ABSTRACT
The present study describes a pilot remediation test of a co-mingled plume containing BTEX, chlorinated pollutants and pharmaceuticals. Remediation was attempted using a combination of various approaches, including a pump and treat system applying an advanced oxidation process and targeted direct push injections of calcium peroxide. The remediation process was monitored intensively and extensively throughout the pilot test using various conventional and passive sampling methods, including next-generation amplicon sequencing. The results showed that the injection of oxygen-saturated treated water with residual hydrogen peroxide and elevated temperature enhanced the in situ removal of monoaromatics and chlorinated pollutants. In particular, in combination with the injection of calcium peroxide, the conditions facilitated the in situ bacterial biodegradation of the pollutants. The mean groundwater concentration of benzene decreased from 1349µg·L-1 prior to the test to 3µg·L-1 within 3months after the calcium peroxide injections; additionally, monochlorobenzene decreased from 1545µg·L-1 to 36µg·L-1, and toluene decreased from 143µg·L-1 to 2µg·L-1. Furthermore, significant degradation of the contaminants bound to the soil matrix in less permeable zones was observed. Based on a developed 3D model, 90% of toluene and 88% of chlorobenzene bound to the soil were removed during the pilot test, and benzene was removed almost completely. On the other hand, the psychopharmaceuticals were effectively removed by the employed advanced oxidation process only from the treated water, and their concentration in groundwater remained stagnant due to inflow from the surroundings and their absence of in situ degradation. The employment of passive sampling techniques, including passive diffusion bags (PDB) for volatile organic pollutants and their respective transformation products, polar organic compound integrative samplers (POCIS) for the pharmaceuticals and in situ soil microcosms for microbial community analysis, was proven to be suitable for monitoring remediation in saturated zones.
ABSTRACT
This study was performed to test the feasibility of several decontamination methods for remediating heavily contaminated groundwater in a real contaminated locality in the Czech Republic, where a pharmaceuticals plant has been in operation for more than 80 years. The site is polluted mainly by recalcitrant psychopharmaceuticals and monoaromatic hydrocarbons, such as benzene, toluene and chlorobenzene. For this purpose, an advanced oxidation technique employing UV radiation with hydrogen peroxide dosing was employed, in combination with simple aeration pretreatment. The results showed that UV/H2O2 was an efficient and necessary step for degradation of the pharmaceuticals; however, the monoaromatics were already removed during the aeration step. Characterization of the removal mechanisms participating in the aeration revealed that volatilization, co-precipitation and biodegradation contributed to the process. These findings were supported by bacterial metabolite analyses, phospholipid fatty acid analysis, qPCR of representatives of the degradative genes and detailed characterization of the formed precipitate using Mössbauer spectroscopy and scanning electron microscopy. Further tests were carried out in a continuous arrangement directly connected to the wells already present in the locality. The results documented the feasibility of combination of the photo-reactor employing UV/H2O2 together with aeration pretreatment for 4 months, where the overall decontamination efficiency ranged from 72% to 99% of the pharmaceuticals. We recorded even better results for the monoaromatics decontamination except for one month, when we encountered some technical problems with the aeration pump. This demonstrated the necessity of using the aeration step.
