Near-field coded-mask technique and its potential for proton therapy monitoring.

Objective.Prompt-gamma imaging encompasses several approaches to the online monitoring of the beam range or deposited dose distribution in proton therapy. We test one of the imaging techniques - a coded mask approach - both experimentally and via simulations.Approach.Two imaging setups have been investigated experimentally. Each of them comprised a structured tungsten collimator in the form of a modified uniformly redundant array mask and a LYSO:Ce scintillation detector of fine granularity. The setups differed in detector dimensions and operation mode (1D or 2D imaging). A series of measurements with radioactive sources have been conducted, testing the performance of the setups for near-field gamma imaging. Additionally, Monte Carlo simulations of a larger setup of the same type were conducted, investigating its performance with a realistic gamma source distribution occurring during proton therapy.Main results.The images of point-like sources reconstructed from two small-scale prototypes' data using the maximum-likelihood expectation maximisation algorithm constitute the experimental proof of principle for the near-field coded-mask imaging modality, both in the 1D and the 2D mode. Their precision allowed us to calibrate out certain systematic offsets appearing due to the limited alignment accuracy of setup elements. The simulation of the full-scale setup yielded a mean distal falloff retrieval precision of 0.72 mm in the studies for beam energy range 89.5-107.9 MeV and with 1 × 108protons (a typical number for distal spots). The implemented algorithm of image reconstruction is relatively fast-a typical procedure needs several seconds.Significance.Coded-mask imaging appears a valid option for proton therapy monitoring. The results of simulations let us conclude that the proposed full-scale setup is competitive with the knife-edge-shaped and the multi-parallel slit cameras investigated by other groups.

Effect of Feeding Olive Pomace Acid Oil on Dark Chicken Meat Lipid Composition, Oxidative Stability, Color, and Sensory Acceptance.

This study evaluated the effect of using olive pomace acid oil (OPAO) instead of crude palm oil (PO) or refined olive pomace oil (ROPO) on lipid composition, lipid oxidation, and quality of chicken meat. Broiler chickens were fed diets with 6% of PO, ROPO, or OPAO, and deboned legs with skin were sampled. Fresh and refrigerated (commercial conditions; 7 days) chicken meat samples were assessed for fatty acid (FA) composition, tocopherol (T) and tocotrienol (T3) content, lipid oxidative stability, 2-thiobarbituric acid (TBA) values, volatile compounds, color, and sensory acceptance. Using ROPO and OPAO led to meat richer in monounsaturated FAs and OPAO to lower α-T levels compared to PO. Oxidative stability, TBA values, volatile compounds, and overall acceptance of meat were not affected by diet. Refrigeration increased TBA values and some volatile compounds' concentrations, but it did not decrease redness or consumers' overall acceptance. Therefore, the OPAO used was an adequate fat source for chicken diets at 6%, as it produced dark meat lower in saturated FAs than PO without affecting lipid oxidation or overall acceptance. According to this, upcycling OPAO as an energy source in chicken diets would be possible, which can contribute to the sustainability of the food chain.

Hybrid PET/Compton-camera imaging: an imager for the next generation.

Compton cameras can offer advantages over gamma cameras for some applications, since they are well suited for multitracer imaging and for imaging high-energy radiotracers, such as those employed in radionuclide therapy. While in conventional clinical settings state-of-the-art Compton cameras cannot compete with well-established methods such as PET and SPECT, there are specific scenarios in which they can constitute an advantageous alternative. The combination of PET and Compton imaging can benefit from the improved resolution and sensitivity of current PET technology and, at the same time, overcome PET limitations in the use of multiple radiotracers. Such a system can provide simultaneous assessment of different radiotracers under identical conditions and reduce errors associated with physical factors that can change between acquisitions. Advances are being made both in instrumentation developments combining PET and Compton cameras for multimodal or three-gamma imaging systems, and in image reconstruction, addressing the challenges imposed by the combination of the two modalities or the new techniques. This review article summarizes the advances made in Compton cameras for medical imaging and their combination with PET.

Effect of Feeding Acid Oils on European Seabass Fillet Lipid Composition, Oxidative Stability, Color, and Sensory Acceptance.

Acid oils (AO) are fat by-products of edible oil refining with a high energetic value, being an interesting option for a more sustainable aquaculture nutrition. This study was conducted to evaluate the effects of the partial replacement of fish oil (FO) in diets by two AO instead of crude vegetable oils on the lipid composition, lipid oxidation and quality of fresh European seabass fillets, and after their commercial refrigerated storage for 6 days. Fish were fed with five different diets, the added fat being FO (100%) or a blend of FO (25%) and another fat (75%): crude soybean oil (SO), soybean-sunflower acid oil (SAO), crude olive pomace oil (OPO), or olive pomace acid oil (OPAO). Fresh and refrigerated fillets were assessed for fatty acid profile, tocopherol (T) and tocotrienol (T3) composition, lipid oxidative stability, 2-thiobarbituric acid (TBA) value, volatile compound content, color, and sensory acceptance. Refrigerated storage did not affect T + T3 total content but increased secondary oxidation products (TBA values and volatile compound contents) in fillets from all diets. The FO substitution decreased EPA and DHA and increased T and T3 in fish fillets, but the recommended human daily intake of EPA plus DHA could still be covered with 100 g of fish fillets. Both a higher oxidative stability and a lower TBA value were found in SO, SAO, OPO, or OPAO fillets, obtaining the greatest oxidative stability in OPO and OPAO fillets. Sensory acceptance was not affected by the diet or the refrigerated storage, while the differences found in color parameters would not be perceived by the human eye. According to the oxidative stability and acceptability of flesh, SAO and OPAO are adequate replacements of FO as energy source in European seabass diets, which implies that these by-products can be upcycled, improving the environmental and economical sustainability of aquaculture production.

Dedicated Chamber for Multimodal In Vivo Imaging of Adult Zebrafish.

In vivo imaging of adult zebrafish is challenging, particularly for dynamic or long acquisitions when using, for example, positron emission tomography, single photon emission computed tomography, computed tomography (CT), or magnetic resonance imaging (MRI). An aqueous environment is indispensable to ensure animal welfare, but commercial small-animal imaging chambers do not provide such conditions, as they are designed for rodents. In this study we present a dedicated flow-through chamber that includes fish immobilization and allows for the continuous supply of fresh water and anesthetics, as well as the removal of excretions. Both flow simulations and experiments, as well as first scans with MRI and CT, support the suitability of the chamber.

Proton therapy monitoring: spatiotemporal emission reconstruction with prompt gamma timing and implementation with PET detectors.

Objective. In this study we introduce spatiotemporal emission reconstruction prompt gamma timing (SER-PGT), a new method to directly reconstruct the prompt photon emission in the space and time domains inside the patient in proton therapy.Approach. SER-PGT is based on the numerical optimisation of a multidimensional likelihood function, followed by a post-processing of the results. The current approach relies on a specific implementation of the maximum-likelihood expectation maximisation algorithm. The robustness of the method is guaranteed by the complete absence of any information about the target composition in the algorithm.Main results. Accurate Monte Carlo simulations indicate a range resolution of about 0.5 cm (standard deviation) when considering 107primary protons impinging on an homogeneous phantom. Preliminary results on an anthropomorphic phantom are also reported.Significance. By showing the feasibility for the reconstruction of the primary particle range using PET detectors, this study provides significant basis for the development of an hybrid in-beam PET and prompt photon device.

Oxidative Quality of Acid Oils and Fatty Acid Distillates Used in Animal Feeding.

Acid oils (AO) and fatty acid distillates (FAD) are byproducts from chemical and physical refining of edible oils and fats, respectively. Their high energy value makes their upcycling interesting as alternatives to conventional fats in animal feeding. The objective of this study is to characterize their oxidative quality and to provide recommendations about their evaluation for animal feeding purposes. The oxidation status (peroxide value (PV), p-Anisidine value (p-AnV), % polymeric compounds (POL)), the oxidative stability (induction time by the Rancimat at 120 °C (IT)), the fatty acid composition (FA), and tocopherol and tocotrienol content of 92 AO and FAD samples from the Spanish market were analyzed. Both AO and FAD showed low PV (0.8 and 1 meq O2/kg); however, p-AnV was higher in FAD (36.4 vs. 16.4 in AO) and POL was higher in AO (2.5% vs. not detected in FAD) as a consequence of the type of refining process. The botanical origin of AO and FAD influenced FA and tocol composition, and they influenced IT. A high variability was observed for most analyzed parameters, reinforcing the need for standardizing AO and FAD to obtain reliable feed ingredients and to include primary and secondary oxidative parameters within their quality control.

Food-Based Dietary Guidelines around the World: A Comparative Analysis to Update AESAN Scientific Committee Dietary Recommendations.

Food-Based Dietary Guidelines (FBDG) include dietary recommendations based on food groups according to the general and accepted nutrition principles and current scientific evidence. Adoption of FBDG contributes to the prevention of malnutrition in all its forms, promotes human health, and reduces environmental impact. The present review aims to perform an international comparative analysis of the FBDG adopted in different countries from three different continents (America, Asia, and Europe), with particular reference to the Spanish Food Safety and Nutrition Agency (AESAN, Agencia Española de Seguridad Alimentaria y Nutrición) Scientific Committee dietary recommendations. A total of twelve countries with the most updated FBDG and/or closest to the traditional and cultural preferences of Spain were finally selected. All the reviewed FBDG provided recommendations for fruits, vegetables, cereals, legumes, nuts, milk and dairy products, meat and derivatives, fish, eggs, water, and oil; however, remarkable differences regarding recommended amounts were found among countries.

Methods to determine the quality of acid oils and fatty acid distillates used in animal feeding.

Acid oils and fatty acid distillates are by-products from the refining of edible oils and fats. They are used as feed ingredients, but their highly variable composition sometimes affects the productive parameters of the animals. Thus, their quality control and standardization are necessary. The official methods recommended for crude and refined fats and oils must be modified to give reliable results when applied to acid oils and fatty acid distillates. This article summarizes the drawbacks that were encountered during the setup of the analytical methods and how were they overcome by adapting the methods to these type of fat samples. Some methods such as the determinations of fatty acid composition, tocopherol and tocotrienol content, unsaponifiable matter, acidity and peroxide value had to be minimally adapted. However, others such as the determinations of moisture and volatile matter, insoluble impurities, lipid classes and p-anisidine value showed important drawbacks that required a more significant adaptation.•All the analytical methods have been successfully applied to acid oils and fatty acid distillates.•A detailed description of the sample preparation for analysis and applied analytical methods is provided as a compendium of methods in the supplementary material.•These methods will be extremely useful to improve the quality control of these heterogeneous feed ingredients.

Imaging Inflammation - From Whole Body Imaging to Cellular Resolution.

Imaging techniques have evolved impressively lately, allowing whole new concepts like multimodal imaging, personal medicine, theranostic therapies, and molecular imaging to increase general awareness of possiblities of imaging to medicine field. Here, we have collected the selected (3D) imaging modalities and evaluated the recent findings on preclinical and clinical inflammation imaging. The focus has been on the feasibility of imaging to aid in inflammation precision medicine, and the key challenges and opportunities of the imaging modalities are presented. Some examples of the current usage in clinics/close to clinics have been brought out as an example. This review evaluates the future prospects of the imaging technologies for clinical applications in precision medicine from the pre-clinical development point of view.

Advanced Monte Carlo simulations of emission tomography imaging systems with GATE.

Built on top of the Geant4 toolkit, GATE is collaboratively developed for more than 15 years to design Monte Carlo simulations of nuclear-based imaging systems. It is, in particular, used by researchers and industrials to design, optimize, understand and create innovative emission tomography systems. In this paper, we reviewed the recent developments that have been proposed to simulate modern detectors and provide a comprehensive report on imaging systems that have been simulated and evaluated in GATE. Additionally, some methodological developments that are not specific for imaging but that can improve detector modeling and provide computation time gains, such as Variance Reduction Techniques and Artificial Intelligence integration, are described and discussed.

Composition and Nutritional Value of Acid Oils and Fatty Acid Distillates Used in Animal Feeding.

Acid oils (AO) and fatty acid distillates (FAD) are oil refining by-products rich in free fatty acids. The objective of this study is their characterization and the identification of their sources of variability so that they can be standardized to improve their use as feed ingredients. Samples (n=92) were collected from the Spanish market and the MIU value (sum of moisture, insoluble impurities, and unsaponifiable matter), lipid classes, fatty acid composition, and tocol content were analyzed. Their composition was highly variable even between batches from the same producer. As FAD originated from a distillation step, they showed higher free fatty acid amounts (82.5 vs 57.0 g/100 g, median values), whereas AO maintained higher proportions of moisture, polymers, tri-, di-, and monoacylglycerols. Overall, the MIU value was higher in AO (2.60-18.50 g/100 g in AO vs 0.63-10.44 g/100 g in FAD), with most of the contents of insoluble impurities being higher than those in the guidelines. Tocol and fatty acid composition were influenced by the crude oil's botanical origin. The calculated dietary energy values were, in general, higher for AO and decreased when a MIU correction factor was applied. The analytical control and standardization of these by-products is of the outmost importance to revalorize them as feed ingredients.

Performance of MACACO Compton telescope for ion-beam therapy monitoring: first test with proton beams.

In order to exploit the advantages of ion-beam therapy in a clinical setting, delivery verification techniques are necessary to detect deviations from the planned treatment. Efforts are currently oriented towards the development of devices for real-time range monitoring. Among the different detector concepts proposed, Compton cameras are employed to detect prompt gammas and represent a valid candidate for real-time range verification. We present the first on-beam test of MACACO, a Compton telescope (multi-layer Compton camera) based on lanthanum bromide crystals and silicon photo-multipliers. The Compton telescope was first characterized through measurements and Monte Carlo simulations. The detector linearity was measured employing (22)Na and Am-Be sources, obtaining about 10% deviation from linearity at 3.44 MeV. A spectral image reconstruction algorithm was tested on synthetic data. Point-like sources emitting gamma rays with energy between 2 and 7 MeV were reconstructed with 3-5 mm resolution. The two-layer Compton telescope was employed to measure radiation emitted from a beam of 150 MeV protons impinging on a cylindrical PMMA target. Bragg-peak shifts were achieved via adjustment of the PMMA target location and the resulting measurements used during image reconstruction. Reconstructed Bragg peak profiles proved sufficient to observe peak-location differences within 10 mm demonstrating the potential of the MACACO Compton Telescope as a monitoring device for ion-beam therapy.

First Images of a Three-Layer Compton Telescope Prototype for Treatment Monitoring in Hadron Therapy.

A Compton telescope for dose monitoring in hadron therapy is under development at IFIC. The system consists of three layers of LaBr3 crystals coupled to silicon photomultiplier arrays. (22)Na sources have been successfully imaged reconstructing the data with an ML-EM code. Calibration and temperature stabilization are necessary for the prototype operation at low coincidence rates. A spatial resolution of 7.8 mm FWHM has been obtained in the first imaging tests.

Shine-Through in PET/MR Imaging: Effects of the Magnetic Field on Positron Range and Subsequent Image Artifacts.

UNLABELLED: Simultaneous PET/MR imaging is an emerging hybrid modality for clinical and preclinical imaging. The static magnetic field of the MR imaging device affects the trajectory of the positrons emitted by the PET radioisotopes. This effect translates into an improvement of the spatial resolution in transaxial images. However, because of the elongation of the positron range distribution along the magnetic field, the axial resolution worsens and shine-through artifacts may appear. These artifacts can lead to misinterpretation and overstaging. The aim of this work was to study the relevance of this effect. METHODS: Measurements were performed in a 3-tesla PET/MR scanner. A 1-cm(2) piece of paper, soaked with a radioisotope and placed in air, was scanned, and the magnitude of the shine-through was quantified from the PET images for various radioisotopes. Additionally, PET/MR and PET/CT images of the lungs and the larynx with trachea of a deceased swine were obtained after injecting a mixture of NiSO4 and (68)Ga to simulate hot tumor lesions. RESULTS: For the radioactive paper, shine-through artifacts appeared in the location of the acrylic glass backplane, located 3 cm from the source in the axial direction. The ratio between the activity of the shine-through and the activity reconstructed in the original location ranged from 0.9 ((18)F) to 5.7 ((68)Ga). For the larynx-with-trachea images, the magnitude of the artifacts depended on the organ orientation with respect to the magnetic field. The shine-through activity could reach 46% of the reconstructed activity (larynx lesion). The lesion within the trachea produced 2 artifacts, symmetrically aligned with the magnetic field and characterized by artifact-to-lesion volume-of-interest ratios ranging from 21% to 30%. CONCLUSION: In simultaneous PET/MR imaging, the effect of the magnetic field on positrons may cause severe artifacts in the PET image when the lesions are close to air cavities and high-energy radioisotopes are used. For accurate staging and interpretation, this effect needs to be recognized and adequate compensation techniques should be developed.

Sensitivity recovery for the AX-PET prototype using inter-crystal scattering events.

The development of novel detection devices and systems such as the AX-positron emission tomography (PET) demonstrator often introduce or increase the measurement of atypical coincidence events such as inter-crystal scattering (ICS). In more standard systems, ICS events often go undetected and the small measured fraction may be ignored. As the measured quantity of such events in the data increases, so too does the importance of considering them during image reconstruction. Generally, treatment of ICS events will attempt to determine which of the possible candidate lines of response (LoRs) correctly determine the annihilation photon trajectory. However, methods of assessment often have low success rates or are computationally demanding. In this investigation alternative approaches are considered. Experimental data was taken using the AX-PET prototype and a NEMA phantom. Three methods of ICS treatment were assessed--each of which considered all possible candidate LoRs during image reconstruction. Maximum likelihood expectation maximization was used in conjunction with both standard (line-like) and novel (V-like in this investigation) detection responses modeled within the system matrix. The investigation assumed that no information other than interaction locations was available to distinguish between candidates, yet the methods assessed all provided means by which such information could be included. In all cases it was shown that the signal to noise ratio is increased using ICS events. However, only one method, which used full modeling of the ICS response in the system matrix--the V-like model--provided enhancement in all figures of merit assessed in this investigation. Finally, the optimal method of ICS incorporation was demonstrated using data from two small animals measured using the AX-PET demonstrator.

High-throughput analysis of lipid hydroperoxides in edible oils and fats using the fluorescent reagent diphenyl-1-pyrenylphosphine.

A fluorometric method for the determination of hydroperoxides (HP) in edible oils and fats using the reagent diphenyl-1-pyrenylphosphine (DPPP) was developed and validated. Two solvent media containing 100% butanol or a mixture of chloroform/methanol (2:1, v/v) can be used to solubilise lipid samples. Regardless of the solvent used to solubilise the sample, the DPPP method was precise, accurate, sensitive and easy to perform. The HP content of 43 oil and fat samples was determined and the results were compared with those obtained by means of the AOCS Official Method for the determination of peroxide value (PV) and the ferrous oxidation-xylenol orange (FOX) method. The proposed method not only correlates well with the PV and FOX methods, but also presents some advantages such as requiring low sample and solvent amounts and being suitable for high-throughput sample analysis.

Joint image and motion reconstruction for PET using a B-spline motion model.

We present a novel joint image and motion reconstruction method for PET. The method is based on gated data and reconstructs an image together with a motion function. The motion function can be used to transform the reconstructed image to any of the input gates. All available events (from all gates) are used in the reconstruction. The presented method uses a B-spline motion model, together with a novel motion regularization procedure that does not need a regularization parameter (which is usually extremely difficult to adjust). Several image and motion grid levels are used in order to reduce the reconstruction time. In a simulation study, the presented method is compared to a recently proposed joint reconstruction method. While the presented method provides comparable reconstruction quality, it is much easier to use since no regularization parameter has to be chosen. Furthermore, since the B-spline discretization of the motion function depends on fewer parameters than a displacement field, the presented method is considerably faster and consumes less memory than its counterpart. The method is also applied to clinical data, for which a novel purely data-driven gating approach is presented.

Comparison of basis functions for 3D PET reconstruction using a Monte Carlo system matrix.

In emission tomography, iterative statistical methods are accepted as the reconstruction algorithms that achieve the best image quality. The accuracy of these methods relies partly on the quality of the system response matrix (SRM) that characterizes the scanner. The more physical phenomena included in the SRM, the higher the SRM quality, and therefore higher image quality is obtained from the reconstruction process. High-resolution small animal scanners contain as many as 10³-104 small crystal pairs, while the field of view (FOV) is divided into hundreds of thousands of small voxels. These two characteristics have a significant impact on the number of elements to be calculated in the SRM. Monte Carlo (MC) methods have gained popularity as a way of calculating the SRM, due to the increased accuracy achievable, at the cost of introducing some statistical noise and long simulation times. In the work presented here the SRM is calculated using MC methods exploiting the cylindrical symmetries of the scanner, significantly reducing the simulation time necessary to calculate a high statistical quality SRM and the storage space necessary. The use of cylindrical symmetries makes polar voxels a convenient basis function. Alternatively, spherically symmetric basis functions result in improved noise properties compared to cubic and polar basis functions. The quality of reconstructed images using polar voxels, spherically symmetric basis functions on a polar grid, cubic voxels and post-reconstruction filtered polar and cubic voxels is compared from a noise and spatial resolution perspective. This study demonstrates that polar voxels perform as well as cubic voxels, reducing the simulation time necessary to calculate the SRM and the disk space necessary to store it. Results showed that spherically symmetric functions outperform polar and cubic basis functions in terms of noise properties, at the cost of slightly degraded spatial resolution, larger SRM file size and longer reconstruction times. However, we demonstrate that post-reconstruction smoothing, usually applied in emission imaging to reduce the level of noise, can produce a spatial resolution degradation of ~50%, while spherically symmetric basis functions produce a degradation of only ~6%, compared to polar and cubic voxels, at the same noise level. Therefore, the image quality trade-off obtained with blobs is higher than that obtained with cubic or polar voxels.

Geometrical and Monte Carlo projectors in 3D PET reconstruction.

PURPOSE: In the present work, the authors compare geometrical and Monte Carlo projectors in detail. The geometrical projectors considered were the conventional geometrical Siddon ray-tracer (S-RT) and the orthogonal distance-based ray-tracer (OD-RT), based on computing the orthogonal distance from the center of image voxel to the line-of-response. A comparison of these geometrical projectors was performed using different point spread function (PSF) models. The Monte Carlo-based method under consideration involves an extensive model of the system response matrix based on Monte Carlo simulations and is computed off-line and stored on disk. METHODS: Comparisons were performed using simulated and experimental data of the commercial small animal PET scanner rPET. RESULTS: The results demonstrate that the orthogonal distance-based ray-tracer and Siddon ray-tracer using PSF image-space convolutions yield better images in terms of contrast and spatial resolution than those obtained after using the conventional method and the multiray-based S-RT. Furthermore, the Monte Carlo-based method yields slight improvements in terms of contrast and spatial resolution with respect to these geometrical projectors. CONCLUSIONS: The orthogonal distance-based ray-tracer and Siddon ray-tracer using PSF image-space convolutions represent satisfactory alternatives to factorizing the system matrix or to the conventional on-the-fly ray-tracing methods for list-mode reconstruction, where an extensive modeling based on Monte Carlo simulations is unfeasible.