Carrageenan/calcium alginate composite hydrogel filtration membranes for efficient cationic dye separation.

The development of biopolymer-based filtration systems for water remediation applications is an extremely fascinating area of research. In this paper, we developed a biopolymer-based filtration system using sodium alginate (NaAlg) and carrageenan (Car) for the removal of the toxic cationic dye, methylene blue (MB). The membrane's properties were assessed using FTIR, TGA, UTM, FESEM, EDS, XRD, and water uptake, revealing commendable thermomechanical stability (5.79 MPa), good hydrophilicity, and compatibility. The experimental results further revealed that lambda Car/calcium alginate (λ-Car/CaAlg) exhibited superior dye rejection (100%) and flux (11.67 L m-2 h-1) compared to kappa Car/CaAlg (κ-Car/CaAlg) (99.22% and 11.19 L m-2 h-1) and plain alginate (CaAlg) (99.63% and 9.79 L m-2 h-1). The high MB rejection rate was attributed to the sieving mechanism and electrostatic interaction. A rejection rate of 100% was achieved at an initial MB concentration of 10 mg/L, pressure of 0.1 MPa, pH of 7, and temperature of 25°C. Furthermore, the hydrogel membranes demonstrated excellent recyclability over nine cycles, indicating their potential for water treatment applications.

Decoration of dandelion-like manganese-doped iron oxide microflowers on plasma-treated biochar for alleviation of heavy metal pollution in water.

Carbon-based biowaste incorporated with inorganic oxides as a composite is an enticing option to mitigate heavy metal pollution in water resources due to its more economical and efficient performance. With this in mind, we constructed manganese-doped iron oxide microflowers resembling the dandelion-like structure on the surface of cold plasma-treated carbonized rice husk (MnFe2O3/PCRH). The prepared composite exhibited 45% and 19% higher removal rates for Cu2+ and Cd2+, respectively than the pristine CRH. The MnFe2O3/PCRH composite was characterized using XRD, FTIR, FESEM, EDX, HR-TEM, XPS, BET, TGA, and zeta potential, while the adsorption capacities were investigated as a function of pH, time, and initial concentration in batch trials. As for the kinetics, the pseudo-second-order was the rate-limiting over the pseudo-first-order and Elovich model, demonstrating that the chemisorption process governed the adsorption of Cu2+ and Cd2+. Additionally, the maximum adsorption capacities of the MnFe2O3/PCRH were found to be 122.8 and 102.5 mg/g for Cu2+ and Cd2+, respectively. Based on thorough examinations by FESEM-EDS, FTIR, and XPS, the possible mechanisms for the adsorption can be ascribed to surface complexation by oxygen-containing groups, a dissolution-precipitation of the ions with -OH groups, electrostatic attraction between metal ions and the adsorbent's partially charged surface, coordination of Cu2+ and Cd2+ with π electrons by aromatic/graphitic carbon in the MnFe2O3/PCRH, and pore filling and diffusion. Lastly, the adsorption efficiencies were maintained at about 70% of its initial adsorption even after five adsorption-desorption cycles, displaying its remarkable stability and reusability.

Low-cost and eco-friendly PVA/carrageenan membrane to efficiently remove cationic dyes from water: Isotherms, kinetics, thermodynamics, and regeneration study.

Methylene blue (MB), a common dye in the textile industry, has a multitude of detrimental consequences on humans and the environment. Accordingly, it is necessary to remove dyes from water to guarantee our health and sustainable ecosystem. In this study, we developed polyvinyl alcohol (PVA)-based hydrogel adsorbents with high adsorption capacity by adding three types of carrageenan (kappa, iota, and lambda) to remove MB from water. Thanks to the functional groups, the PVA/carrageenan membranes dramatically increased the removal efficiency (kappa, 98.8%; iota, 97.0%; lambda, 95.4%) compared to the pure PVA membrane (6.3%). Among the three types of PVA/carrageenan membranes, the PVA/kappa-carrageenan membrane exhibited the best adsorption capacity of 147.8 mg/g. This result implies that steric hindrance was considerably significant, given that kappa carrageenan has only one sulfate group in the repeating unit, whereas iota and lambda carrageenan composite PVA membranes possess two and three sulfate groups. Apart from the maximum adsorption capacity, this study addressed a variety of characteristics of PVA/carrageenan membranes such as the effects of initial MB concentration, kappa carrageenan weight percentage, contact time, adsorbent dosage, and temperature on the adsorption performance. In addition, the kinetic and thermodynamic studies were also carried out. Lastly, the reusability of the PVA/carrageenan membrane was verified by the 98% removal efficiency maintained after five adsorption-desorption cycles.

Recent progress of bioplastics in their properties, standards, certifications and regulations: A review.

The environmental impact associated with fossil fuel-based polymers has paved the way to explore biopolymer-based plastics, their properties, and their applications. Bioplastics are polymeric materials that are greatly interesting due to their eco-friendlier and non-toxic nature. In recent years, exploring the different sources of bioplastics and their applications has become one of the active research areas. Biopolymer-based plastics have applications in food packaging, pharmaceuticals, electronics, agricultural, automotive and cosmetic sectors. Bioplastics are considered safe, but there are several economic and legal challenges to implementing them. Hence, this review aims to i) outline the terminology associated with bioplastics, its global market, major sources, types and properties of bioplastics, ii) discuss the major bioplastic waste management and recovery options, iii) provide the major standards and certifications regarding bioplastics, iv) explore the various country-wise regulations and restrictions associated with bioplastics, and v) enumerate the various challenges and limitations associated with bioplastics and future directions. Therefore, providing adequate knowledge about various bioplastics, their properties and regulatory aspects can be of great importance in the industrialization, commercialization and globalization of bioplastics to replace petroleum-based products.

Efficacy of Electrospun Nanofiber Membranes on Fouling Mitigation: A Review.

Despite the advantages of high contaminant removal, operational flexibility, and technical advancements offered, the undesirable fouling property of membranes limits their durability, thus posing restrictions on their usage. An enormous struggle is underway to conquer this major challenge. Most of the earlier reviews include the basic concepts of fouling and antifouling, with respect to particular separation processes such as ultrafiltration, nanofiltration, reverse osmosis and membrane bioreactors, graphene-based membranes, zwitterionic membranes, and so on. As per our knowledge, the importance of nanofiber membranes in challenging the fouling process has not been included in any record to date. Nanofibers with the ability to be embedded in any medium with a high surface to volume ratio play a key role in mitigating the fouling of membranes, and it is important for these studies to be critically analyzed and reported. Our Review hence intends to focus on nanofiber membranes developed with enhanced antifouling and biofouling properties with a brief introduction on fabrication processes and surface and chemical modifications. A summary on surface modifications of preformed nanofibers is given along with different nanofiller combinations used and blend fabrication with efficacy in wastewater treatment and antifouling abilities. In addition, future prospects and advancements are discussed.

Nanocellulose: A Fundamental Material for Science and Technology Applications.

Recently, considerable interest has been focused on developing greener and biodegradable materials due to growing environmental concerns. Owing to their low cost, biodegradability, and good mechanical properties, plant fibers have substituted synthetic fibers in the preparation of composites. However, the poor interfacial adhesion due to the hydrophilic nature and high-water absorption limits the use of plant fibers as a reinforcing agent in polymer matrices. The hydrophilic nature of the plant fibers can be overcome by chemical treatments. Cellulose the most abundant natural polymer obtained from sources such as plants, wood, and bacteria has gained wider attention these days. Different methods, such as mechanical, chemical, and chemical treatments in combination with mechanical treatments, have been adopted by researchers for the extraction of cellulose from plants, bacteria, algae, etc. Cellulose nanocrystals (CNC), cellulose nanofibrils (CNF), and microcrystalline cellulose (MCC) have been extracted and used for different applications such as food packaging, water purification, drug delivery, and in composites. In this review, updated information on the methods of isolation of nanocellulose, classification, characterization, and application of nanocellulose has been highlighted. The characteristics and the current status of cellulose-based fiber-reinforced polymer composites in the industry have also been discussed in detail.

Ecofriendly and low-cost bio adsorbent for efficient removal of methylene blue from aqueous solution.

A novel bio adsorbent was fabricated from turmeric, polyvinyl alcohol and carboxymethyl cellulose for MB dye removal. The physicochemical, antibacterial and biodegradable nature of the film was evaluated using scanning electron microscopy, optical microscopy, universal testing machine, water contact angle, thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffraction, agar disc diffusion method and soil degradability. The inclusion of turmeric into PVA/CMC film improves the biodegradability, antibacterial activity and thermomechanical property of the films. PVA/CMC/TUR film displayed good MB adsorption capacity (qe: 6.27 mg/g) and maximum dye adsorption (R%; 83%) and was achieved at initial dye concentration of 10 mg/L with contact time 170 min at room temperature. The adsorption data of MB on PVA/CMC/TUR film was evaluated using four models Langmuir, Freundlich, Temkin and D-R isotherms. The different kinetic of adsorption (pseudo-first order, pseudo-second order and intraparticle diffusion model) was also applied for adsorption of MB on the films. The experimental result suggests that PVA/CMC/TUR films are an alternate cheap adsorbent for water treatment.

Adsorption of methylene blue dye from aqueous solution by a novel PVA/CMC/halloysite nanoclay bio composite: Characterization, kinetics, isotherm and antibacterial properties.

Here the fabrication of a novel PVA/CMC/halloysite nanoclay membrane for the effective adsorption of cationic dye (methylene blue, MB) from aqueous environment is reported. The membranes were analyzed through scanning electron microscopy (SEM), optical microscopy (OM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), contact angle and universal testing machine (UTM) analysis. The adsorption behavior of the membrane in terms of nanoclay loading, contact time, initial concentration of MB, pH and temperature were also discussed. The membrane exhibits excellent removal efficiency (99.5%) for MB in the optimal conditions such as nanoclay dose = 6 wt%, initial dye concentration = 10 ppm, contact time = 240 min, pH = 10 and temperature = 30 °C. Three isotherm models (Freundlich, Langmuir and Temkin) were employed to analyze the dye adsorption data. The results revealed that the adsorption process could be described well with both Freundlich and Langmuir isotherm model. The kinetics of MB adsorption onto membrane follows pseudo-second-order model while thermodynamic parameter indicate that adsorption is feasible and endothermic in nature. The antibacterial studies revealed that the PVA/CMC/halloysite nanoclay membrane possess notable antibacterial property. Finally, the desorption studies showed that the membrane have good reusability even after four recycles.

Removal of anionic dye Congo red from aqueous environment using polyvinyl alcohol/sodium alginate/ZSM-5 zeolite membrane.

In this study, a novel PVA/SA/ZSM-5 zeolite membrane with good regeneration capacity was successfully prepared by solvent casting technique. The properties of the membranes were assessed by employing different characterization techniques such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), optical microscopy (OP), thermogravimetric analysis (TGA), contact angle and universal testing machine (UTM). XRD, TGA and UTM results revealed that the crystallinity and thermo-mechanical performance of the membrane could be tuned with zeolite content. The successful incorporation of zeolite into the polymer matrix was confirmed by FT-IR, SEM and OP analysis. The adsorption ability of the as-prepared membrane was evaluated with a model anionic dye, Congo red. Adsorption studies show that the removal efficiency of the membrane could be tuned by varying zeolite content, initial concentration of dye, contact time, pH and temperature. Maximum dye adsorption (5.33 mg/g) was observed for 2.5 wt% zeolite loaded membrane, at an initial dye concentration of 10 ppm, pH 3 and temperature 30 °C. The antibacterial efficiency of the membrane against gram-positive (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli) was also reported. The results show that membrane inhibits the growth of both gram-positive and gram-negative bacteria. The adsorption isotherm was studied using two models: Langmuir and Freundlich isotherm. The results show that the experimental data fitted well with Freundlich isotherm with a high correlation coefficient (R2 = 0.998). Meanwhile, the kinetic studies demonstrate that pseudo-second-order (R2 = 0.999) model describe the adsorption of Congo red onto PVA/SA/ZSM-5 zeolite membrane better than pseudo-first-order (R2 = 0.972) and intra particle diffusion model (R2 = 0.91). The experimental studies thus suggest that PVA/SA/ZSM-5 zeolite could be a promising candidate for the removal of Congo red from aqueous solution.