Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C-C Bond Formation.

Catalytic C-H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C-C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C-H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C-C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.

Sustainable Synthesis of the Active Pharmaceutical Ingredient Atenolol in Deep Eutectic Solvents.

Atenolol, one of the top five best-selling drugs in the world today used to treat angina and hypertension, and to reduce the risk of death after a heart attack, faces challenges in current synthetic methods to address inefficiencies and environmental concerns. The traditional synthesis of this drug involves a process that generates a large amount of waste and other by-products that need disposal. This study presents a one-pot DES-based sustainable protocol for synthesizing atenolol. The use of the DES allowed the entire process to be conducted with no need for additional bases or catalysts, in short reaction times, under mild conditions, and avoiding chromatographic purification. The overall yield of atenolol was 95%. The scalability of the process to gram-scale production was successfully demonstrated, emphasizing its potential in industrial applications. Finally, the 'greenness' evaluation, performed using the First Pass CHEM21 Metrics Toolkit, highlighted the superiority in terms of the atom economy, the reaction mass efficiency, and the overall process mass intensity of the DES-based synthesis compared with the already existing methods.

Determination of Fe, Cu, and Pb in edible oils using choline chloride:ethylene glycol deep eutectic solvent-based dispersive liquid-liquid microextraction associated with microwave-induced plasma optical emission spectrometry.

A new simple, fast and environmentally friendly deep eutectic solvent based dispersive liquid-liquid microextraction (DES-based DLLME) methodology assisted by vortex is presented for the separation and preconcentration of three elements (i.e., Fe, Cu and Pb) from edible oil samples (i.e., soybean, sunflower, rapeseed, sesame, and olive oil) prior to the determination by microwave-induced plasma optical emission spectrometry (MIP-OES). The deep eutectic solvent selected as extractant (i.e., choline chloride and ethylene glycol, 1:2) is synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H NMR) and differential scanning calorimetry (DSC), and the extraction conditions are optimized by a two steps experimental design. Under the optimum extraction conditions (i.e., diluted sample weight: 8.6 g; DES volume: 100 µL; extraction time: 1 min; centrifugation time and speed: 3 min and 3000 rpm; and dispersion system: vortex) the analytical method presents excellent linearity (i.e., R2 values higher than 0.99) in the range 10-500 µg kg-1, repeatability (i.e., CV values lower than 9.2%), and limits of detection (LOD) values of 3, 2 and 0.7 µg kg-1 for Pb, Fe and Cu, respectively. None of the analytes displayed amounts over the upper limit permitted by law, and recovery values of all analytes evaluated in the different samples using external standard calibration were close to 100%, which excludes significant matrix effects. Finally, AGREEprep metric has been used to evaluate the method greenness (final score of 0.47) and it has been compared successfully with previous publications for the same type of analytes and matrices.

Dispersive liquid-liquid microextraction based on deep eutectic solvent for elemental impurities determination in oral and parenteral drugs by inductively coupled plasma optical emission spectrometry.

A simple, fast, sensitive and green pretreatment method for determination of Cd, Co, Hg, Ni, Pb and V in oral and parenteral drug samples using inductively coupled plasma optical emission spectrometry (ICP OES) has been developed. According to United States Pharmacopoeia (USP), those metals must be reported in all pharmaceutical products for quality control evaluation (i.e., elemental impurities from classes 1 and 2A of USP Chapter 232). To improve the analytical capabilities of ICP OES, a dispersive liquid-liquid microextraction (DLLME) has performed using a safe, cheap and biodegradable deep eutectic solvent (DES) as extractant solvent (a mixture of 2:1 M ratio of DL-menthol and decanoic acid). Seven parameters affecting the microextraction efficiency have carefully optimized by multivariate analysis. Under optimized conditions, the DES-based DLLME-ICP OES procedure improved limit of quantitation (LOQ) values on range from 12 to 85-fold and afforded an enrichment factor on average 60-times higher than those obtained to direct ICP OES analysis. Consequently, LOQ values for Cd, Co, Hg, Ni, Pb and V have been on average 10-times lower than target limits recommended for drugs from parenteral route of administration. Trueness has evaluated by addition and recovery experiments following USP recommendations for three oral drug samples in liquid dosage form and three parenteral drugs. Recovery and RSD values have been within the range of 90-109% and 1-6%, respectively. All analytes were below the respectives LOQ values, hence, lower than the limits proposed by USP Chapter 232.

New guidelines for testing "Deep eutectic solvents" toxicity and their effects on the environment and living beings.

Deep eutectic solvents (DESs) were described at the beginning of this century as an alternative to ionic liquids (ILs) in green chemistry. Despite their obvious sustainable advantages as reaction media, there is still controversy about their potential toxicity. Most of the ecotoxicity assays done up to now involving DESs are based on antibiograms. This is not a good approach due to the high density and viscosity of most DESs already described. Additionally, antibiograms do not allow continuous monitoring of neither cellular growth nor changes on physicochemical parameters like culture acidification due to cellular growth or DESs metabolization. This work starts by displaying advantages and disadvantages of the DESs toxicity assays already reported. Then, using a new DES recently described and Escherichia coli as a model microorganism, liquid cultures with continuous monitoring of pH, temperature, shaking and optical density have been used, for the first time, to quantify potential toxicity of the DES as well as the degree of the cellular tolerance (in preadapted and non-preadapted cells). The results obtained show that this new DES is not toxic for E. coli at concentrations up to 300 mM and cellular preadaptation was crucial for the cells to grow. At concentrations between 300 mM and 450 mM, cells can tolerate this DES. Above 600 mM, the DES is toxic causing complete inhibition of growth. This toxicity is not only due to the chemical composition of the DES, but also due to the high acidification of the media caused by the DES hydrolysis during cellular growth. The consequences of sterilization procedures on the DES stability are also analysed into detail, finding that sterilization by autoclave promotes DES hydrolysis. From these results, new guidelines are proposed for furthers studies aiming to characterize and quantify DESs toxicity.

Palladium Mesoionic Carbene Pre-catalyst for General Cross-Coupling Transformations in Deep Eutectic Solvents.

A strong σ-donor mesoionic carbene ligand has been synthesized and applied to four different palladium-catalyzed cross-coupling transformations, proving the catalyst/medium compatibility and the increased activity of this system over previous reports in Deep Eutectic Solvent medium. Some cross-coupling processes could be carried out at room temperature and using aryl chlorides as starting materials. The possible implementation of multistep synthesis in eutectic mixtures has also been explored. The presence of palladium nanoparticles in the reaction media has been evaluated and correlated to the observed activity.

Deep Eutectic Solvents as Reaction Media for the Palladium-Catalysed C-S Bond Formation: Scope and Mechanistic Studies.

A unique jigsaw catalytic system based on deep eutectic solvents and palladium nanoparticles where C-S bonds are formed from aryl boronic acids and sodium metabisulfite, is introduced. The functionalization step is compatible with a broad spectrum of reagents such as nucleophiles, electrophiles or radical scavengers. This versatile approach allows the formation of different types of products in an environmentally friendly medium by selecting the components of the reaction, which engage one with another as pieces in a jigsaw. This simple procedure avoids the use of toxic volatile organic solvents allowing the formation of complex molecules in a one-pot reaction under mild conditions. Despite the fact that only 1 mol % of metal loading is used, the recyclability of the catalytic system is possible. Kinetic experiments were performed and the reaction order for all reagents, catalyst and ligand was determined. The obtained results were compared to palladium nanocrystals of different known shapes in order to shed some light on the properties of the catalyst.

Recent Advances in Asymmetric Organocatalyzed Conjugate Additions to Nitroalkenes.

The asymmetric conjugate addition of carbon and heteroatom nucleophiles to nitroalkenes is a very interesting tool for the construction of highly functionalized synthetic building blocks. Thanks to the rapid development of asymmetric organocatalysis, significant progress has been made during the last years in achieving efficiently this process, concerning chiral organocatalysts, substrates and reaction conditions. This review surveys the advances in asymmetric organocatalytic conjugate addition reactions to α,ß-unsaturated nitroalkenes developed between 2013 and early 2017.

First practical cross-alkylation of primary alcohols with a new and recyclable impregnated iridium on magnetite catalyst.

A new impregnated iridium on magnetite catalyst has been prepared, characterized, used and recycled, up to ten times with practically the same activity, for the first practical cross-alkylation of primary alcohols. The catalyst showed a wide reaction scope, is easy to prepare and handle, and it could be removed from the reaction medium just by magnetic sequestering.

Impregnated ruthenium on magnetite as a recyclable catalyst for the N-alkylation of amines, sulfonamides, sulfinamides, and nitroarenes using alcohols as electrophiles by a hydrogen autotransfer process.

Various impregnated metallic salts on magnetite have been prepared, including cobalt, nickel, copper, ruthenium, and palladium salts, as well as a bimetallic palladium-copper derivative. Impregnated ruthenium catalyst is a versatile, inexpensive, and simple system for the selective N-monoalkylation of amino derivatives with poor nucleophilic character, such as aromatic and heteroaromatic amines, sulfonamides, sulfinamides, and nitroarenes, using in all cases alcohols as the initial source of the electrophile, through a hydrogen autotransfer process. In the case of sulfinamides, this is the first time that these amino compounds have been alkylated following this strategy, allowing the use of chiral sulfinamides and secondary alcohols to give the alkylated compound with a diastereomeric ratio of 92:8. In these cases, after alkylation, a simple acid deprotection gave the expected primary amines in good yields. The ruthenium catalyst is quite sensitive, and small modifications of the reaction medium can change the final product. The alkylation of amines using potassium hydroxide renders the N-monoalkylated amines, and the same protocol using sodium hydroxide yields the related imines. The catalyst can be easily removed by a simple magnet and can be reused up to ten times, showing the same activity.

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles.

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.

Impregnated copper on magnetite as recyclable catalyst for the addition of alkoxy diboron reagents to C-C double bonds.

A simple protocol for the borylation with use of impregnated copper on magnetite is described. The reactions showed a very broad scope and all type of olefins could be used with similar results. The catalyst could be easily removed by a magnet and it could be reused several times, showing similar activity.

Efficiency in chemistry: from hydrogen autotransfer to multicomponent catalysis.

A hydrogen autotransfer reaction has been applied to the α-alkylation of ketones, with primary alcohols as the electrophilic component, either under homogeneous (using a Ru complex as catalyst) or under heterogeneous (using Ni nanoparticles) conditions. This process is both very efficient (concerning atom economy) and ecologically friendly (water as the only by-product generated). On the other hand, three multicomponent reactions, namely, the Strecker reaction (without any catalyst), the aza-Sakurai process (catalyzed by ferrite), and the addition of in situ generated Zn enolates to chiral sulfinylimines (catalyzed by Cu), have proven to be very efficient in the generation of a diversity of polyfunctionalized molecules.

Impregnated copper on magnetite: an efficient and green catalyst for the multicomponent preparation of propargylamines under solvent free conditions.

Impregnated copper on magnetite is a versatile, inexpensive and simple catalyst for the selective multicomponent reaction of terminal alkynes, aldehydes and secondary amines to give the corresponding propargylamines with excellent yields. The catalyst can be easily recovered and reused by using a simple magnet. The process could be repeated up to ten times without losing its activity.

Selective N-monoalkylation of aromatic amines with benzylic alcohols by a hydrogen autotransfer process catalyzed by unmodified magnetite.

A new catalyst for an old material: magnetite is a good catalyst for the selective N-alkylation of aromatic amines using benzylic alcohols as electrophiles. The process could be repeated up to eight times without losing effectiveness. The catalyst recycling is very easy, using a simple magnet. The catalyst is selective and could discriminate between aromatic and aliphatic amines, as well as between benzylic and aliphatic alcohols, as the reactions only take place with aromatic amines and benzylic alcohols.

Transition-metal-free indirect friedlander synthesis of quinolines from alcohols.

The synthesis of polysubstituted quinolines can be easily and greenly accomplished by the direct reaction between the corresponding 2-aminobenzylic alcohol derivative and either a ketone or alcohol in the presence of a base, without any transition-metal catalyst.

Alcohols as electrophiles in C--C bond-forming reactions: the hydrogen autotransfer process.

The hydrogen autotransfer process involves an initial oxidative hydrogen elimination, followed by different types of reactions, and is completed with a reductive hydrogen addition to give the final product. The sequence allows the alkylation of different nucleophilic agents using environmentally benign alcohols as electrophiles, mild conditions, and soft bases, with water produced as the only waste material. Recent examples of modulating the organometallic catalyst have also lent themselves to expansion of the range of available substrates, as described in this Minireview.

trans-1-Sulfonylamino-2-isoborneolsulfonylaminocyclohexane derivatives: excellent chiral ligands for the catalytic enantioselective addition of organozinc reagents to ketones.

The catalytic enantioselective addition of different organozinc reagents (such as alkyl and aryl derivatives or in situ generated aryl, allyl alkenyl, and alkynyl derivatives obtained through different transmetallation processes) to simple ketones has been accomplished by using titanium tetraisopropoxide and chiral ligands derived from substituted trans-1-sulfonylamino-2-isoborneolsulfonylaminocyclohexane, producing the corresponding tertiary alcohols with enantiomeric excesses (ee) up to >99 %. A simple and efficient procedure for the synthesis of the chiral ligands used in these reactions is described.