant adduct is influenced by amine choice and can be tuned within the range of 1.88(5)-2.27(5) eV. The work function energy values for all materials were extracted from photoemission yield spectroscopy in air (PYSA) measurements and range from 5.47 (2) to 5.76 (2) eV, and the relative band alignments of the materials are discussed. DFT calculations suggest that the electronic structure of Na2MgSn3S8 and H2MgSn3S8 makes them indirect gap semiconductors with multi-valley band edges, with carriers confined to the [MgSn3S8]2- layers. Light electron effective masses indicate high electron mobilities.

Chemical Behavior and Local Structure of the Ruddlesden-Popper and Dion-Jacobson Alloyed Pb/Sn Bromide 2D Perovskites.

The alloyed lead/tin (Pb/Sn) halide perovskites have gained significant attention in the development of tandem solar cells and other optoelectronic devices due to their widely tunable absorption edge. To gain a better understanding of the intriguing properties of Pb/Sn perovskites, such as their anomalous bandgap's dependence on stoichiometry, it is important to deepen the understanding of their chemical behavior and local structure. Herein, we investigate a series of two-dimensional Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phase alloyed Pb/Sn bromide perovskites using butylammonium (BA) and 3-(aminomethyl)pyridinium (3AMPY) as the spacer cations: (BA)2(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) and (3AMPY)(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) through a solution-based approach. Our results show that the ratio and site preference of Pb/Sn atoms are influenced by the layer thickness (n) and spacer cations (A'), as determined by single-crystal X-ray diffraction. Solid-state 1H, 119Sn, and 207Pb NMR spectroscopy analysis shows that the Pb atoms prefer the outer layers in n = 3 members: (BA)2(MA)PbxSnn-xBr10 and (3AMPY)(MA)PbxSnn-xBr10. Layered 2D DJ alloyed Pb/Sn bromide perovskites (3AMPY)(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) demonstrate much narrower optical band gaps, lower energy PL emission peaks, and longer carrier lifetimes compared to those of RP analogs. Density functional theory calculations suggest that Pb-rich alloys (Pb:Sn ∼4:1) for n = 1 compounds are thermodynamically favored over 50:50 (Pb:Sn ∼1:1) compositions. From grazing-incidence wide-angle X-ray scattering (GIWAXS), we see that films in the RP phase orient parallel to the substrate, whereas for DJ cases, random orientations are observed relative to the substrate.

Nonequilibrium Lattice Dynamics in Photoexcited 2D Perovskites.

Interplay between structural and photophysical properties of metal halide perovskites is critical to their utility in optoelectronics, but there is limited understanding of lattice response upon photoexcitation. Here, 2D perovskites butylammonium lead iodide, (BA)2 PbI4 , and phenethylammonium lead iodide, (PEA)2 PbI4 , are investigated using ultrafast transient X-ray diffraction as a function of optical excitation fluence to discern structural dynamics. Both powder X-ray diffraction and time-resolved photoluminescence linewidths narrow over 1 ns following optical excitation for the fluence range studied, concurrent with slight redshifting of the optical bandgaps. These observations are attributed to transient relaxation and ordering of distorted lead iodide octahedra stimulated mainly by electron-hole pair creation. The c axis expands up to 0.37% over hundreds of picoseconds; reflections sampling the a and b axes undergo one tenth of this expansion with the same timescale. Post-photoexcitation appearance of the (110) reflection in (BA)2 PbI4 would suggest a transient phase transition, however, through new single-crystal XRD, reflections are found that violate glide plane conditions in the reported Pbca structure. The static structure space group is reassigned as P21 21 21 . With this, a nonequilibrium phase transition is ruled out. These findings offer increased understanding of remarkable lattice response in 2D perovskites upon excitation.

AInSn2S6 (A = K, Rb, Cs)─Layered Semiconductors Based on the SnS2 Structure.

RbInSn2S6 and CsInSn2S6 are yellow two-dimensional (2D) semiconductors featuring anionic SnS2-type layers of edge-sharing (In/Sn)S6 octahedra. These structures are directly derived from the parent structure of SnS2 by replacement of Sn4+ atoms with A+ and In3+ atoms. The compounds crystallize, isotypic to the ion-exchange material KInSn2S6. They adopt the triclinic space group R3̅m (no. 166). The compounds have similar indirect optical band gaps of 2.31(5) eV for Rb and 2.47(5) eV Cs. The measured work functions for each material are ∼5.38 eV. The density functional theory-calculated effective mass values exhibit strong anisotropy due to the 2D nature of the crystal structures and in the case of CsInSn2S6 for hole carriers along the a, b, and c crystallographic directions are 0.30 m0, 0.34 m0, and 2.54 m0, respectively, while for electrons are 0.06 m0, 0.07 m0, and 0.47 m0, respectively.

Cubic Stuffed-Diamond Semiconductors LiCu3TiQ4 (Q = S, Se, and Te).

Lithium chalcogenides have been understudied, owing to the difficulty in managing the chemical reactivity of lithium. These materials are of interest as potential ion conductors and thermal neutron detectors. In this study, we describe three new cubic lithium copper chalcotitanates that crystallize in the P4̅3m space group. LiCu3TiS4, a = 5.5064(6) Å, and LiCu3TiSe4, a = 5.7122(7) Å, represent two members of a new stuffed diamond-type crystal structure, while LiCu3TiTe4, a = 5.9830(7) Å crystallized into a similar structure exhibiting lithium and copper mixed occupancy. These structures can be understood as hybrids of the zinc-blende and sulvanite structure types. In situ powder X-ray diffraction was utilized to construct a "panoramic" reaction map for the preparation of LiCu3TiTe4, facilitating the design of a rational synthesis and uncovering three new transient phases. LiCu3TiS4 and LiCu3TiSe4 are thermally stable up to 1000 °C under vacuum, while LiCu3TiTe4 partially decomposes when slowly cooled to 400 °C. Density functional theory calculations suggest that these compounds are indirect band gap semiconductors. The measured work functions are 4.77(5), 4.56(5), and 4.69(5) eV, and the measured band gaps are 2.23(5), 1.86(5), and 1.34(5) eV for the S, Se, and Te analogues, respectively.

Removal of CrO42-, a Nonradioactive Surrogate of 99TcO4-, Using LDH-Mo3S13 Nanosheets.

Removal of chromate (CrO42-) and pertechnetate (TcO4-) from the Hanford Low Activity Waste (LAW) is beneficial as it impacts the cost, life cycle, operational complexity of the Waste Treatment and Immobilization Plant (WTP), and integrity of vitrified glass for nuclear waste disposal. Here, we report the application of [MoIV3S13]2- intercalated layer double hydroxides (LDH-Mo3S13) for the removal of CrO42- as a surrogate for TcO4-, from ppm to ppb levels from water and a simulated LAW off-gas condensate of Hanford's WTP. LDH-Mo3S13 removes CrO42- from the LAW condensate stream, having a pH of 7.5, from ppm (∼9.086 × 104 ppb of Cr6+) to below 1 ppb levels with distribution constant (Kd) values of up to ∼107 mL/g. Analysis of postadsorbed solids indicates that CrO42- removal mainly proceeds by reduction of Cr6+ to Cr3+. This study sets the first example of a metal sulfide intercalated LDH for the removal of CrO42-, as relevant to TcO4-, from the simulated off-gas condensate streams of Hanford's LAW melter which contains highly concentrated competitive anions, namely F-, Cl-, CO32-, NO3-, BO33-, NO2-, SO42-, and B4O72-. LDH-Mo3S13's remarkable removal efficiency makes it a promising sorbent to remediate CrO42-/TcO4- from surface water and an off-gas condensate of nuclear waste.