On site bioremediation of hydrocarbon-contaminated Arctic tundra soils in inoculated biopiles.

There is a need to develop technology to allow the remediation of soil in polar regions that have been contaminated by hydrocarbon fuel spills. Bioremediation is potentially useful for this purpose, but has not been well demonstrated in polar regions. We investigated biopiles for on-site bioremediation of soil contaminated with Arctic diesel fuel in two independent small-scale field experiments at different sites on the Arctic tundra. The results were highly consistent with one another. In biopiles at both sites, extensive hydrocarbon removal occurred after one summer. After 1 year in treatments with optimal conditions, total petroleum hydrocarbons were reduced from 196 to below 10 mg per kg of soil at one site, and from 2,109 to 195 mg per kg of soil at the other site. Addition of ammonium chloride and sodium phosphate greatly stimulated hydrocarbon removal and indicates that biodegradation was the primary mechanism by which this was achieved. Inoculation with cold-adapted, mixed microbial cultures further stimulated hydrocarbon removal during the summer immediately following inoculation. At one site, soil temperature was monitored during the summer season, and a clear plastic cover increased biopile soil temperature, measured as degree-day accumulation, by 30-49%. Our results show that on-site bioremediation of fuel-contaminated soil at Arctic tundra sites is feasible.

Chlorine dioxide inactivation of Cryptosporidium parvum oocysts and bacterial spore indicators.

Cryptosporidium parvum, which is resistant to chlorine concentrations typically used in water treatment, is recognized as a significant waterborne pathogen. Recent studies have demonstrated that chlorine dioxide is a more efficient disinfectant than free chlorine against Cryptosporidium oocysts. It is not known, however, if oocysts from different suppliers are equally sensitive to chlorine dioxide. This study used both a most-probable-number-cell culture infectivity assay and in vitro excystation to evaluate chlorine dioxide inactivation kinetics in laboratory water at pH 8 and 21 degrees C. The two viability methods produced significantly different results (P < 0.05). Products of disinfectant concentration and contact time (Ct values) of 1,000 mg. min/liter were needed to inactivate approximately 0.5 log(10) and 2.0 log(10) units (99% inactivation) of C. parvum as measured by in vitro excystation and cell infectivity, respectively, suggesting that excystation is not an adequate viability assay. Purified oocysts originating from three different suppliers were evaluated and showed marked differences with respect to their resistance to inactivation when using chlorine dioxide. Ct values of 75, 550, and 1,000 mg. min/liter were required to achieve approximately 2.0 log(10) units of inactivation with oocysts from different sources. Finally, the study compared the relationship between easily measured indicators, including Bacillus subtilis (aerobic) spores and Clostridium sporogenes (anaerobic) spores, and C. parvum oocysts. The bacterial spores were found to be more sensitive to chlorine dioxide than C. parvum oocysts and therefore could not be used as direct indicators of C. parvum inactivation for this disinfectant. In conclusion, it is suggested that future studies address issues such as oocyst purification protocols and the genetic diversity of C. parvum, since these factors might affect oocyst disinfection sensitivity.

On-line monitoring and control of methanol concentration in shake-flask cultures of Pichia pastoris.

The methylotrophic yeast Pichia pastoris can be used to express recombinant genes at high levels under the control of the methanol-inducible alcohol oxidase 1 (AOX1) promoter. Accurate regulation of the methanol concentration in P. pastoris cultures is necessary to maintain induction, while preventing accumulation of methanol to cytotoxic levels. We developed an inexpensive methanol sensor that uses a gas-permeable silicone rubber tube immersed in the culture medium and an organic solvent vapor detector. The sensor was used to monitor methanol concentration continuously throughout a fed-batch shake-flask culture of a P. pastoris clone producing the N-lobe of human transferrin. The sensor calibration was stable for the duration of the culture and the output signal accurately reflected the methanol concentration determined off-line by HPLC. A closed-loop control system utilizing this sensor was developed and used to maintain a 0.3% (v/v) methanol concentration in the culture. Use of this system resulted in a fivefold increase in volumetric protein productivity over levels obtained using the conventional fed-batch protocol.