ABSTRACT
Cellulose is classified as one of the most abundant biopolymers in nature. Its excellent properties have gained a lot of interest as an alternative material for synthetic polymers. Nowadays, cellulose can be processed into numerous derivative products, such as microcrystalline cellulose (MCC) and nanocrystalline cellulose (NCC). MCC and NCC have demonstrated outstanding mechanical properties owing to their high degree of crystallinity. One of the promising applications of MCC and NCC is high-performance paper. It can be utilized as a substitute for the aramid paper that has been commercially used as a honeycomb core material for sandwich-structured composites. In this study, MCC and NCC were prepared by extracting cellulose from the Cladophora algae resource. MCC and NCC possessed different characteristics because of their distinct morphologies. Furthermore, MCC and NCC were formed into a paper at various grammages and then impregnated with epoxy resin. The effect of paper grammage and epoxy resin impregnation on the mechanical properties of both materials was studied. Then, MCC and NCC paper was prepared as a raw material for honeycomb core applications. The results showed that epoxy-impregnated MCC paper outperformed epoxy-impregnated NCC paper with a compression strength of 0.72 MPa. The interesting result from this study is that the compression strength of the MCC-based honeycomb core was comparable to the commercial ones despite being made of a natural resource, which is sustainable and renewable. Therefore, cellulose-based paper is promising to be used for honeycomb core applications in sandwich-structured composites.
ABSTRACT
Oil spills in the marine environment are a rising concern due to their adverse impacts on living creatures and the environment. Hence, remediation methods have been used to remove the oil from the contaminated water. A sorbent material is considered the best method for oil spill absorption. However, commonly used commercial sorbents are made from nonrenewable and nonenvironmentally friendly materials. In this research, natural rubber foam (NRF) was used as a sorbent material with the addition of a filler, i.e., silica and a silica-lignin hybrid, to increase its oil sorption capacity and reusability. The silica and silica-lignin hybrid were extracted from rice husk waste by means of the precipitation method. The silica-lignin hybrid-filled NRF exhibited excellent hydrophobicity, with a water contact angle of 133°, and had more stable reusability compared to unfilled NRF and silica-filled NRF. In addition, the optimum oil absorption capacity of silica-lignin hybrid-filled NRF was 1.36 g g-1. Overall, the results showed that silica-lignin hybrid-filled NRF has the potential to be developed as a green oil absorbent material and is promising in terms of economic and environmental aspects.
