An Innovative Technique of Iris Positioning Using Digital Photographs for Custom Ocular Prosthesis: A Case Report.

Trauma, cancer, and congenital abnormalities are the three main causes of eye loss. A person's personal and professional life is left with functional, aesthetic, and psychological problems when they lose one eye. A customized ocular prosthesis made of heat-cured polymethylmethacrylate can be used to restore an eye defect. Fabrication of the customized ocular prosthesis has multiple steps including scleral plank fabrication, iris positioning, and characterization. This article's primary goal is to explain a novel method for iris positioning for better cosmetic outcomes.

Rehabilitation of a Patient With Maxillary Defect and Severe Attrition Using Obturator Prostheses: A Case Report.

Surgery for palate lesions may result in oro-nasal/antral communication, which reduces a person's quality of life by affecting swallowing, speech, and food reflux. The shape and size of this obturator prosthesis might vary based on the severity of the defect. This case report describes the prosthetic rehabilitation of the patient with post-COVID mucormycosis and generalized attrition of teeth using an obturator and full mouth rehabilitation.

Hollow Complete Denture With a Speech Bulb Prosthesis: A Case Report.

Speech is the most basic yet invaluable mode of expression for an individual. Alterations in speech can have vast effects on the psychological well-being of a person, hampering social interactions. Congenital or traumatic defects of the hard and soft palate result in velopharyngeal dysfunction, which often results in abnormal and aberrant speech. Apart from these, it is also a common outcome following surgical repair of cleft palate. Prosthodontic management of such cases with velopharyngeal obturators to improve speech and function is well documented and known to give optimal results. In this case report, we are presenting the rehabilitation of residual velopharyngeal insufficiency post-cleft palate closure using a speech bulb prosthesis attached to a complete denture. As the speech bulb would add to the weight of the existing prosthesis, a hollow complete denture was planned. The prosthesis resulted in a decrease in nasal air emissions and hypernasality, thus improving the patient's communication skills and overall quality of life.

Prosthetic rehabilitation of a midfacial defect with magnet-retained intraoral-extraoral combination prosthesis.

It may not be possible to treat large maxillofacial defects by surgical reconstruction alone. Prosthetic rehabilitation is invariably required to restore esthetics and function. Achieving adequate retention, stability, and support in these maxillofacial prostheses is a challenging task. This clinical report describes prosthetic rehabilitation of a midfacial defect following surgical resection of squamous cell carcinoma. The intraoral defect was restored with a maxillary obturator prosthesis with salivary reservoir, and the extraoral defect was restored with magnet-retained facial prosthesis having an acrylic resin framework and an overlying silicone facial prosthesis.

An in vitro study to compare the influence of two different primers on the peel bond strength between a maxillofacial silicone material and an acrylic resin material versus a composite resin material.

Aim: The aim of this study was to evaluate and compare the peel bond strength of an autopolymerizing acrylic resin and a fiberreinforced composite (FRC) resin to a heat temperature vulcanizing maxillofacial silicone (M511) using two different primers. Settings and Design: In vitro - comparative study. Materials and Methods: Autopolymerizing acrylic resin and FRC resin specimens with a dimension of 75 mm (length) ×10 mm (width) × 3 mm (height) were fabricated. A total of 60 samples were split into six categories based on the substructure material and primers (A330G primer and Sofreliner tough primer) used to bond the maxillofacial silicone to the FRC and acrylic resin specimens. In a universal testing machine, the peel bond strength was conducted at a 10 mm/min crosshead speed until bonding failure occurred. Statistical Analysis Used: The t-test, one-way analysis of variance, and the Tukey's honest significant difference (post hoc test) tests were used to statistically assess the values. Results: The Sofreliner tough primer produced the greatest peel bond strength in both the acrylic resin (0.89690 N/mm) and the FRC resin groups (3.19860 N/mm). Adhesive failures predominated in the acrylic resin group regardless of the primer used. The FRC group showed predominantly cohesive failures with both the A330G primer and Sofreliner tough primer. Conclusion: This study suggests that FRC resin combined with Sofreliner tough primer can significantly enhance the peel bond strength.

Survival rates of axial and tilted implants in the rehabilitation of edentulous jaws using the All-on-four™ concept: A systematic review.

Aim: The aim of this review was to evaluate the survival rate of axial and tilted implants in rehabilitation of edentulous jaws using all on four concept. Setting and Design: Systematic Review. Materials and Methods: A literature review was performed in MEDLINE, PubMed Central (PMC), Google scholar, Embase, Cochrane Central Register of Controlled Trials. Hand searches were conducted of the bibliographic of related journals and systematic reviews. A total of 380 articles were obtained from the intial screening process. Of these articles, 25 articles fulfilled the inclusion criteria. The authors performed evaluation of articles independently as well as data extraction and quality assessment. Statistical Analysis Used: Qualitative analysis. Results: The major prosthetic complication was the fracture of the acrylic prosthesis. The mean cumulative survival rate of implants (72-132 months) were 94% to 98%. The prosthesis survival rate (12 months) was between 99% to 100%. The averaged bone loss was 1.3 ±0.4 mm (12-60 months). No Significant difference was found between survival rates of axial and tilted implants nor between maxilla and mandible. Conclusion: All on four concept can be employed successfully in the edentulous patients with resorbed ridges while improving their quality of life and reducing morbidity. However,randomized clinical trials with large sampling size and long term follow up should be incorporated.

Efficiency of simplified versus traditional denture fabrication methods: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Conventional techniques (CTs) for complete denture fabrication involve a series of clinical and laboratory steps. A simplification of this process has been advocated, but whether simplified techniques result in acceptable treatment outcomes is unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the efficiency of simplified denture fabrication techniques in comparison with CTs. MATERIAL AND METHODS: The standard methodological procedures prescribed by the Cochrane Collaboration for systematic review and meta-analysis were used. An electronic search (MEDLINE through PubMed, Cochrane trial registry, and Scopus) and a manual search up to February 2020 were made to identify studies. Only randomized controlled trials involving edentulous adults requiring complete denture treatment were included. RESULTS: Nineteen studies met the inclusion criteria. The pooled estimate of the included studies for patient satisfaction at 6 months marginally favored the simplified method of denture fabrication (standardized mean difference=0.02 [95% confidence interval {CI} -0.22 to 0.27]). The pooled estimate of the included studies for clinical time and cost of fabrication favored the simplified method (mean difference=-77.34 [95% CI -122.45 to -32.24] and mean difference=-85.89 [95% CI -170.02 to -1.77] respectively). CONCLUSIONS: Simplified techniques were cost effective and less time consuming than the CT, with no significant difference in patient satisfaction or oral health-related quality of life. The high risk of bias and heterogeneity among studies requires that the results be considered cautiously.

Customized Cheek Plumper with Friction Lock Attachment for a Completely Edentulous Patient to Enhance Esthetics: A Clinical Report.

Prosthetic rehabilitation of a completely edentulous patient should never be restricted to the replacement of missing teeth. The ultimate aim of complete denture treatment should be restoration of the full range of oral functions and esthetics. Slumped cheeks are always a concern for esthetically demanding complete denture patients. This article describes a simple, scientific, cost-effective technique to improve facial esthetics in a completely edentulous patient with the help of a cheek plumper. The technique used here implements the concept of neutral zone to precisely determine the amount of space available for the cheek plumper. The simple friction lock attachments that retained the cheek plumpers on the prosthesis were also fabricated after determining the space available in the appropriate areas. Thus an effort was made to keep the cheek plumpers unobtrusive yet effective to ensure complete integration of the prosthesis into the stomatognathic system.

Effect of Chemical Disinfectants on the Color Stability of Maxillofacial Silicones: An In Vitro Study.

PURPOSE: To evaluate the effect of chemical disinfection on the color stability of room temperature vulcanizing (RTV) maxillofacial silicone elastomer with and without pigment addition. MATERIALS AND METHODS: Sixty specimens were obtained from a RTV maxillofacial silicone. The specimens were randomly divided into 6 groups according to pigments and disinfectant to be used (n = 10). NP-DW-nonpigmented silicone specimens to be immersed in distilled water (control). NP-S- nonpigmented silicone specimens to be rubbed with an anti-bacterial soap. NP-CHX-nonpigmented silicone specimens to be immersed in chlorhexidine gluconate solution (2%). P-DW-pigmented silicone specimens to be immersed in distilled water (control). P-S-pigmented silicone specimens to be rubbed with antibacterial soap. P-CHX-pigmented silicone specimens to be immersed in chlorhexidine gluconate solution (2%). Disinfection was conducted 6 times a day for 60 days simulating 1 year of usage. Color was evaluated after 60 days (disinfection period) using a reflectance spectrophotometer. Color alterations were calculated by the CIE L∗ a∗ b∗ system. Data were analyzed by t-test, one-way ANOVA, and Tukey test (α = 0.05). RESULTS: NP-S and P-S exhibited the highest color alterations, whereas NP-DW and P-DW the lowest color alterations. CONCLUSION: Disinfection procedures affect the color stability of maxillofacial silicone. Chlorhexidine gluconate solution (2%) can be effectively used as a chemical disinfectant for maxillofacial prostheses. Antibacterial soap produced clinically unacceptable color changes in the silicone, hence is not advisable as a disinfectant.

Effect of the simulated Indian and Mediterranean climates on the Shore A hardness of maxillofacial silicone.

PURPOSE: The purpose of this study was to assess and compare the effect of the simulated Indian and Mediterranean climates on the Shore A hardness of a commercially available nonpigmented room temperature vulcanizing maxillofacial silicone. MATERIALS AND METHODS: Sixty specimens were fabricated from A-2000 silicone material (Factor II), using a stainless steel mold of dimension 20 mm × 2 mm. The initial Shore A hardness was noted using a digital durometer. Thirty samples were subjected to the simulated Mediterranean climate (Group I), and the remaining thirty samples were subjected to the Indian tropical climate (Group II) in an accelerated weather chamber to simulate 1 year of clinical use. Final Shore A hardness was noted. A one-way ANOVA and Bonferroni post hoc tests were performed for the Shore A hardness at P < 0.05. RESULTS: The mean initial Shore A hardness for both the groups was 24.9833. After accelerated weathering, Group I showed mean Shore A hardness of 33.0000 whereas Group II showed mean Shore A hardness of 38.0000. CONCLUSIONS: The Shore A hardness of Factor II, before and after accelerated artificial weathering, was statistically significant at 0.05 level (P < 0.05). The change in Shore A hardness was greater in the simulated tropical climate group (Group II) as compared to the simulated Mediterranean climate group (Group I) but within clinical limits.

Comparative evaluation of border molding using two different techniques in maxillary edentulous arches: A clinical study.

PURPOSE: The aim of this in vivo study was to compare the single-step border molding technique using injectable heavy viscosity addition silicone with sectional border molding technique using low fusing impression compound by evaluating the retention of heat cure trial denture bases. MATERIALS AND METHODS: Ten completely edentulous patients in need of prostheses were included in this study. Two border molding techniques, single-step (Group 1) and sectional (Group 2), were compared for retention. Both border molding techniques were performed in each patient. In both techniques, definitive wash impression was made with light viscosity addition silicone. The final results were analyzed using paired t-test to determine whether significant differences existed between the groups. RESULTS: The t-value (3.031) infers that there was a significant difference between Group 1 and Group 2 (P = 0.014). The retention obtained in Group 2 (mean = 9.05 kgf) was significantly higher than that of Group 1 (mean = 8.26 kgf). CONCLUSION: Sectional border molding technique proved to be more retentive as compared to single-step border molding although clinically the retention appeared comparable.

The role of nasendoscopy in the fabrication of a palatopharyngeal obturator - a case report.

Defects confined to the hard palate can be managed with relative ease because it is a static shelf creating oro- nasal separation. Since the soft palate is a dynamic separator between the oral and nasal cavities, defects involving the soft palate require careful consideration. Instrumental visualization methods can aid the fabrication of obturators in patients with such defects and prevent problems of under or over obturation. This case report presents the prosthodontic management of a patient with a Veau class II cleft palate using a palatopharyngeal obturator in order to re-establish normal functions of deglutition and speech. Nasendoscopy was used as an adjunctive procedure to assess velopharyngeal function with the prosthesis.

A comparison of the accuracy of patterns processed from an inlay casting wax, an auto-polymerized resin and a light-cured resin pattern material.

BACKGROUND: Traditionally, inlay casting waxes have been used to fabricate patterns for castings. Newer resin pattern materials offer greater rigidity and strength, allowing easier laboratory and intraoral adjustment without the fear of pattern damage. They also claim to possess a greater dimensional stability when compared to inlay wax. AIMS: This study attempted to determine and compare the marginal accuracy of patterns fabricated from an inlay casting wax, an autopolymerized pattern resin and a light polymerized pattern resin on storage off the die for varying time intervals. MATERIALS AND METHODS: Ten patterns each were fabricated from an inlay casting wax (GC Corp., Tokyo, Japan), an autopolymerized resin pattern material (Pattern resin, GC Corp, Tokyo, Japan) and a light-cured resin pattern material (Palavit GLC, Hereaus Kulzer GmbH, Germany). The completed patterns were stored off the die at room temperature. Marginal gaps were evaluated by reseating the patterns on their respective dies and observing it under a stereomicroscope at 1, 12, and 24 h intervals after pattern fabrication. RESULTS: The results revealed that the inlay wax showed a significantly greater marginal discrepancy at the 12 and 24 h intervals. The autopolymerized resin showed an initial (at 1 h) marginal discrepancy slightly greater than inlay wax, but showed a significantly less marginal gap (as compared to inlay wax) at the other two time intervals. The light-cured resin proved to be significantly more dimensionally stable, and showed minimal change during the storage period. CONCLUSION: The resin pattern materials studied, undergo a significantly less dimensional change than the inlay waxes on prolonged storage. They would possibly be a better alternative to inlay wax in situations requiring high precision or when delayed investment (more than 1 h) of patterns can be expected.

An interdisciplinary approach to reconstruct a fractured tooth under an intact all ceramic crown: case report with four years follow up.

Trauma causing the fracture of a restored tooth with the extracoronal full coverage prosthesis remaining intact is a common occurrence in dental practice. Reconstruction of the damaged tooth foundation and recementation of the crown can pose quite a challenge for the restorative dentist. This case report describes an innovative interdisciplinary chairside technique for the recementation of an all-ceramic crown on a fractured maxillary central incisor. The course of care described is effective, affordable, and saves time in comparison with other treatment options for such clinical situations.