M1 to M2 induction in macrophages using a retinoic acid-releasing mesenchymal stem cell scaffold.

BACKGROUND: Modulation of macrophage polarization is required for effective tissue repair and regenerative therapies. Therapeutic modulation of macrophages from an inflammatory M1 to a fibrotic M2 phenotype could help in diseases, such as chronic wounds, which are stalled in a prolonged and heightened inflammatory stage within the wound healing process. OBJECTIVE: This study evaluates the efficiency of a pullulan/gelatin nanofiber scaffold loaded with retinoic acid (RA) and adipose-derived mesenchymal stem cells (ASCs) to modulate M1 to M2 anti-inflammatory transition. METHODS: Scaffolds were fabricated by electrospinning, and crosslinked using ethylene glycol diglycidyl ether (EGDE). Exposure of RA and/or ASCs to cultured macrophages have been shown to promote M1 to M2 transition. Pullulan was chosen as a scaffold material due to its ability to quench reactive oxygen species, key signaling molecules that play an important role in the progression of inflammation, as well as for its excellent mechanical properties. Gelatin was chosen as an additional scaffold component due to the presence of cell-binding motifs and its biocompatibility. Scaffold compositions examined were 75:25 and 50:50, pullulan:gelatin. The scaffolds were crosslinked in 1:70 and 1:50 EGDE:EtOH. The scaffold composition was determined via FTIR. For the present study, the 75:25 pullulan:gelatin crosslinked with 1:70 EGDE:EtOH, forming nanofibers 328 ± 47.9 nm (mean ± SD) in diameter, was chosen as the scaffold composition due to its lower degradation and release rate, which allows a sustained delivery of RA. RESULTS: The scaffold composition degraded to approximately 80% after 14 days, with approximately 38% of the drug released after 7 days. THP-1 monocytic cells were induced into a M1 macrophage phenotype through stimulation with lipopolysaccharide (LPS) and gamma interferon (IFN-γ). These M1 macrophages were the exposed to scaffolds loaded with RA and ASCs, to induce differentiation to an M2 phenotype. CONCLUSION: Gene expression quantitation by qPCR showed a reduction of M1 biomarkers, tumor necrosis factor alpha (TNFα) and interleukin 1ß (IL1ß), and an increase of M2 biomarker CCL22 after 2 days of exposure, suggesting successful M1 to M2 transition.

Differentiation of adipose-derived stem cells to chondrocytes using electrospraying.

An important challenge in the fabrication of tissue engineered constructs for regenerative medical applications is the development of processes capable of delivering cells and biomaterials to specific locations in a consistent manner. Electrospraying live cells has been introduced in recent years as a cell seeding method, but its effect on phenotype nor genotype has not been explored. A promising candidate for the cellular component of these constructs are human adipose-derived stem cells (hASCs), which are multipotent stem cells that can be differentiated into fat, bone, and cartilage cells. They can be easily and safely obtained from adipose tissue, regardless of the age and sex of the donor. Moreover, these cells can be maintained and expanded in culture for long periods of time without losing their differentiation capacity. In this study, hASCs directly incorporated into a polymer solution were electrosprayed, inducing differentiation into chondrocytes, without the addition of any exogenous factors. Multiple studies have demonstrated the effects of exposing hASCs to biomolecules-such as soluble growth factors, chemokines, and morphogens-to induce chondrogenesis. Transforming growth factors (e.g., TGF-ß) and bone morphogenetic proteins are particularly known to play essential roles in the induction of chondrogenesis. Although growth factors have great therapeutic potential for cell-based cartilage regeneration, these growth factor-based therapies have presented several clinical complications, including high dose requirements, low half-life, protein instability, higher costs, and adverse effects in vivo. The present data suggests that electrospraying has great potential as hASCs-based therapy for cartilage regeneration.

Effect of Pulsed Electromagnetic Fields on Human Mesenchymal Stem Cells Using 3D Magnetic Scaffolds.

Alternative bone regeneration strategies that do not rely on harvested tissue or exogenous growth factors are needed. One of the major challenges in tissue reconstruction is recreating the bone tissue microenvironment using the appropriate combination of cells, scaffold, and stimulation to direct differentiation. This study presents a bone regeneration formulation that involves the use of human adipose-derived mesenchymal stem cells (hASCs) and a three-dimensional (3D) hydrogel scaffold based on self-assembled RADA16 peptides containing superparamagnetic iron oxide nanoparticles (NPs). Although superparamagnetic NPs could be used as stimulus to manipulate the cell proliferation and differentiation, in this paper their use is explored for assisting osteogenic differentiation of hASCs in conjunction with direct stimulation by extremely low-frequency pulsed electromagnetic fields (pEMFs). Cellular morphology, proliferation, and viability, as well as alkaline phosphatase activity, calcium deposition, and osteogenic capacity were monitored for cells cultured up to 21 days in the 3D construct. The results show that the pEMFs and NPs do not have any negative effect on cell viability, but instead distinctly induced early differentiation of hASCs to an osteoblastic phenotype, when compared with cells without biophysical stimulation. This effect is attributed to synergy between the pEMFs and NPs, which may have stimulated mechanotransduction pathways, which, in turn activated biochemical signals between cells to differentiate or proliferate. This approach may offer a safe and effective option for the treatment of non-union bone fractures. Bioelectromagnetics. © 2020 The Authors. Bioelectromagnetics published by Wiley Periodicals, Inc.

Graphene oxide-chloroquine nanoconjugate induce necroptotic death in A549 cancer cells through autophagy modulation.

AIM: Chloroquine (Chl) has shown its potential in cancer therapy and graphene oxide (GO) exhibited excellent tumor-targeting ability, biocompatibility and low toxicity. We have endeavored to conjugate Chl to GO sheets and investigated the nonproliferation action on A549 cell lines along with cell signaling pathways. MATERIALS & METHODS: Cellular toxicity, autophagic flux modulation and cell death mechanism induced by GO-Chl have been investigated on A549 cell lines. RESULTS & CONCLUSION: GO-Chl induces accumulation of autophagosomes (monodansylcadaverine staining, green fluorescence protein-tagged LC3 plasmid and transmission electron microscopy observations) in A549 cells through the blockade of autophagic flux that serves as scaffold for necrosome assembling and activates necroptotic cell death. GO-Chl nanoconjugate could be used as an effective cancer therapeutic agent, by targeting the autophagy necroptosis axis.

Tissue Engineering Strategies for Myocardial Regeneration: Acellular Versus Cellular Scaffolds?

Heart disease remains one of the leading causes of death in industrialized nations with myocardial infarction (MI) contributing to at least one fifth of the reported deaths. The hypoxic environment eventually leads to cellular death and scar tissue formation. The scar tissue that forms is not mechanically functional and often leads to myocardial remodeling and eventual heart failure. Tissue engineering and regenerative medicine principles provide an alternative approach to restoring myocardial function by designing constructs that will restore the mechanical function of the heart. In this review, we will describe the cellular events that take place after an MI and describe current treatments. We will also describe how biomaterials, alone or in combination with a cellular component, have been used to engineer suitable myocardium replacement constructs and how new advanced culture systems will be required to achieve clinical success.

Nanostructured gold dsDNA sensor for early detection of breast cancer by beta protein 1 (BP1).

Beta protein 1 (BP1) is a homeobox protein expressed in 80% of breast cancer cells in either estrogen receptor (ER) positive or ER negative breast cancer. However, it is barely detectable in normal breast tissues. In this project we present an electrochemical DNA nanostructured gold biosensor for detection of BP1. The gold sensor is first electrochemically nanostructured in 0.5 M sulfuric acid to reach superior conductivity, larger surface area, and higher stability. Nanostructured gold surface was characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The nanostructured gold sensor is then modified with double-stranded (ds) DNA mapping the genomic sequence that contains the binding site for BP1. A redox-active probe (methylene blue) was intercalated in dsDNA to monitor the binding event of BP1. A linear correlation of the electrochemical response by concentration of BP1 was obtained (R2 = 0.998) with a limit of detection of 1.2 nM. This nanostructured gold dsDNA sensor is shown to be sensitive, selective, stable, and reusable allowing for its potential clinical use.

Scaffold design for bone regeneration.

The use of bone grafts is the standard to treat skeletal fractures, or to replace and regenerate lost bone, as demonstrated by the large number of bone graft procedures performed worldwide. The most common of these is the autograft, however, its use can lead to complications such as pain, infection, scarring, blood loss, and donor-site morbidity. The alternative is allografts, but they lack the osteoactive capacity of autografts and carry the risk of carrying infectious agents or immune rejection. Other approaches, such as the bone graft substitutes, have focused on improving the efficacy of bone grafts or other scaffolds by incorporating bone progenitor cells and growth factors to stimulate cells. An ideal bone graft or scaffold should be made of biomaterials that imitate the structure and properties of natural bone ECM, include osteoprogenitor cells and provide all the necessary environmental cues found in natural bone. However, creating living tissue constructs that are structurally, functionally and mechanically comparable to the natural bone has been a challenge so far. This focus of this review is on the evolution of these scaffolds as bone graft substitutes in the process of recreating the bone tissue microenvironment, including biochemical and biophysical cues.

Water soluble molybdenocene complexes: synthesis, cytotoxic activity and binding studies to ubiquitin by fluorescence spectroscopy, circular dichroism and molecular modeling.

Four new molybdenocene complexes, Cp2Mo(l-ascorbato), Cp2Mo(6-O-palmitoyl-l-ascorbato), [Cp2Mo(ethyl maltolato)]Cl and Cp2Mo((2S)-2-amino-3-methyl-3-thiolato-butanoato), were synthesized and structurally characterized by standard analytical methods. The cytotoxicity of these complexes was assessed on colon HT-29 and breast MCF-7 cancer cell lines using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. A higher cytotoxic activity was shown by all the new complexes on the MCF-7 cells over the Cp2MoCl2 complex. The complexes Cp2Mo(l-ascorbato), Cp2Mo(6-O-palmitoyl-l-ascorbato) and [Cp2Mo(ethyl maltolato)]Cl displayed a stronger cytotoxic activity on colon cancer HT-29 cell line, over the molybdenocene dichloride (Cp2MoCl2). In contrast, Cp2Mo((2S)-2-amino-3-methyl-3-thiolato-butanoato) exhibited proliferative properties on this cell line. Ubiquitin (Ub)-molybdenocene interactions were investigated using cyclic voltammetry, fluorescence quenching spectroscopy, circular dichroism (CD) and molecular modeling. The thermodynamic parameters (ΔH and ΔS) obtained using fluorescence quenching spectra and van't Hoff plot indicate the Ub-molybdenocene interactions are mainly hydrophobic. The CD data also support hydrophobic interactions with conformational changes in the Ub protein. Docking studies using molecular modeling revealed the amino acids involved in the Ub-molybdenocene interactions and corroborated the hydrophobic nature of the binding combined with hydrogen bonding.

Evaluation of the cytotoxic effect of camptothecin solid lipid nanoparticles on MCF7 cells.

Camptothecin (CPT) and its analogs exhibit remarkable anti-tumor activity, due to their ability to inhibit DNA topoisomerase I. However, its use is limited by the lack of solubility and stability of the active lactone form. An attractive alternative is the encapsulation of CPT within liposomes. In this study, CPT was incorporated into solid lipid nanoparticles (SLN) based on the triglyceride, Compritol 888 ATO, using supercritical fluid technology without requiring the use of harmful solvents. This drug delivery system was characterized and its cytotoxicity effect was evaluated by measuring MCF7 and MCF10A cell viability as a function of drug loading during a 48-h treatment. Results showed that after 10 h of treatment, MCF7 cells displayed an IC50 of 0.23±0.034 µM at a 1:5 (CPT:SLN) loading and 0.22±0.027 µM at a 1:10 loading, whereas MCF10A cells displayed an IC50 of 0.40±0.036 µM at 1:5 and 0.60±0.063 µM at 1:10. On the other hand, the IC50 of free CPT was 0.57±0.035 µM and 1.07±0.077 µM for MCF7 and MCF10A cells, respectively. Cellular uptake and retention measurements in both cells displayed a two-fold increase when using the SLN formulation. The results from this study showed that the cytotoxic effects of CPT in a SLN formulation improved when compared with those seen with free CPT. The results of this study showed that delivery of CPT as a SLN formulation could be a promising strategy for enhancing its chemotherapeutic effects.

Recent advances in ZnO nanostructures and thin films for biosensor applications: review.

Biosensors have shown great potential for health care and environmental monitoring. The performance of biosensors depends on their components, among which the matrix material, i.e., the layer between the recognition layer of biomolecule and transducer, plays a crucial role in defining the stability, sensitivity and shelf-life of a biosensor. Recently, zinc oxide (ZnO) nanostructures and thin films have attracted much interest as materials for biosensors due to their biocompatibility, chemical stability, high isoelectric point, electrochemical activity, high electron mobility, ease of synthesis by diverse methods and high surface-to-volume ratio. ZnO nanostructures have shown the binding of biomolecules in desired orientations with improved conformation and high biological activity, resulting in enhanced sensing characteristics. Furthermore, compatibility with complementary metal oxide semiconductor technology for constructing integrated circuits makes ZnO nanostructures suitable candidate for future small integrated biosensor devices. This review highlights recent advances in various approaches towards synthesis of ZnO nanostructures and thin films and their applications in biosensor technology.

Combinatorial growth of oxide nanoscaffolds and its influence in osteoblast cell adhesion.

We report a novel method for high-throughput investigations on cell-material interactions based on metal oxide nanoscaffolds. These scaffolds possess a continuous gradient of various titanium alloys allowing the compositional and morphological variation that could substantially improve the formation of an osseointegrative interface with bone. The model nanoscaffold has been fabricated on commercially pure titanium (cp-Ti) substrate with a compositional gradients of tin (Sn), chromium (Cr), and niobium (Nb) deposited using a combinatorial approach followed by annealing to create native oxide surface. As an invitro test system, the human fetal osteoblastic cell line (hFOB 1.19) has been used. Cell-adhesion of hFOB 1.19 cells and the suitability of these alloys have been evaluated for cell-morphology, cell-number, and protein adsorption. Although, cell-morphology was not affected by surface composition, cell-proliferation rates varied significantly with surface metal oxide composition; with the Sn- and Nb-rich regions showing the highest proliferation rate and the Cr-rich regions presenting the lowest. The results suggest that Sn and Nb rich regions on surface seems to promote hFOB 1.19 cell proliferation and may therefore be considered as implant material candidates that deserve further analysis.

The anticancer activity of chloroquine-gold nanoparticles against MCF-7 breast cancer cells.

In the present study, 11-mercaptoundecanoic acid-modified gold nanoparticles (∼7 nm) were conjugated with chloroquine to explore their potential application in cancer therapeutics. The anticancer activity of chloroquine-gold nanoparticle conjugates (GNP-Chl) was demonstrated in MCF-7 breast cancer cells. The MCF-7 cells were treated with different concentrations of GNP-Chl conjugates, and the cell viability was assayed using trypan blue, resulting in an IC(50) value of 30 ± 5 µg/mL. Flow cytometry analysis revealed that the major pathway of cell death was necrosis, which was mediated by autophagy. The drug release kinetics of GNP-Chl conjugates revealed the release of chloroquine at an acidic pH, which was quantitatively estimated using optical absorbance spectroscopy. The nature of stimuli-responsive drug release and the inhibition of cancer cell growth by GNP-Chl conjugates could pave the way for the design of combinatorial therapeutic agents, particularly nanomedicine, for the treatment of cancer.

Zinc oxide nanorods modified indium tin oxide surface for amperometric urea biosensor.

ZnO nanorods (ZnONR) grown onto indium-tin-oxide (ITO) coated glass surface using zinc nitrate hexahydrate/hexamethylenetetramine (HMT) in aqueous phase has been utilized for urea biosensor. Urease (Urs) was immobilized onto ZnONR/ITO at physiological pH via electrostatic interactions between Urs and ZnO to fabricate Urs/ZnONR/ITO bioelectrode. ZnONR/ITO electrode has been characterized using XRD, FE-SEM techniques and Urs/ZnONR/ITO bioelectrode using electrochemistry. The XRD and FE-SEM measurements confirm the formation of ZnO nanorods in wurtzite structure. Cyclic voltammetric and amperometric measurements on the Urs/ZnONR/ITO biolectrode for urea concentrations in the range of 1-20 mM reveal 0.4 microA mM(-1) sensitivity, with a response time of 3 seconds, and a detection limit of 0.13 mM. The Michaelis-Menten constant (Km) was calculated to be 9.09 mM. Results indicate that ZnO nanorods provide suitable microenvironment for urease immobilization and can be utilized in biosensor design and other biological applications.