ABSTRACT
Microplastics in the aquatic environment are susceptible to colonization by surrounding microorganisms, which form biofilms over the microplastic's surface. These biofilm-laden microplastics can then interact with a diverse array of contaminants. In the present study, biofilms were grown on microplastics in a laboratory setting using Pseudomonas aeruginosa as a model biofilm-forming bacterium for periods of 5 to 15 days. The sorption of three organic compounds representing different levels of hydrophobicity, namely methylene blue (MB), phenanthrol, and phenanthrene, was used to evaluate the effect of biofilm biomass on the adsorption of organic contaminants to microplastics. The sorption of MB and phenanthrol was found to increase with biofouling time, indicating affinity between these contaminants and the biofilm biomass on the particle. However, the presence of a biofilm did not influence the sorption of phenanthrene on the microplastics. These results suggest that the hydrophobicity of organic contaminants plays a major role in how biofouling of microplastics will influence contaminant sorption by microplastics. For some contaminants, biofilm can enhance the role of microplastics as contaminant vectors. These findings emphasize the need to understand the biomass load on environmental microplastics and the contaminants that associate with it for an accurate representation of the risk associated with microplastics in the environment. Environ Toxicol Chem 2024;43:1973-1981. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
Subject(s)
Biofilms , Biofouling , Microplastics , Microplastics/toxicity , Biofilms/drug effects , Adsorption , Water Pollutants, Chemical/chemistry , Pseudomonas aeruginosa/drug effects , Phenanthrenes/chemistry , Organic Chemicals , Hydrophobic and Hydrophilic InteractionsABSTRACT
When released in the environment, microplastics undergo surface weathering due to mechanical abrasion and ultraviolet exposure. In this study, the adsorption of two model contaminants, phenanthrene and methylene blue, by weathered high density polyethylene (HDPE) and polypropylene (PPE) was evaluated to understand how the microplastics' aging influences contaminant adsorption. Microplastics were aged through an accelerated weathering process using ultraviolet exposure with or without hydrogen peroxide. Adsorption isotherms were conducted for both contaminants on pristine and aged microplastics. The adsorption of organic contaminants was higher on aged microplastics than on pristine ones, with methylene blue having the highest affinity increase with aging at 4.7-fold and phenanthrene having a 1.9-fold increase compared to the pristine particles. To understand the mechanisms involved with higher adsorption of contaminants by aged microplastics, changes in the specific surface area and surface chemistry of aged microplastics were characterized by Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy, zeta potential, X-ray tomography, and Brunauer-Emmett-Teller krypton adsorption analyses. The results of this study show that oxidation of microplastics can enhance the adsorption of organic contaminants, which may increase their role as vectors of contaminants in the aquatic food chain.
Subject(s)
Phenanthrenes , Water Pollutants, Chemical , Adsorption , Methylene Blue , Microplastics , Plastics , Water Pollutants, Chemical/analysisABSTRACT
Biofouling is a major obstacle in engineered systems exposed to aqueous conditions. Many attempts have been made to engineer the surface properties of materials to render them resistant to biofouling. These modifications typically rely on passive antimicrobial or anti-adhesive surface coatings that prevent the deposition of bacteria or inactivate them once they reach the surface. However, no surface modification strategy completely prevents biofilm formation, and, over time, surfaces will be fouled and require cleaning. In this work, we demonstrate the capacity of electrochemical carbon nanotube coatings in dispersing biofilms formed on the surface. A systematic analysis of the biofilm removal kinetics in function of applied current density is made to identify the optimal current conditions needed for efficient surface cleaning. Operating the electrochemically active surface as a cathode produces superior results compared to when it is operated as an anode. Specifically, the 5.00 A m-2 and 2.50 A m-2 cathodic conditions produced rapid cleaning, with complete biofilm dispersal after 2 min of operation. Surface cleaning is attributed to the generation of microbubbles on the surface that scours the surface to remove the adhered biofilm. Energy consumption analyses indicate that the 2.50 A m-2 cathodic condition offers the best combination of cleaning kinetics and energy consumption achieving 99% biofilm removal at an energy cost of ~$ 0.0318 m-2. This approach can be competitive compared to the current chemical cleaning strategies, while offering an opportunity for a more sustainable and integrated approach for biofouling management in engineered systems.
Subject(s)
Biofouling , Nanotubes, Carbon , Biofilms , Biofouling/prevention & control , Electrodes , KineticsABSTRACT
Reverse Osmosis (RO) desalination is an important step of wastewater reuse as it can remove salts and trace contaminants. However, RO also generates high salinity brines that need to be dealt with. Membrane distillation (MD), a process largely unaffected by salinity, provides a way to treat desalination brines up to high water recovery and has been proposed as a solution for RO brine management. However, pore wetting of membranes in MD is one of the major hurdles that prevents its implementation in wastewater treatment systems, as amphiphilic organic compounds present in wastewater can lead to pore wetting and loss of selectivity over time. The objective of this study was to identify a pre-treatment strategy to prevent wetting in MD treatment of municipal wastewater RO brines. We compared three pre-treatments with different separation or removal mechanisms: foam fractionation, advanced oxidation, and ultrafiltration. We evaluated membrane wetting by measuring the change in conductivity in the distillate and identified the most effective pre-treatment to prevent wetting in MD. The results show that wetting is prevented by pre-treating the brine with foam fractionation. The effectiveness of foam fractionation as a wetting control strategy was confirmed for a high wetting propensity synthetic water using sodium dodecyl sulfate as a model wetting compound. Finally, the effect of the pre-treatments on the desalination brine was evaluated to understand the nature of the compounds removed by each treatment. The results of this study will help implement MD as a treatment process for desalination brines in municipal wastewater reuse systems.