Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 44
Filter
1.
Dent Mater ; 39(7): 625-633, 2023 07.
Article in English | MEDLINE | ID: mdl-37179237

ABSTRACT

OBJECTIVE: To analyze the impact of different post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of additively manufactured zirconia. METHODS: Disc-shaped specimens (N = 100) were 3D-printed from 3 mol%-yttria-stabilized zirconia (material: LithaCon 3Y 210; printer: CeraFab 7500, Lithoz) and were cleaned with five different methods (n = 20): (A) 25 s of airbrushing with the dedicated cleaning solution (LithaSol 30®, Lithoz) and 1-week storage in a drying oven (40 °C); (B) 25 s airbrushing (LithaSol 30®) without drying oven; (C) 30 s ultrasonic bath (US) filled with Lithasol30®; (D) 300 s US filled with LithaSol 30®; (E) 30 s US filled with LithaSol 30® followed by 40 s of airbrushing (LithaSol 30®). After cleaning, the samples were sintered. Geometry, transmission, roughness (Ra, Rz), characteristic strengths (σ0), and Weibull moduli (m) were analyzed. Statistical analyses were performed using Kolmogorov-Smirnov-, t-, Kruskal-Wallis-, and Mann-Whitney-U-tests (α < 0.05). RESULTS: Short US (C) resulted in the thickest and widest samples. Highest transmission was found for US combined with airbrushing (E, p ≤ 0.004), followed by D and B (same range, p = 0.070). Roughness was lowest for US combined with airbrushing (E, p ≤ 0.039), followed by A and B (same range, p = 0.172). A (σ0 = 1030 MPa, m = 8.2), B (σ0 = 1165 MPa, m = 9.8), and E (σ0 = 1146 MPa, m = 8.3) were significantly stronger (p < 0.001) and substantially more reliable than C (σ0 = 480 MPa, m = 1.9) and D (σ0 = 486 MPa, m = 2.1). SIGNIFICANCE: For 3D-printed zirconia, cleaning strategy selection is important. Airbrushing (B) and short US combined with airbrushing (E) were most favorable regarding transmission, roughness, and strength. Ultrasonic cleaning alone was ineffective (short duration) or detrimental (long duration). Strategy E could be particularly promising for hollow or porous structures.


Subject(s)
Flexural Strength , Zirconium , Materials Testing , Surface Properties , Zirconium/chemistry , Printing, Three-Dimensional , Ceramics/chemistry , Dental Materials/chemistry
2.
Z Gerontol Geriatr ; 55(1): 27-31, 2022 Feb.
Article in English | MEDLINE | ID: mdl-34170351

ABSTRACT

BACKGROUND: The dementia syndrome compromises effective communication and may thus lead to social isolation, psychological distress and decreased quality of life. It is therefore of importance to maintain communication capacity in dementia as long as possible. MATERIAL AND METHODS: A total of 24 professional caregivers from 8 nursing homes were assigned to train 254 of their respective colleagues using the train-the-trainer program MultiTANDEMplus. As in the 6 control nursing homes, severity of dementia, depressive symptoms and communication capacity were assessed in a total of 358 residents at baseline and 21 months later. Overall, 189 residents completed the study. RESULTS: Communication capacity declined in control home residents but remained stable in the intervention group although dementia severity increased in both groups. The intervention group exhibited significantly fewer depressive symptoms after the intervention than the control group. CONCLUSION: A standardized training of communication skills for professional caregivers can stabilize communication capacity and reduce depressive symptoms in nursing home residents. These effects are likely sustainable and could be demonstrated 21 months postintervention.


Subject(s)
Dementia , Quality of Life , Communication , Humans , Nursing Homes , Prospective Studies
3.
Dent Mater ; 35(3): e53-e62, 2019 03.
Article in English | MEDLINE | ID: mdl-30686709

ABSTRACT

OBJECTIVE: In the past, discrepancies between laboratory results and clinical behavior have been observed for all-ceramic restorations. This analysis of fracture resistance of zirconia-based inlay-retained fixed partial dentures (IRFPDs) aimed at identifying correlations between an in-vitro test setup and the clinical situation. The effects of tooth material, tooth mobility, restoration design, load direction, and different cements were taken into account. METHODS: The in-vitro test model and IRFPD were reverse engineered (Geomagic DesignX) and meshed predominantly with hexahedral elements (approx. 230,000 elements). Homogenous, linear-elastic behavior was assumed for all materials. On the basis of the calculated stresses (ANSYS 18.2) and already known strength distributions for the restorative materials fracture resistance of the complete restoration and force at initial damage (fracture within the veneer) was estimated on the basis of the principal stress hypothesis. Differences depending on the assumed clinical situation and effects of different variables on fracture resistance were evaluated. RESULTS: All variables tested in the finite element analysis affected the calculated fracture resistance of the IRFPD. Use of resin teeth led to an underestimation of fracture resistance by up to -57%, whereas fracture resistance of IRFPDs on metal abutment teeth was close to the clinical reference (-6% to +15%). Good correlation between the clinical scenario and that using metal teeth could only be achieved when the natural resilience of the abutment teeth was simulated. SIGNIFICANCE: When testing fracture resistance of zirconia-based IRFPDs, metal abutment teeth in combination with simulated tooth resilience can reflect the clinical situation accurately.


Subject(s)
Denture Design , Inlays , Ceramics , Dental Porcelain , Dental Stress Analysis , Denture, Partial, Fixed , Finite Element Analysis , Materials Testing , Zirconium
4.
AJNR Am J Neuroradiol ; 39(7): 1322-1329, 2018 07.
Article in English | MEDLINE | ID: mdl-29794233

ABSTRACT

BACKGROUND AND PURPOSE: The incidence of metallic dental restorations and implants is increasing, and head and neck MR imaging is becoming challenging regarding artifacts. Our aim was to evaluate whether multiple-slab acquisition with view angle tilting gradient based on a sampling perfection with application-optimized contrasts by using different flip angle evolution (MSVAT-SPACE)-STIR and slice-encoding for metal artifact correction (SEMAC)-STIR are beneficial regarding artifact suppression compared with the SPACE-STIR and TSE-STIR in vitro and in vivo. MATERIALS AND METHODS: At 3T, 3D artifacts of 2 dental implants, supporting different single crowns, were evaluated. Image quality was evaluated quantitatively (normalized signal-to-noise ratio) and qualitatively (2 reads by 2 blinded radiologists). Feasibility was tested in vivo in 5 volunteers and 5 patients, respectively. RESULTS: Maximum achievable resolution and the normalized signal-to-noise ratio of MSVAT-SPACE-STIR were higher compared with SEMAC-STIR. Performance in terms of artifact correction was dependent on the material composition. For highly paramagnetic materials, SEMAC-STIR was superior to MSVAT-SPACE-STIR (27.8% smaller artifact volume) and TSE-STIR (93.2% less slice distortion). However, MSVAT-SPACE-STIR reduced the artifact size compared with SPACE-STIR by 71.5%. For low-paramagnetic materials, MSVAT-SPACE-STIR performed as well as SEMAC-STIR. Furthermore, MSVAT-SPACE-STIR decreased artifact volume by 69.5% compared with SPACE-STIR. The image quality of all sequences did not differ systematically. In vivo results were comparable with in vitro results. CONCLUSIONS: Regarding susceptibility artifacts and acquisition time, MSVAT-SPACE-STIR might be advantageous over SPACE-STIR for high-resolution and isotropic head and neck imaging. Only for materials with high-susceptibility differences to soft tissue, the use of SEMAC-STIR might be beneficial. Within limited acquisition times, SEMAC-STIR cannot exploit its full advantage over TSE-STIR regarding artifact suppression.


Subject(s)
Artifacts , Dental Implants/adverse effects , Image Interpretation, Computer-Assisted/methods , Magnetic Resonance Imaging/methods , Adult , Female , Humans , Image Enhancement/methods , Male , Metals , Middle Aged
5.
Eur J Dent Educ ; 22(3): e582-e587, 2018 Aug.
Article in English | MEDLINE | ID: mdl-29665167

ABSTRACT

OBJECTIVES: To evaluate the effect of small-group education including practical training on dental students' shade determination performance compared with a control group. METHODS: Sixty-three non-colour-blind preclinical students were asked to participate and belonged to an intervention (n = 31) and a control (n = 32) group, respectively. All students received a lecture on dental shade determination. The members of the intervention group were educated and practically trained in small groups in addition. Ten volunteers, each with unrestored upper right middle and lateral incisors, were recruited. The students of both the intervention and control groups were then asked to determine the colour of the volunteers' test teeth using the 3D-Master shade guide (Vita Zahnfabrik, Bad Säckingen, Germany) under artificial daylight illumination. For analytical purposes, the CIE L*a*b* coordinates were obtained using a spectrophotometer. Colour differences, ΔE, between all shade tabs selected by the students and the natural teeth were calculated. ΔE observed in the intervention and control groups were compared using t tests. In addition, a multi-level regression model was adjusted for age and gender. RESULTS: Mean (SD) ΔE between the shade tabs selected by the students and the natural teeth in the intervention and control groups were 3.8 (2.1) and 4.3 (2.3), respectively (P < .001). The effect of group membership was reproduced in multivariate analysis whereas age and gender did not reach statistical significance. CONCLUSIONS: With more intensive education and practical training the ability to perform clinical shade determinations improved for students without previous clinical experience. The results obtained support the idea of implementing thematic small-group education in the dental curriculum.


Subject(s)
Color Perception , Color/standards , Education, Dental/methods , Group Processes , Prosthesis Coloring/methods , Students, Dental/psychology , Tooth , Curriculum , Esthetics, Dental , Female , Humans , Male , Regression Analysis
6.
Odontology ; 105(2): 155-161, 2017 Apr.
Article in English | MEDLINE | ID: mdl-27206915

ABSTRACT

The purpose of this in vitro study was to evaluate the effect of enamel sealants on bleaching of natural teeth by use of 40 % hydrogen peroxide in a dental surgery. The color stability of the results from bleaching was, furthermore, determined 10 months after the bleaching procedure. In a standardized setting, four sealants (Pro Seal®, Light Bond™ Sealant, Protecto®, and Clinpro™ XT Varnish) were applied to and removed from human teeth in accordance with the manufacturer's instructions. Natural teeth served as medium; half of the teeth were sealed and the others served as controls. Hydrogen peroxide gel (40 %; Opalescence Boost; Ultradent Products, South Jordan, UT, USA) was used as bleaching agent. Color measurement was performed with a spectroradiometer (Photoresearch PR670) before the bleaching process (T1) and 24 h (T2) and 10 months (T3) after bleaching. The spectroradiometer results were expressed by use of the Commission Internationale de l'Éclairage (CIE) L*a*b* color notation. The L*, a*, and b* values of the sealed and the unsealed surfaces were not significantly different at any time during the study (p > 0.05), irrespective of the sealant used. Ten months after the bleaching process, mean L*, a*, and b* values were lower than at 1-day post-bleaching; the mean value of ΔE between 1-day post-bleaching and 10 months post-bleaching was 2.46 (±3.1). The results of the study suggest that the effectiveness of professional tooth whitening is not appreciably affected by the application of the four sealants tested.


Subject(s)
Dental Enamel/drug effects , Pit and Fissure Sealants/pharmacology , Tooth Bleaching/methods , Color , Composite Resins , Hydrogen Peroxide , In Vitro Techniques , Iridescence , Methacrylates , Resin Cements , Silicates
7.
Hum Mov Sci ; 43: 125-37, 2015 Oct.
Article in English | MEDLINE | ID: mdl-26282375

ABSTRACT

Several studies have confirmed the neuromuscular effects of jaw motor activity on the postural stability of humans, but the mechanisms of functional coupling of the craniomandibular system (CMS) with human posture are not yet fully understood. The purpose of our study was, therefore, to investigate whether submaximum biting affects the kinematics of the ankle, knee, and hip joints and the electromyographic (EMG) activity of the leg muscles during bipedal narrow stance and single-leg stance. Twelve healthy young subjects performed force-controlled biting (FB) and non-biting (NB) during bipedal narrow stance and single-leg stance. To investigate the effects of FB on the angles of the hip, knee, and ankle joints, a 3D motion-capture system (Vicon MX) was used. EMG activity was recorded to enable analysis of the coefficient of variation of the muscle co-contraction ratios (CVR) of six pairs of postural muscles. Between FB and NB, no significant differences were found for the mean values of the angles of the ankle, knee, and hip joints, but the standard deviations were significantly reduced during FB. The values of the ranges of motion and the mean angular velocities for the three joints studied revealed significant reduction during FB also. CVR was also significantly reduced during FB for five of the six muscle pairs studied. Although submaximum biting does not change the basic strategy of posture control, it affects neuromuscular co-contraction patterns, resulting in increased kinematic precision.


Subject(s)
Biomechanical Phenomena/physiology , Bite Force , Electromyography , Postural Balance/physiology , Female , Humans , Knee Joint/physiology , Male , Muscle Contraction , Muscle, Skeletal/physiology , Neuromuscular Junction/physiology , Range of Motion, Articular/physiology , Young Adult
8.
Community Dent Health ; 31(1): 27-31, 2014 Mar.
Article in English | MEDLINE | ID: mdl-24741890

ABSTRACT

UNLABELLED: Older people with dementia are very dependent on nursing, and caregivers are frequently confronted with oral-care-resistant behaviour which may lead to shortcomings in oral health. OBJECTIVE: To compare oral hygiene and health status of institutionalised older people suffering, or not, from dementia. BASIC RESEARCH DESIGN: Prospective cohort study (single-blind). CLINICAL SETTING: Institutionalised older population in south-west Germany. PARTICIPANTS: Ninety-three, allocated to two groups: dementia (n = 57) and non-dementia (n = 36) based on a mini mental state examination. MAIN OUTCOME MEASURES: Target variables were plaque control record (PCR), gingival bleeding index (GBI), community periodontal index of treatment needs (CPITN), and denture hygiene index (DHI). Differences between the dementia and non-dementia groups were evaluated by univariate testing of all target variables. RESULTS: Univariate analysis revealed the amount of plaque in the dementia group was significantly higher than in the non-dementia group (p = 0.004). Mean CPITN of participants in the dementia group was significantly worse than those of participants in the non-dementia group (p < 0.001). All participants in the dementia group had periodontitis in at least one of the sextants, compared with 74% in the non-dementia group (p < 0.001). For DHI (p = 0.198) and GBI (p = 0.275) no differences were found between the groups. CONCLUSIONS: Some aspects of oral hygiene and health seem to be worse for the institutionalised older people with dementia. Permanent specially adapted intervention for residents suffering from dementia in long-term care homes, and training for caregivers, is desirable to maintain life-long oral hygiene and health.


Subject(s)
Dementia/epidemiology , Oral Health/statistics & numerical data , Oral Hygiene/statistics & numerical data , Aged , Aged, 80 and over , Cohort Studies , DMF Index , Dental Caries/epidemiology , Dental Plaque Index , Dentures/statistics & numerical data , Female , Germany/epidemiology , Humans , Institutionalization/statistics & numerical data , Long-Term Care/statistics & numerical data , Male , Middle Aged , Oral Hygiene Index , Periodontal Index , Periodontitis/epidemiology , Prospective Studies , Single-Blind Method
9.
J Oral Rehabil ; 41(4): 314-22, 2014 Apr.
Article in English | MEDLINE | ID: mdl-24447258

ABSTRACT

The purpose of this study was to evaluate enamel wear caused by monolithic zirconia crowns and to compare this with enamel wear caused by contralateral natural antagonists. Twenty monolithic zirconia crowns were placed in 20 patients requiring full molar crowns. For measurement of wear, impressions of both jaws were made at baseline after crown cementation and at 6-month follow-up. Mean and maximum wear of the occlusal contact areas of the crowns, of their natural antagonists and of the two contralateral natural antagonists were measured by the use of plaster replicas and 3D laser scanning methods. Wear differences were investigated by the use of two-sided paired Student's t-tests and by linear regression analysis. Mean vertical loss (maximum vertical loss in parentheses) was 10 (43) µm for the zirconia crowns, 33 (112) µm for the opposing enamel, 10 (58) µm for the contralateral teeth and 10 (46) µm for the contralateral antagonists. Both mean and maximum enamel wear were significantly different between the antagonists of the zirconia crowns and the contralateral antagonists. Gender and activity of the masseter muscle at night (bruxism) were identified as possible confounders which significantly affected wear. Under clinical conditions, monolithic zirconia crowns seem to be associated with more wear of opposed enamel than are natural teeth. With regard to wear behaviour, clinical application of monolithic zirconia crowns is justifiable because the amount of antagonistic enamel wear after 6 months is comparable with, or even lower than, that caused by other ceramic materials in previous studies.


Subject(s)
Crowns/adverse effects , Dental Materials/adverse effects , Dental Restoration Wear , Tooth Wear , Zirconium/adverse effects , Adult , Aged , Dental Enamel , Electromyography , Female , Follow-Up Studies , Humans , Male , Masseter Muscle/physiology , Middle Aged , Molar , Treatment Outcome , Young Adult
10.
Arch Oral Biol ; 58(12): 1751-60, 2013 Dec.
Article in English | MEDLINE | ID: mdl-24200301

ABSTRACT

OBJECTIVE: The purpose of this study was to test the hypothesis that jaw clenching induces co-contraction and low-level long-lasting tonic activation (LLTA) of neck muscles in the supine position. DESIGN: Ten healthy subjects developed various feedback-controlled submaximum bite forces in different bite-force directions in supine position. The electromyographic (EMG) activity of the semispinalis capitis, semispinalis cervicis, multifidi, splenius capitis, levator scapulae, trapezius, sternocleidomastoideus, masseter and infra/supra-hyoidal muscles was recorded. For normalization of EMG data, maximum-effort tasks of the neck muscles were performed. RESULTS: Co-contractions of the posterior neck muscles varied between 2% and 11% of their maximum voluntary contraction. Different bite forces and bite-force directions resulted in significant (p<.05) activity differences between the co-contraction levels of the neck muscles. In addition, LLTA of specific neck muscles, provoked by the jaw clenching tasks, was observed. CONCLUSIONS: This study demonstrated for the first time moderate co-contractions of jaw and neck muscles in the supine position under controlled submaximum jaw clenching forces. LLTA of most neck muscles was observed, outlasting clenching episodes and indicating an additional neuromuscular interaction between the two muscle groups.


Subject(s)
Bite Force , Bruxism/physiopathology , Jaw/physiology , Masseter Muscle/physiology , Muscle Contraction/physiology , Neck Muscles/physiology , Electromyography/methods , Female , Humans , Magnetic Resonance Imaging , Male , Supine Position , Young Adult
11.
Clin Oral Investig ; 17(1): 259-67, 2013 Jan.
Article in English | MEDLINE | ID: mdl-22302454

ABSTRACT

OBJECTIVES: A key aspect of complex restorative therapy is reconstruction of a new three-dimensional jaw relation. The objective of this study was to test the hypotheses that the initially recorded jaw relation would deviate substantially from the jaw position of the prosthetic reconstruction and that activity ratios of the jaw muscles would be significantly different for each of these jaw positions. MATERIALS AND METHODS: In 41 healthy subjects, 41 examiners incorporated intraoral occlusal devices fabricated with all the technical details and procedures commonly used during prosthetic reconstructions. The jaw positions in centric relation with the incorporated occlusal devices were telemetrically measured in the condylar, first molar and incisal regions, relative to intercuspation. Electromyographic (EMG) activity of the temporalis and masseter muscles was recorded, and activity ratios were calculated for homonymous and heteronymous muscles. RESULTS: The recorded jaw relation differed significantly (p < 0.001) from the jaw position reconstructed with the intraoral occlusal devices. The initially recorded jaw relation was reproduced with the intraoral occlusal device with spatial accuracy of approximately 0.3 mm in the condylar, molar and incisal regions. The EMG ratios between centric relations and the reconstructed positions were significantly different (p < 0.05) for the temporal muscle and the temporalis/masseter ratio. CONCLUSIONS: The findings revealed that three-dimensional jaw-relation recording may be reproduced in a simulated prosthetic reconstruction within the accuracy reported for replicate intraoral bite recordings. CLINICAL RELEVANCE: Centric relation recordings may be reproduced in a prosthetic reconstruction with the spatial accuracy of 0.3 mm.


Subject(s)
Dental Prosthesis Design , Jaw Relation Record/methods , Acrylic Resins/chemistry , Centric Relation , Dental Articulators , Dental Impression Materials/chemistry , Dental Occlusion, Centric , Electromyography , Female , Humans , Imaging, Three-Dimensional/methods , Incisor/anatomy & histology , Jaw Relation Record/instrumentation , Male , Mandible/anatomy & histology , Mandibular Condyle/anatomy & histology , Masseter Muscle/physiology , Methylmethacrylates/chemistry , Models, Dental , Molar/anatomy & histology , Muscle Contraction/physiology , Telemetry/instrumentation , Temporal Muscle/physiology , User-Computer Interface , Young Adult
12.
J Oral Rehabil ; 39(7): 552-7, 2012 Jul.
Article in English | MEDLINE | ID: mdl-22574689

ABSTRACT

The purpose of this prospective cohort study was to assess the performance of tooth-supported, long-span, zirconia fixed dental prostheses (FDPs). Thirty FDPs with span lengths from 36 to 46 mm (mean 40·33 mm), with 4-7 units and with connector dimensions ∼9 mm(2) were inserted (19 in the posterior region, 11 including anterior teeth) using glass-ionomer cement. The performance of the FDPs was assessed (aesthetic evaluation, failures, hypersensitivity/tooth vitality, secondary caries, pocket depth, decementation, and chipping) at baseline and after 5 years. Cox regression analysis was performed to identify risk factors. There were 16 failures after 5 years. Framework fracture occurred for two FDPs, four FDPs had to be re-cemented, one abutment tooth had to be treated endodontically, one abutment tooth fractured and cohesive failure of the veneer occurred for eight. Four FDPs had to be replaced, so survival was 82%. The aesthetics were rated as excellent by the patients at baseline and good at the 5-year recall. Cox regression analysis showed that both length [P = 0·05, exp(B) = 1·22] and location [P = 0·019, exp(B) = 4·09] of the FDP were risk factors for failure. Compared with the previously published 2-year results, the incidence of complications increased dramatically. Additionally, it was shown that long-span FDPs in the molar region are at greater risk of failure than FDPs in the anterior region.


Subject(s)
Dental Materials/standards , Dental Prosthesis Design/standards , Dental Restoration Failure/statistics & numerical data , Denture, Partial, Fixed/standards , Zirconium/standards , Adult , Cementation/methods , Female , Follow-Up Studies , Glass Ionomer Cements , Humans , Male , Middle Aged , Patient Satisfaction , Prospective Studies , Risk Factors , Treatment Outcome
13.
J Oral Rehabil ; 39(5): 338-48, 2012 May.
Article in English | MEDLINE | ID: mdl-22220913

ABSTRACT

Aim of this study was to introduce a feasible and valid technique for the assessment of masticatory performance that is comparable to the standard sieving method. Twenty-one chewing samples (Optosil) comminuted by healthy dentate adults were analysed with a sieving and scanning method. Scanning was performed using a conventional flatbed scanner (1200dpi). All scanned images underwent image analysis (ImageJ), which yielded descriptive parameters such as area, best-fitting ellipse for each particle. Of the 2D-image, a volume was estimated for each particle, which was converted into a weight. To receive a discrete distribution of particle sizes comparable to sieving, five chewing samples were used to calculate a size-dependent area-volume-conversion factor. The sieving procedure was carried out with a stack of 10 sieves, and the retained particles per sieve were weighed. The cumulated weights yielded by either method were curve-fitted with the Rosin-Rammler distribution to determine the median particle size x(50) . The Rosin-Rammler distributions for sieving and scanning resemble each other. The distributions show a high correlation (0·919-1·0, n= 21, P<0·01, Pearson's correlation coefficient). The median particle sizes vary between 3·83 and 4·77mm (mean: 4·31) for scanning and 3·53 and 4·55mm (mean: 4·21) for sieving. On average, scanning overestimates the x(50) values by 2·4%. A modified Bland-Altman plot reveals that 95% of the x(50) values fall within 10% of the average x(50) . The scanning method is a valid, simple and feasible method to determine masticatory performance.


Subject(s)
Mastication/physiology , Particle Size , Adult , Feasibility Studies , Female , Humans , Image Processing, Computer-Assisted , Male , Optics and Photonics , Reproducibility of Results , Silicones , Young Adult
14.
J Oral Rehabil ; 37(11): 860-5, 2010 Nov.
Article in English | MEDLINE | ID: mdl-20633072

ABSTRACT

Visual tooth colour assessment by use of the Vita 3D-Master(®) (3D; Vita Zahnfabrik, Bad Säckingen, Germany) is well documented. To improve handling, a new linear arrangement of the shade tabs has been introduced (LG; Linearguide 3D-Master(®) ). The purpose of this study was to investigate whether the linear design has an effect on shade matching. Fifty-six students underwent identical, theoretical and practical training, by use of an Internet learning module [Toothguide Training Software(®) (TT)] and a standardised training programme [Toothguide Training Box(®) (TTB)]. Each student then matched 30 randomly chosen shade tabs presented in an intra-oral setting by a standardised device [Toothguide Check Box(®) (TCB)]; 15 matches were made using the 3D and 15 using the LG shade guide system, under a daylight lamp (840 matches for each guide). It was recorded to what extent the presented and selected shade tabs, or the lightness group of the tabs, matched, also the needed time for colour matching. The results showed that 35% of perfect matches were observed for the 3D and 32% for the LG. The lightness group was correct in 59% of cases for 3D and 56% for LG. Mean time needed for matching of tabs and lightness group was no different between groups (no significant difference for any assessment). Within the limitations of the study design, the colour assessment with regard to performance and time needed in shade matching was not different with the LG or the 3D. Therefore, the user should choose which shade tab arrangement is more applicable.


Subject(s)
Color Perception , Color/standards , Dental Prosthesis Design/instrumentation , Prosthesis Coloring/instrumentation , Tooth/anatomy & histology , Adult , Female , Humans , Male , Regression Analysis , Software
15.
Int Endod J ; 43(5): 436-42, 2010 May.
Article in English | MEDLINE | ID: mdl-20518938

ABSTRACT

OBJECTIVE: The hypothesis of this study was that the fracture load of incisor teeth restored using short, threaded, parallel-sided posts (TMP) is, under special conditions, not inferior to that of teeth restored using long TMPs or fibre-reinforced posts (FRP). METHODOLOGY: Seventy-two maxillary incisors and 72 mandibular incisors were collected. Sixty-four in each group were root filled; in half of these FRPs were cemented, and in the other half TMPs were used. Half of the FRPs were pretreated; the others were not pretreated. In the TMP-group, half of the teeth received a long post (10 mm), the other half a short post (3 mm). Crowns were fabricated and cemented with Ketac-cem or Panavia. Eight maxillary incisors and eight mandibular incisors with intact natural crowns were used as control groups. All specimens were loaded until fracture. RESULTS: Fracture loads were higher for pretreated FRPs than for untreated FRPs. If the FRPs were not pretreated, fracture loads for maxillary incisors after use of short metal posts were significantly higher (248 N compared with 133 N, P = 0.027). Fracture loads for teeth restored using long TMPs were not higher than for teeth restored using short TMPs (277 N compared with 266 N). Fracture loads for mandibular incisors restored using long (10 mm) pretreated FRP were higher than for mandibular incisors restored using short (3 mm) metal posts (436 N compared with 285 N). Cementation of the crowns using an adhesive resin cement did not increase the fracture load for mandibular incisors, whereas for maxillary incisors, this cementation technique tended to increase fracture loads in teeth restored with FRP, although this increase was not significant at the P < 0.05 level (P = 0.06). In both groups, fracture loads were higher for mandibular incisors. CONCLUSIONS: Short, threaded, parallel-sided metal posts might be an alternative to fibre- reinforced posts for maxillary incisors, for teeth with short roots or when FRP cannot be pretreated.


Subject(s)
Cementation/methods , Composite Resins/chemistry , Dental Alloys/chemistry , Dental Materials/chemistry , Dental Prosthesis Design , Incisor/physiopathology , Post and Core Technique/instrumentation , Tooth Fractures/physiopathology , Tooth Preparation, Prosthodontic/methods , Coated Materials, Biocompatible/chemistry , Crowns , Dental Bonding , Dental Cements/chemistry , Dental Stress Analysis , Glass Ionomer Cements/chemistry , Humans , Magnesium Oxide/chemistry , Mandible , Materials Testing , Maxilla , Methacrylates/chemistry , Polycarboxylate Cement/chemistry , Resin Cements/chemistry , Root Canal Therapy , Stress, Mechanical , Surface Properties , Zinc Oxide/chemistry , Zinc Phosphate Cement/chemistry
16.
Dentomaxillofac Radiol ; 39(4): 231-4, 2010 May.
Article in English | MEDLINE | ID: mdl-20395464

ABSTRACT

OBJECTIVES: The aim was to assess the prevalence of osteoarthrosis (OA) in the temporomandibular joint (TMJ) in a sample of older people by use of contrast agent-enhanced MRI. METHODS: 30 patients (73-75 years old) were drawn from a representative sample and were examined clinically. The shape of the condyle was assessed using gadolinium-enhanced MR images, which were evaluated by two independent raters. Statistical assessment was performed by using descriptive statistics, the chi(2) test and kappa statistics. RESULTS: Agreement between raters was excellent with respect to the presence/absence of OA (kappa = 0.8). Only one subject reported pain in a TMJ. Fine and/or coarse crepitus was not heard in any subject. MRI showed that 70% displayed signs of OA in at least one TMJ. There were no gender-related differences in the prevalence of OA (P > 0.05). CONCLUSION: Gadolinium-enhanced MRI showed that OA of the TMJ is common in older people (70%), although the prevalence of clinical signs of OA is very low.


Subject(s)
Osteoarthritis/diagnosis , Temporomandibular Joint Disorders/diagnosis , Aged , Cohort Studies , Contrast Media , Facial Pain/diagnosis , Female , Gadolinium DTPA , Germany , Humans , Image Enhancement/methods , Joint Dislocations/diagnosis , Longitudinal Studies , Magnetic Resonance Imaging/methods , Male , Mandibular Condyle/pathology , Osteoarthritis/diagnostic imaging , Prospective Studies , Range of Motion, Articular/physiology , Temporomandibular Joint Disc/pathology , Temporomandibular Joint Disorders/diagnostic imaging , Tomography, X-Ray/methods
17.
Acta Biomater ; 6(9): 3747-54, 2010 Sep.
Article in English | MEDLINE | ID: mdl-20227533

ABSTRACT

In dentistry the restoration of decayed teeth is challenging and makes great demands on both the dentist and the materials. Hence, fiber-reinforced posts have been introduced. The effects of different variables on the ultimate load on teeth restored using fiber-reinforced posts is controversial, maybe because the results are mostly based on non-standardized in vitro tests and, therefore, give inhomogeneous results. This study combines the advantages of in vitro tests and finite element analysis (FEA) to clarify the effects of ferrule height, post length and cementation technique used for restoration. Sixty-four single rooted premolars were decoronated (ferrule height 1 or 2 mm), endodontically treated and restored using fiber posts (length 2 or 7 mm), composite fillings and metal crowns (resin bonded or cemented). After thermocycling and chewing simulation the samples were loaded until fracture, recording first damage events. Using UNIANOVA to analyze recorded fracture loads, ferrule height and cementation technique were found to be significant, i.e. increased ferrule height and resin bonding of the crown resulted in higher fracture loads. Post length had no significant effect. All conventionally cemented crowns with a 1-mm ferrule height failed during artificial ageing, in contrast to resin-bonded crowns (75% survival rate). FEA confirmed these results and provided information about stress and force distribution within the restoration. Based on the findings of in vitro tests and computations we concluded that crowns, especially those with a small ferrule height, should be resin bonded. Finally, centrally positioned fiber-reinforced posts did not contribute to load transfer as long as the bond between the tooth and composite core was intact.


Subject(s)
Dental Implants , Dental Restoration, Permanent/methods , Dental Stress Analysis/methods , Finite Element Analysis , Materials Testing , Tooth Fractures/pathology , Biomechanical Phenomena , Computer Simulation , Humans , Mastication
18.
Community Dent Health ; 27(4): 242-7, 2010 Dec.
Article in English | MEDLINE | ID: mdl-21473361

ABSTRACT

OBJECTIVE: To obtain information about the subjective oral health status of non-clinical elderly populations of urban regions of Germany, one in the East and one in the West, by using OHIP-14 and, for first time, the GOHAI, and, furthermore, to compare the results obtained by use of both instruments. BASIC RESEARCH DESIGN: Cross-sectional. CLINICAL SETTING: Randomly chosen, non-clinical elderly population in urban regions of Germany. PARTICIPANTS: 197 participants (51% male) born in the years 1930-1932. MAIN OUTCOME MEASURES: GOHAI, OHIP-14. RESULTS: Median GOHAI score was 54; median OHIP-14 score was 2. Scores indicative of severely impaired oral health were rare. The effect of living in eastern or western Germany was of minor significance. Although the internal consistency of both measures was comparable and the same positive association with psychological wellbeing, absence of dry mouth, burning mouth, and removable dentures (p < 0.05) was observed, differences occurred. In simultaneous analysis of all items, factor analysis revealed only partial overlap of the items in extracted factors. Furthermore, the extreme score indicating no impairment was five times more frequent for OHIP-14. Of those who scored zero in OHIP-14, only 20% had the GOHAI equivalent score of 60, and for some GOHAI items the answer category for highest impairment was obtained. CONCLUSIONS: GOHAI scores for this randomly chosen non-clinical group enable comparison with scores for Germany measured in the future. The differences between GOHAI and OHIP-14 make it necessary to select the most appropriate instrument for a planned purpose and study population.


Subject(s)
Oral Health , Quality of Life , Sickness Impact Profile , Aged , Aged, 80 and over , Burning Mouth Syndrome/epidemiology , Burning Mouth Syndrome/psychology , Cross-Sectional Studies , Denture, Partial, Removable/psychology , Denture, Partial, Removable/statistics & numerical data , Female , Geriatric Assessment , Germany/epidemiology , Humans , Male , Multivariate Analysis , Reproducibility of Results , Residence Characteristics , Sampling Studies , Self Report , Urban Population , Xerostomia/epidemiology , Xerostomia/psychology
19.
J Oral Rehabil ; 36(11): 848-55, 2009 Nov.
Article in English | MEDLINE | ID: mdl-19793231

ABSTRACT

The aim of this investigation was to determine colour compatibility between dental shade guides, namely, VITA Classical (VC) and VITA 3D-Master (3D), and human teeth in quinquagenarians and septuagenarians. Tooth colour, described in terms of L*a*b* values of the middle third of facial tooth surface of 1391 teeth, was measured using VITA Easyshade in 195 subjects (48% female). These were compared with the colours (L*a*b* values) of the shade tabs of VC and 3D. The mean coverage error and the percentage of tooth colours being within a given colour difference (DeltaE(ab)) from the tabs of VC and 3D were calculated. For comparison, hypothetical, optimized, population-specific shade guides were additionally calculated based on discrete optimization techniques for optimizing coverage. Mean coverage error was DeltaE(ab) = 3.51 for VC and DeltaE(ab) = 2.96 for 3D. Coverage of tooth colours by the tabs of VC and 3D within DeltaE(ab) = 2 was 23% and 24%, respectively, (DeltaE(ab)

Subject(s)
Dental Prosthesis Design/instrumentation , Prosthesis Coloring/instrumentation , Aged , Algorithms , Color , Esthetics, Dental , Female , Humans , Male , Middle Aged , Reference Standards , Spectrophotometry , Tooth/anatomy & histology
20.
J Oral Rehabil ; 36(8): 610-5, 2009 Aug.
Article in English | MEDLINE | ID: mdl-19496928

ABSTRACT

The purpose of this prospective cohort study was to assess the performance of tooth-supported, extended zirconia, fixed dental prostheses (FDPs). Thirty FDPs with span-lengths between 36 and 46 mm (mean: 40.33 mm), four to seven units and with connector dimensions of approximately 9 mm(2) were inserted (19 in the posterior region, 11 including anterior teeth) using glass-ionomer cement and assessed (aesthetic evaluation, failures, hypersensitivity/tooth vitality, secondary caries, pocket depth, decementation and chipping) at baseline and after 2 years. Differences between baseline and 2-year recall were analysed using the Wilcoxon signed-rank test for matched pairs. There were five failures. One FDP revealed a core fracture at the base of the connector, probably caused by a damage induced during fabrication. Two FDPs had to be recemented, one abutment tooth had to be treated endodontically and one cohesive failure of the veneer was observed. There were no significant changes of pocket depth and hypersensitivity between baseline and 2-year recall. The aesthetics were rated as excellent by the patients at both baseline and recall. Two year clinical results of extended zirconia based FDPs with 9 mm(2) connectors are promising.


Subject(s)
Dental Prosthesis/standards , Denture, Partial, Fixed/standards , Zirconium , Cohort Studies , Dental Abutments , Equipment Failure Analysis , Female , Humans , Male , Middle Aged , Treatment Outcome
SELECTION OF CITATIONS
SEARCH DETAIL
...