Unveiling the impact of high-pressure processing on anthocyanin-protein/polysaccharide interactions: A comprehensive review.

Anthocyanins, natural plant pigments responsible for the vibrant hues in fruits, vegetables, and flowers, boast antioxidant properties with potential human health benefits. However, their susceptibility to degradation under conditions such as heat, light, and pH fluctuations necessitates strategies to safeguard their stability. Recent investigations have focused on exploring the interactions between anthocyanins and biomacromolecules, specifically proteins and polysaccharides, with the aim of enhancing their resilience. Notably, proteins like soy protein isolate and whey protein, alongside polysaccharides such as pectin, starch, and chitosan, have exhibited promising affinities with anthocyanins, thereby enhancing their stability and functional attributes. High-pressure processing (HPP), emerging as a non-thermal technology, has garnered attention for its potential to modulate these interactions. The application of high pressure can impact the structural features and stability of anthocyanin-protein/polysaccharide complexes, thereby altering their functionalities. However, caution must be exercised, as excessively high pressures may yield adverse effects. Consequently, while HPP holds promise in upholding anthocyanin stability, further exploration is warranted to elucidate its efficacy across diverse anthocyanin variants, macromolecular partners, pressure regimes, and their effects within real food matrices.

Comparison of shrimp waste-derived chitosan produced through conventional and microwave-assisted extraction processes: Physicochemical properties and antibacterial activity assessment.

Depending on its physicochemical properties and antibacterial activities, chitosan can have a wide range of applications in food, pharmaceutical, medicine, cosmetics, agriculture, and aquaculture. In this experimental study, chitosan was extracted from shrimp waste through conventional extraction, microwave-assisted extraction, and conventional extraction under microwave process conditions. The effects of the heating source on the physicochemical properties and antibacterial activity were investigated. The results showed that the heating process parameters affected the physicochemical properties considerably. The conventional procedure yielded high molecular weight chitosan with a 12.7 % yield, while the microwave extraction procedure yielded a porous medium molecular weight chitosan at 11.8 %. The conventional extraction under microwave process conditions led to medium molecular weight chitosan with the lowest yield (10.8 %) and crystallinity index (79 %). Antibacterial assessment findings revealed that the chitosan extracted using the conventional method had the best antibacterial activity in the agar disk diffusion assay against Listeria monocytogenes (9.48 mm), Escherichia coli. (8.79 mm), and Salmonella Typhimurium (8.57 mm). While the chitosan obtained by microwave-assisted extraction possessed the highest activity against E. coli. (8.37 mm), and Staphylococcus aureus (8.05 mm), with comparable antibacterial activity against S. Typhimurium (7.34 mm) and L. monocytogenes (6.52 mm). Moreover, the minimal inhibitory concentration and minimal bactericidal concentration assays demonstrated that among the chitosan samples investigated, the conventionally-extracted chitosan, followed by the chitosan extracted by microwave, had the best antibacterial activity against the target bacteria.

Current and emerging applications of saccharide-modified chitosan: a critical review.

Chitin, as the main component of the exoskeleton of Arthropoda, is a highly available natural polymer that can be processed into various value-added products. Its most important derivative, i.e., chitosan, comprising ß-1,4-linked 2-amino-2-deoxy-ß-d-glucose (deacetylated d-glucosamine) and N-acetyl-d-glucosamine units, can be prepared via alkaline deacetylation process. Chitosan has been used as a biodegradable, biocompatible, non-antigenic, and nontoxic polymer in some in-vitro applications, but the recently found potentials of chitosan for in-vivo applications based on its biological activities, especially antimicrobial, antioxidant, and anticancer activities, have upgraded the chitosan roles in biomaterials. Chitosan approval, generally recognized as a safe compound by the United States Food and Drug Administration, has attracted much attention toward its possible applications in diverse fields, especially biomedicine and agriculture. Despite some favorable characteristics, the chitosan's structure should be customized for advanced applications, especially due to its drawbacks, such as low drug-load capacity, low solubility, high viscosity, lack of elastic properties, and pH sensitivity. In this context, derivatization with relatively inexpensive and highly available mono- and di-saccharides to soluble branched chitosan has been considered a "game changer". This review critically scrutinizes the emerging technologies based on the synthesis and application of lactose- and galactose-modified chitosan as two important chitosan derivatives. Some characteristics of chitosan derivatives and biological activities have been detailed first to understand the value of these natural polymers. Second, the saccharide modification of chitosan has been discussed briefly. Finally, the applications of lactose- and galactose-modified chitosan have been scrutinized and compared to native chitosan to provide an insight into the current state-of-the research for stimulating new ideas with the potential of filling research gaps.

Potential application of polysaccharide mucilages as a substitute for emulsifiers: A review.

Mucilages are natural compounds consisting mainly of polysaccharides with complex chemical structures. Mucilages also contain uronic acids, proteins, lipids, and bioactive compounds. Because of their unique properties, mucilages are used in various industries, including food, cosmetics, and pharmaceuticals. Typically, commercial gums are composed only of polysaccharides, which increase their hydrophilicity and surface tension, reducing their emulsifying ability. As a result of the presence of proteins in combination with polysaccharides, mucilages possess unique emulsifying properties due to their ability to reduce surface tension. In recent years, various studies have been conducted on using mucilages as emulsifiers in classical and Pickering emulsions because of their unique emulsifying feature. Studies have shown that some mucilages, such as yellow mustard, mutamba, and flaxseed mucilages, have a higher emulsifying capacity than commercial gums. A synergistic effect has also been shown in some mucilages, such as Dioscorea opposita mucilage when combined with commercial gums. This review article investigates whether mucilages can be used as emulsifiers and what factors affect their emulsifying properties. A discussion of the challenges and prospects of using mucilages as emulsifiers is also presented in this review.

Recent developments in improving the emulsifying properties of chitosan.

Chitosan is one of the valuable products obtained from crustacean waste. The unique characteristics of chitosan (antimicrobial, antioxidant, anticancer, and anti-inflammatory) have increased its application in various sectors. Besides unique biological properties, chitosan or chitosan-based compounds can stabilize emulsions. Nevertheless, studies have shown that chitosan cannot be used as an efficient stabilizer because of its high hydrophilicity. Hence, this review aims to provide an overview of recent studies dealing with improving the emulsifying properties of chitosan. In general, two different approaches have been reported to improve the emulsifying properties of chitosan. The first approach tries to improve the stabilization property of chitosan by modifying its structure. The second one uses compounds such as polysaccharides, proteins, surfactants, essential oils, and polyphenols with more wettability and emulsifying properties than chitosan's particles in combination with chitosan to create complex particles. The tendency to use chitosan-based particles to stabilize Pickering emulsions has recently increased. For this reason, more studies have been conducted in recent years to improve the stabilizing properties of chitosan-based particles, especially using the electrostatic interaction method. In the electrostatic interaction method, numerous research has been conducted on using proteins and polysaccharides to increase the stabilizing property of chitosan.

Chitosan nanocarriers containing essential oils as a green strategy to improve the functional properties of chitosan: A review.

Large amounts of agricultural waste, especially marine product waste, are produced annually. These wastes can be used to produce compounds with high-added value. Chitosan is one such valuable product that can be obtained from crustacean wastes. Various biological activities of chitosan and its derivatives, especially antimicrobial, antioxidant, and anticancer properties, have been confirmed by many studies. The unique characteristics of chitosan, especially chitosan nanocarriers, have led to the expansion of using chitosan in various sectors, especially in biomedical sciences and food industries. On the other hand, essential oils, known as volatile and aromatic compounds of plants, have attracted the attention of researchers in recent years. Like chitosan, essential oils have various biological activities, including antimicrobial, antioxidant, and anticancer. In recent years, one of the ways to improve the biological properties of chitosan is to use essential oils encapsulated in chitosan nanocarriers. Among the various biological activities of chitosan nanocarriers containing essential oils, most studies conducted in recent years have been in the field of antimicrobial activity. It was documented that the antimicrobial activity was increased by reducing the size of chitosan particles in the nanoscale. In addition, the antimicrobial activity was intensified when essential oils were in the structure of chitosan nanoparticles. Essential oils can increase the antimicrobial activity of chitosan nanoparticles with synergistic effects. Using essential oils in the structure of chitosan nanocarriers can also improve the other biological properties (antioxidant and anticancer activities) of chitosan and increase the application fields of chitosan. Of course, using essential oils in chitosan nanocarriers for commercial use requires more studies, including stability during storage and effectiveness in real environments. This review aims to overview recent studies on the biological effects of essential oils encapsulated in chitosan nanocarriers, with notes on their biological mechanisms.

Producing submicron chitosan-stabilized oil Pickering emulsion powder by an electrostatic collector-equipped spray dryer.

Chitosan (CS) was modified with two fatty acids, i.e., capric acid (CA) and palmitic acid (PA). Particle size (315.8 nm), zeta potential (31.8 mV), and viscosity (29.4 mPa.s) of CS-PA nanogels were lower than CS-CA nanogels (793.2 nm, 53.3 mV, and 70.7 mPa.s). First, hempseed oil-in-water Pickering nanoemulsions were stabilized by CS-based particles/maltodextrin (MD). Then, the emulsions were dried using an electrostatic collector-equipped spray dryer. The D50 of re-dispersed emulsion powders with CS-PA/MD coating was 936 nm. According to the FE-SEM images, oil coated with CS-PA/MD showed higher porosity and C/O ratio at the particle surface compared to the CS-CA/MD coating leading to more oil leakage. In addition, the crystallinity of hempseed oil coated with CS-PA/MD was higher than the one coated with CS-CA/MD. These findings showed that submicron Pickering emulsion powders could be achieved by targeted modification of CS and using a spray dryer equipped with an electrostatic collector.

Effect of type of fatty acid attached to chitosan on walnut oil-in-water Pickering emulsion properties.

The effect of fatty acid type bonded to chitosan on the emulsifying properties of chitosan-based particles was investigated. Capric acid, myristic acid, and stearic acid were attached to chitosan chains. Longer fatty acids in the structure of chitosan lead to the better and more uniform formation of chitosan nanogels. The contact angle of chitosan, chitosan-capric acid, chitosan-myristic acid and chitosan-stearic acid were found to be 52.5°, 60.0°, 65.1° and 72.5°, respectively. Different chitosan nanogels were used to stabilize walnut oil emulsions, and the emulsion stabilized with chitosan-stearic acid nanogels had the lowest creaming index (15.2%). Stabilized emulsions with chitosans attached to longer chain acids were more adapted to the mechanism of Pickering emulsions, in addition to having higher viscosity as well as more gel-like behavior. In general, this study showed that emulsifying properties of chitosan could be improved by increasing the number of fatty acid carbons bonded to chitosan.

Enhancement of oil productivity of Mortierella alpine and investigation into the potential of Pickering oil-in-water emulsions to improve its oxidative stability.

Mortierella alpine is an oleaginous fungi known for its tendency to produce oil and polyunsaturated fatty acid. Initial experiment indicated that magnesium oxide nanoparticles (MgONPs) accelerated glucose consumption and, consequently, oil production. After enhancement of Mortierella alpine CBS 754.68' oil production, the oxidative stability of the oil rich in long-chain polyunsaturated fatty acids (arachidonic acid) encapsulated by modified chitosan (CS) was assayed. To confirm the modification of CS, Fourier transform infrared spectroscopy (FTIR) spectrum indicated that the connection between CS and capric acid (CA) as well as stearic acid (SA) was well formed, leading to a considerable improvement in nanoparticle formation, measured by the SEM photographs, and physical and oxidative stability of emulsions. The oxidative stability of Mortierella alpine' oil emulsion in a period of 20 days at ambient temperature was monitored. Of all treated media, CS-SA nanoparticles were of the most oxidative stability. The rheological tests showed that viscosity behaviors were dominated by elastic behaviors in the impregnating emulsion with unmodified CS at the applied frequencies, and the elastic behavior of the emulsion sample prepared with CS-SA was slightly higher than that of the emulsion prepared with CS-CA. The results of redispersibility indicated that the powdered emulsion stabilized by CS-SA had the lowest water absorption.

Antioxidant, antimicrobial, and cytotoxic activities of extracts from the seed and pulp of Jujube (Ziziphus jujuba) grown in Iran.

The aim of the present study was to investigate the biological activities of the ultrasound-assisted extracts obtained from pulp and seed of jujube (Ziziphus jujuba) fruits. To reach this purpose, total phenolic content (TPC), total flavonoid content (TFC), total pro-anthocyanin, DPPH radical scavenging activity, rancimat test, as well as antimicrobial activity and cytotoxicity test of both jujube pulp and seed extracts were evaluated. Total phenolic content (TPC), total flavonoid content (TFC), and total pro-anthocyanin in pulp extract were higher than those obtained from seed extract. In addition, DPPH radical scavenging activity of pulp extract (IC50 = 53.97 µg/ml) was higher than that of seed extract (IC50 = 88.68 µg/ml). Furthermore, the highest antimicrobial activity was observed against Escherichia coli and Staphylococcus aureus (MIC = 20 mg/ml) for both seed and pulp extracts. In vitro cytotoxicity evaluation on seven cell lines revealed that pulp and seed extracts of jujube had no cytotoxic activity. The present results suggested the promising antioxidant properties of jujube, which can be used in the fabrication of functional bioactive ingredients for different purposes.

Potential Pickering emulsion stabilized with chitosan-stearic acid nanogels incorporating clove essential oil to produce fish-oil-enriched mayonnaise.

The aim of this study was to introduce Pickering emulsions stabilized by chitosan (CS)-stearic acid (SA) nanogels incoporating clove essential oil (CEO) as a new way to enrich mayonnaise with fish oil. Firstly, fish oil-in-water Pickering emulsion was prepared, which the most stability of emulsion was achived at 2 % (w/w) CS-SA nanogels and 60 % (w/w) fish oil. Then, the fish oil-in-water Pickering emulsions stabilized with 2 % CS-SA nanogels as well as 2 % CS-SA nanogels incorporating CEO were used in formulation of mayonnaise. The results showed that the use of fish oil in the form of emulsion stabilized with CS-SA nanogels increased the oxidative stability of mayonnaise. Moreover, rheological studies indicated that the use of CS-SA nanogels could increase the elasticity of mayonnaise, which higher elasticity was observed about mayonnaise containing CS-SA nanogels incorporating CEO. Overall, CS-SA nanogels incorporating CEO can be used for increasing gel-like structure of the fish-oil-enriched mayonnaise.

Preparation, Physicochemical Characterization and Oxidative Stability of Omega-3 Fish Oil/α-Tocopherol-co-Loaded Nanostructured Lipidic Carriers.

Purpose: This study aimed to improve the pharmacokinetic behavior of polyunsaturated fatty acids (PUFAs) oxidation to enhance oxidative stability for inhibiting formation of toxic hydroperoxides, develops off-flavors and shortens shelf-life. Methods: Nanostructured lipid carrier (NLC) co-encapsulating omega-3 fish oil and α-tocopherol was successfully prepared by melt blending and hot sonication method to enhance the oxidative stability of the fish oil. Encapsulation efficiency (EE) and in vitro release, the oxidative stability of prepared nanoparticles (NPs) were measured using detection of peroxide value (PV) and thiobarbituric acid (TBA) during 40 days. Results: Electron microscopy and particle size analysis showed dispersed and homogenous NPs with an average diameter of 119 nm. Sustained oil release at a physiologic pH, and longterm stability in terms of the size, zeta, and dispersity of NPs was achieved after 75 days of storage. The omega-3 fish oil co-encapsulated with α-tocopherol in the NLC possessed better oxidative stability compared with the all other formulations. Also, it was found that the NLC as an encapsulation method was more successful to inhibit the formation of the primary oxidation products than the secondary oxidation products. Conclusion: Generally, these findings indicated that co-encapsulation of fish oil and α-tocopherol within the NLC can be a suitable delivery system in order to enrich foodstuffs, in particular clear beverages.

Formulation of Pickering sunflower oil-in-water emulsion stabilized by chitosan-stearic acid nanogel and studying its oxidative stability.

The aim of this study was to obtain a stable sunflower oil-in-water (O/W) Pickering emulsion stabilized by chitosan (CS)-stearic acid (SA) nanogels and to compare the oxidative stability of the sunflower Pickering emulsion stabilized by CS-SA nanogels with sunflower oil emulsion stabilized by Tween 80. The results of the scanning electron microscopy revealed that by increasing the SA to CS ratio, the uniformity of particles was increased. Also, the results showed that the emulsions with pH of 8, SA to CS ratio of 0.5:1, and oil-to-nanogel ratio of 20:1 had the highest stability and minimum droplet size. In the following, the oxidative stability of the most favorable Pickering emulsion and the Tween 80-stabilized emulsion was evaluated and compared using the peroxide and thiobarbituric acid tests. The findings implied that the O/W emulsion stabilized by CS-SA nanogels had a higher oxidative stability than the O/W emulsion stabilized by Tween 80.

Physical and antimicrobial properties of starch-carboxy methyl cellulose film containing rosemary essential oils encapsulated in chitosan nanogel.

This study was set to prepare a new active film by using a biodegradable bio-based source, i.e., corn starch. To achieve that, benzoic acid (BA) and chitosan (CS) were covalently bound and CS-BA nanogel was then obtained using self-assembly method. Subsequently, rosemary essential oil (REO) was encapsulated in CS-BA nanogel. Finally, REO in both free and encapsulated forms were incorporated in starch-carboxy methyl cellulose (CMC) films and their physical, mechanical and antimicrobial properties were studied. The films incorporating CS-BA nanogel had a higher water vapor permeability compared with the films containing REO. Moreover, film containing 0.2% CS-BA nanogel had the highest transparency and tensile strength. The REO and nanogel alone had inhibitory effects against Staphylococcus aureus (S. aureus) and by encapsulation, the inhibitory effect of REO was increased. By encapsulating REO in nanogel, both immediately (REO) and gradual (Nanogel) antimicrobial effect against S. aureus in the starch-CMC suspensions were obtained.

Evaluation of antioxidant activity, total phenolics, total flavonoids and LC-MS/MS characterisation of phenolic constituents in Stachys lavandulifolia.

The aim of this study was to evaluate phenolics profile and antioxidant activity of Stachys lavandulifolia. Total phenolics (TP), total flavonoids (TF), DPPH• assay (IC50), ferric ion reducing antioxidant power (FRAP) and total antioxidant capacity (TAC) of the methanolic extract were measured. The content of TP, TF, IC50, FRAP and TAC, were obtained as 16.59 gallic acid equiv./g dry matter (DM), 4.48 mg quercetin equiv./g DM, 2.07 (µg/mL), 0.014 (absorbance/mg phenolic) and 14.61 (mg BHT equiv./g DM), respectively. The results showed that S. lavandulifolia, compared to other species of Stachys, had moderate TP content with desirable antioxidant activity. Subsequently, 59 various phenolic compounds were identified and confirmed in the methanolic extract of S. lavandulifolia using high mass accuracy by MS2 experiments. The compounds consisted of 6 hydroxybenzoic acids and hydroxybenzoic aldehydes, 9 hydroxycinnamic acids, 1 coumarin, 32 flavonoids, 3 lignans, 2 stilbenes, 3 tannins and 3 other phenolics.

Antioxidant, anti-microbial and antimutagenicity activities of pistachio (Pistachia vera) green hull extract.

Antioxidant, anti-microbial and antimutagenicity activities of pistachio (Ahmadaghaei variety) green hull extracts (crude and purified extracts) were studied. At first, different solvents were compared for determining of the best solvent for extraction of phenolic compounds from pistachio green hull. Water and acetonitrile with 49.32 and 6.22 (mg of gallic acid equivalents/g sample) were the best and the worst solvent in the extraction of phenolic compounds, respectively. The antioxidant capacity of crude and purified extracts were assessed through ABTS assay, DPPH assay and beta-carotene bleaching (BCB) method. A concentration-dependent antioxidative capacity was verified in ABTS, DPPH assays and BCB method. The anti-microbial capacity was screened against Gram positive and Gram negative bacteria, and fungi. Aqueous and purified extracts inhibited the growth of Gram positive bacteria; Bacillus cereus was the most susceptible one with MIC of 1mg/mL and 0.5mg/mL for the crude and purified extracts, respectively. The results of antimutagenicity test showed that phenolic compounds of pistachio green hull have antimutagenicity activity against direct mutagen of 2-nitrofluorene. The results obtained indicate that pistachio green hull may become important as a cheap and noticeable source of compounds with health protective potential and anti-microbial activity.