ABSTRACT
A new fractional non-Fourier (Cattaneo) photovoltaic (PV) model is presented to enhance the thermal performance of a PV system combined with a heat spreader (HS). The fractional Cattaneo model is shown to be effective in examining transient processes across the entirety of a PV system, in contrast to the conventional Fourier model's inability to predict system performance. Consequently, a comparison is conducted between the classical Fourier model with the fractional Fourier and fractional Cattaneo models for the PV system. The impact of using an aluminum heat spreader, with rectangular and trapezoidal shapes, has been developed under hot and cold climate conditions. The findings show that adding a trapezoidal heat spreader reduced the cell temperature by 20 K in summer and 12 K in winter. The reduction in the PV temperature led to an enhancement in daily average power by approximately 28% and 37% in hot and cold weather, respectively. Moreover, economic, exergoeconomic, and enviroeconomic assessment is introduced. The outcomes revealed that the electrical production costs of the rectangular and trapezoidal HS systems are 0.272 and 0.214 $/kWh, respectively, while about 0.286 $/kWh for the conventional PV panel. Based on the environmental study, the estimated CO2 reduction for PV, PV with rectangular HS, and PV with trapezoidal spreader is 0.5504, 0.7704, and 0.8012 tons, respectively. Finally, real experimental data are used to validate the fractional Cattaneo model. The results demonstrate that there is a great fitting with the measured data, with errors in PV power and exergy efficiency of just 0.628% and 3.84%, respectively, whereas their corresponding values for the classical model are 5.72 and 13.13%.
Subject(s)
Aluminum , Hot Temperature , Temperature , Cold Climate , Cold TemperatureABSTRACT
An ultrafast, compact, zero-biased, and complementary metal-oxide semiconductor-compatible graphene photodetector (PD) based on a silicon-on-insulator hybrid plasmonic waveguide (HPWG) is proposed. Lumerical MODE solver is employed to investigate the modal characteristics of TM-polarized modes in the HPWG composing the PD. It is shown that the input light can be completely coupled into the photonic-like and plasmonic-like fundamental TM modes at the PD section. These two modes are exploited together in the photodetection process to enhance the PD performance. A rigorous analysis is performed in order to extract the optoelectronic characteristics of the single-layer graphene (SLG) used in the proposed structure. Lumerical 3D-FDTD solver is then employed to quantify the light interaction of the two aforementioned optical modes with the SLG. With a proper design at a wavelength of 1550 nm, the PD voltage responsivity reaches 2.8 V/W, and the photocurrent responsivity is obtained as 18.5 mA/W, while the corresponding absorption length is kept below 8µm and the noise equivalent power is limited to 3.7pW/Hz. Moreover, as the PD operates under zero bias, its photoresponse is predominated by the photothermoelectric mechanism, exhibiting a bandwidth that exceeds 180 GHz while avoiding the dark current.
