Highly Specific Detection of Oxytocin in Saliva.

Oxytocin is a peptide neurophysin hormone made up of nine amino acids and is used in induction of one in four births worldwide (more than 13 percent in the United States). Herein, we have developed an antibody alternative aptamer-based electrochemical assay for real-time and point-of-care detection of oxytocin in non-invasive saliva samples. This assay approach is rapid, highly sensitive, specific, and cost-effective. Our aptamer-based electrochemical assay can detect as little as 1 pg/mL of oxytocin in less than 2 min in commercially available pooled saliva samples. Additionally, we did not observe any false positive or false negative signals. This electrochemical assay has the potential to be utilized as a point-of-care monitor for rapid and real-time oxytocin detection in various biological samples such as saliva, blood, and hair extracts.

A novel biosensor for ultrasensitive detection of fungal genes.

Fungal infections are a rapidly increasing public health problem due to their high morbidity and mortality rates, especially in populations with compromised immune systems. Rapid and accurate diagnosis of these diseases is, therefore, necessary to improve the prognosis of afflicted patients. Unfortunately, current clinical chemistry practice relies on lengthy culturing methods that are insufficient to meet the fast turnaround requirements. Here we present a cost-effective and robust nucleic acid sensor that can identify the presence of histoplasmosis causing fungal genes, in whole blood or bronchoalveolar lavage (BAL) samples, far earlier than current methods. Our novel assay involves the hybridization of target gene sequences with immobilized nucleic acid probes, allowing direct, label-free detection of Hcp100, CBP1, and M antigen genes through electrochemical analysis. The resultant current is attributed to the presence of fungal targets in the sample solution. The assay provides ultra-sensitive detection of DNA molecules with a limit of detection (LOD) values down to 100 aM, sufficient to meet the clinical diagnostic need. In addition, the turnaround time for the sample to result is less than 90 min compared to the current clinical procedure's turnaround time of 3-4 weeks.

Rapid, Multianalyte Detection of Opioid Metabolites in Wastewater.

By monitoring opioid metabolites, wastewater-based epidemiology (WBE) could be an excellent tool for real-time information on the consumption of illicit drugs. A key limitation of WBE is the reliance on costly laboratory-based techniques that require substantial infrastructure and trained personnel, resulting in long turnaround times. Here, we present an aptamer-based graphene field effect transistor (AptG-FET) platform for simultaneous detection of three different opioid metabolites. This platform provides a reliable, rapid, and inexpensive method for quantitative analysis of opioid metabolites in wastewater. The platform delivers a limit of detection 2-3 orders of magnitude lower than previous reports, but in line with the concentration range (pg/mL to ng/mL) of these opioid metabolites present in real samples. To enable multianalyte detection, we developed a facile, reproducible, and high-yield fabrication process producing 20 G-FETs with integrated side gate platinum (Pt) electrodes on a single chip. Our devices achieved the selective multianalyte detection of three different metabolites: noroxycodone (NX), 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP), and norfentanyl (NF) in wastewater diluted 20× in buffer.

Chemical and Biological Sensing Using Hybridization Chain Reaction.

Since the advent of its theoretical discovery more than 30 years ago, DNA nanotechnology has been used in a plethora of diverse applications in both the fundamental and applied sciences. The recent prominence of DNA-based technologies in the scientific community is largely due to the programmable features stored in its nucleobase composition and sequence, which allow it to assemble into highly advanced structures. DNA nanoassemblies are also highly controllable due to the precision of natural and artificial base-pairing, which can be manipulated by pH, temperature, metal ions, and solvent types. This programmability and molecular-level control have allowed scientists to create and utilize DNA nanostructures in one, two, and three dimensions (1D, 2D, and 3D). Initially, these 2D and 3D DNA lattices and shapes attracted a broad scientific audience because they are fundamentally captivating and structurally elegant; however, transforming these conceptual architectural blueprints into functional materials is essential for further advancements in the DNA nanotechnology field. Herein, the chemical and biological sensing applications of a 1D DNA self-assembly process known as hybridization chain reaction (HCR) are reviewed. HCR is a one-dimensional (1D) double stranded (ds) DNA assembly process initiated only in the presence of a specific short ssDNA (initiator) and two kinetically trapped DNA hairpin structures. HCR is considered an enzyme-free isothermal amplification process, which shows substantial promise and offers a wide range of applications for in situ chemical and biological sensing. Due to its modular nature, HCR can be programmed to activate only in the presence of highly specific biological and/or chemical stimuli. HCR can also be combined with different types of molecular reporters and detection approaches for various analytical readouts. While the long dsDNA HCR product may not be as structurally attractive as the 2D and 3D DNA networks, HCR is highly instrumental for applied biological, chemical, and environmental sciences, and has therefore been studied to foster a variety of objectives. In this review, we have focused on nucleic acid, protein, metabolite, and heavy metal ion detection using this 1D DNA nanotechnology via fluorescence, electrochemical, and nanoparticle-based methodologies.

Universal sensor array for highly selective system identification using two-dimensional nanoparticles.

A typical lock-and-key sensing strategy, relying only on the most dominant interactions between the probe and target, could be too limiting. In reality, the information received upon sensing is much richer. Non-specific events due to various intermolecular forces contribute to the overall received information with different degrees, and when analyzed, could provide a much more powerful detection opportunity. Here, we have assembled a highly selective universal sensor array using water-soluble two-dimensional nanoparticles (nGO, MoS2 and WS2) and fluorescent DNA molecules. The array is composed of 12 fluorescently silent non-specific nanoreceptors (2D-nps) and used for the identification of three radically different systems; five proteins, three types of live breast cancer cells and a structure-switching event of a macromolecule. The data matrices for each system were processed using Partial Least Squares (PLS) discriminant analysis. In all of the systems, the sensor array was able to identify each object or event as separate clusters with 95% confidence and without any overlap. Out of 15 unknown entities with unknown protein concentrations tested, 14 of them were predicted successfully with correct concentration. 8 breast cancer cell samples out of 9 unknown entities from three cell types were predicted correctly. During the assembly of each nanoprobe, the intrinsic non-covalent interactions between unmodified 2D nanoparticles and ssDNAs were exploited. The unmodified 2D materials offer remarkable simplicity in the layout and the use of ssDNAs as probes provides limitless possibilities because the natural interaction of a ssDNA and 2D surface can be fine-tuned with the nucleobase composition, oligonucleotide length and type of 2D nanomaterial. Therefore, the approach described here can be advanced and fine-tuned indefinitely for meeting a particular sensing criterion. Though we have only studied three distinct elements, this approach is universal enough to be applied to a wide-range of systems.

Low picomolar, instrument-free visual detection of mercury and silver ions using low-cost programmable nanoprobes.

The EPA's recommended maximum allowable level of inorganic mercury in drinking water is 2 ppb (10 nM). To our knowledge, the most sensitive colorimetric mercury sensor reported to date has a limit of detection (LOD) of 800 pM. Here, we report an instrument-free and highly practical colorimetric methodology, which enables detection of as low as 2 ppt (10 pM) of mercury and/or silver ions with the naked eye using a gold nanoprobe. Synthesis of the nanoprobe costs less than $1.42, which is enough to perform 200 tests in a microplate; less than a penny for each test. We have demonstrated the detection of inorganic mercury from water, soil and urine samples. The assay takes about four hours and the color change is observed within minutes after the addition of the last required element of the assay. The nanoprobe is highly programmable which allows for the detection of mercury and/or silver ions separately or simultaneously by changing only a single parameter of the assay. This highly sensitive approach for the visual detection relies on the combination of the signal amplification features of the hybridization chain reaction with the plasmonic properties of the gold nanoparticles. Considering that heavy metal ion contamination of natural resources is a major challenge and routine environmental monitoring is needed, yet time-consuming, this colorimetric approach may be instrumental for on-site heavy metal ion detection. Since the color transition can be measured in a variety of formats including using the naked eye, a simple UV-Vis spectrophotometer, or recording using mobile phone apps for future directions, our cost-efficient assay and method have the potential to be translated into the field.

Rapid Visual Screening and Programmable Subtype Classification of Ebola Virus Biomarkers.

The massive outbreaks of the highly transmissible and lethal Ebola virus disease were caused by infection with one of the Ebolavirus species. It is vital to develop cost-effective, highly sensitive and selective multitarget biosensing platforms that allow for both the detection and phenotyping. Here, a highly programmable, cost-efficient and multianalyte sensing approach is reported that enables visual detection and differentiation of conserved oligonucleotide regions of all Ebolavirus subtypes known to infect human primates. This approach enables the detection of as little as 400 amols (24 × 106 molecules) of target sequences with the naked eye. Furthermore, the detection assay can be used to classify four virus biomarkers using a single nanoprobe template. This can be achieved by using different combinations of short single stranded initiator molecules, referred to as programming units, which also enable the simultaneous and rapid identification of the four biomarkers in 16 different combinations. The results of 16 × 5 array studies illustrate that the system is extremely selective with no false-positive or false-negative. Finally, the target strands in liquid biopsy mimics prepared from urine specimens are also able to be identified and classified.

Unlocked Nucleic Acids for miRNA detection using two dimensional nano-graphene oxide.

In this study we have used Unlocked Nucleic Acids (UNAs) to discriminate a breast cancer oncomiR from two other miRNAs in the same RNA family using two-dimensional graphene oxide nanoassemblies. Fluorescently labeled single stranded probe strands and graphene oxide nanoassemblies have been used to detect miR-10b and discriminate it from miR-10a, which differs by only a single nucleotide (12th base from the 5' end), and miR-10c, which differs by only two nucleotides (12th and 16th bases from the 5' end). We have determined the discrimination efficacy and detection capacity of a DNA probe with two inserted UNA monomers (UNA2), and compared it to the DNA probe with two purposefully inserted mutations (DNAM2) and full complementary sequence (DNAfull). We have observed that UNA2 is 50 times more powerful than DNAfull in discriminating miR-10b from miR-10c while generating an equally high fluorescence signal. This fluorescence signal was then further enhanced with the use of the highly specific endonuclease dsDNase for an enzymatic amplification step. The results demonstrate that the underutilized UNAs have enormous potential for miRNA detection and offer remarkable discrimination efficacy over single and double mismatches.

Reprogrammable multiplexed detection of circulating oncomiRs using hybridization chain reaction.

In this study, we have coupled the DNA polymerization capability of hybridization chain reaction (HCR) with the plasmonic properties of gold nanoparticles to develop a reprogrammable and multiplexed detection of three circulating oncomiRs (miR-10b, miR-21 and miR-141) dysregulated in various disease states of breast cancer. We have demonstrated that by simply changing the initiator (label-free short single stranded DNA) content of the HCR, while keeping everything else unchanged, the same nanoparticle assembly can be reprogrammed for the detection of the target oncomiRs individually or simultaneously in all possible combinations. We have shown that as little as 20 femtomoles of each oncomiR can be detected visually without using any analytical instrument. Furthermore, we demonstrated that the target oncomiR can be detected in an RNA pool isolated from a liquid biopsy mimic of breast cancer.

Multiplexed Activity of perAuxidase: DNA-Capped AuNPs Act as Adjustable Peroxidase.

In this study, we have investigated the intrinsic peroxidase-like activity of citrate-capped AuNPs (perAuxidase) and demonstrated that the nanozyme function can be multiplexed and tuned by integrating oligonucleotides on a nanoparticle surface. Systematic studies revealed that by controlling the reaction parameters, the mutiplexing effect can be delayed or advanced and further used for aptasensor applications.

Monitoring the multitask mechanism of DNase I activity using graphene nanoassemblies.

Here we have demonstrated that graphene serves as a remarkable platform for monitoring the multitask activity of an enzyme with fluorescence spectroscopy. Our studies showed that four different simultaneous enzymatic tasks of DNase I can be observed and measured in a high throughput fashion using graphene oxide and oligonucleotide nanoassemblies. We have used phosphorothioate modified oligonucleotides to pinpoint the individual and highly specific functions of DNase I with single stranded DNA, RNA, and DNA/DNA and DNA/RNA duplexes. DNase I resulted in fluorescence recovery in the nanoassemblies and enhanced the intensity tremendously in the presence of sequence specific DNA or RNA molecules with different degrees of amplification. Our study enabled us to discover the sources of this remarkable signal enhancement, which has been used for biomedical applications of graphene for sensitive detection of specific oncogenes. The significant difference in the signal amplification observed for the detection of DNA and RNA molecules is a result of the positive and/or reductive signal generating events with the enzyme. In the presence of DNA there are four possible ways that the fluorescence reading is influenced, with two of them resulting in a gain in signal while the other two result in a loss. Since the observed signal is a summation of all the events together, the absence of the two fluorescence reduction events with RNA gives a greater degree of fluorescence signal enhancement when compared to target DNA molecules. Overall, our study demonstrates that graphene has powerful features for determining the enzymatic functions of a protein and reveals some of the unknowns observed in the graphene and oligonucleotide assemblies with DNase I.

Simultaneous detection of circulating oncomiRs from body fluids for prostate cancer staging using nanographene oxide.

Circulating oncomiRs are highly stable diagnostic, prognostic, and therapeutic tumor biomarkers, which can reflect the status of the disease and response to cancer therapy. miR-141 is an oncomiR, which is overexpressed in advanced prostate cancer patients, whereas its expression is at the normal levels in the early stages of the disease. On the other hand, miR-21 is significantly elevated in the early stage, but not in the advanced prostate cancer. Here, we have demonstrated simultaneous detection of exogenous miR-21 and miR-141 from human body fluids including blood, urine and saliva using nanographene oxide. Our system enables us to specifically and reliably detect each oncomiR at different fluorescence emission channels from a large population of RNAs extracted from body fluids. We were also able to determine the content and the ratio of the miR-21 and miR-141 in 10 different miRNA cocktails composed of various, but unknown, concentrations of both oncomiRs. A strong agreement (around 90%) between the experimental results and the actual miRNA compositions was observed. Moreover, we have demonstrated that overexpressed miR-21 or miR-141 increases the fluorescence only at their signature wavelengths of 520 and 670 nm, respectively. The approach in this study combines two emerging fields of nanographene in biomedicine and the role of circulating miRNAs in cancer. Our strategy has the potential to address the current challenges in diagnosis, prognosis and staging of prostate cancer with a non- or minimally invasive approach.

DNA-length-dependent quenching of fluorescently labeled iron oxide nanoparticles with gold, graphene oxide and MoS2 nanostructures.

We controlled the fluorescence emission of a fluorescently labeled iron oxide nanoparticle using three different nanomaterials with ultraefficient quenching capabilities. The control over the fluorescence emission was investigated via spacing introduced by the surface-functionalized single-stranded DNA molecules. DNA molecules were conjugated on different templates, either on the surface of the fluorescently labeled iron oxide nanoparticles or gold and nanographene oxide. The efficiency of the quenching was determined and compared with various fluorescently labeled iron oxide nanoparticle and nanoquencher combinations using DNA molecules with three different lengths. We have found that the template for DNA conjugation plays significant role on quenching the fluorescence emission of the fluorescently labeled iron oxide nanoparticles. We have observed that the size of the DNA controls the quenching efficiency when conjugated only on the fluorescently labeled iron oxide nanoparticles by setting a spacer between the surfaces and resulting change in the hydrodynamic size. The quenching efficiency with 12mer, 23mer and 36mer oligonucleotides decreased to 56%, 54% and 53% with gold nanoparticles, 58%, 38% and 32% with nanographene oxide, 46%, 38% and 35% with MoS2, respectively. On the other hand, the presence, not the size, of the DNA molecules on the other surfaces quenched the fluorescence significantly with different degrees. To understand the effect of the mobility of the DNA molecules on the nanoparticle surface, DNA molecules were attached to the surface with two different approaches. Covalently immobilized oligonucleotides decreased the quenching efficiency of nanographene oxide and gold nanoparticles to ∼22% and ∼21%, respectively, whereas noncovalently adsorbed oligonucleotides decreased it to ∼25% and ∼55%, respectively. As a result, we have found that each nanoquencher has a powerful quenching capability against a fluorescent nanoparticle, which can be tuned with surface functionalized DNA molecules.

Nano-graphene oxide as a novel platform for monitoring the effect of LNA modification on nucleic acid interactions.

Graphene oxide has gained significant attention due to its exceptional physical properties at biological interfaces. It has extraordinary quenching, fast adsorption and desorption properties that are suitable for detection of molecular interactions in nucleic acids. Here we studied the interaction between locked nucleic acid (LNA) modified oligonucleotides and its complementary miR-10b DNA analog. We demonstrate that LNA modification does not alter the hybridization yield, despite a slight difference in the rate, however it does increase the duplex stability dramatically. The noncovalent nucleic acid-graphene oxide complex maintained the stability between 25 and 90 °C in the absence of oligonucleotide-induced desorption. The melting temperatures of duplexes with or without LNA base modification were determined due to remarkable fluorescence quenching and fast oligonucleotide adsorption with graphene oxide. The difference in melting temperatures was used to control the release of surface adsorbed nucleic acids at 70 °C. Finally, a mutation in the oligonucleotide sequence is detected by the complementary oligonucleotides on the graphene oxide surface. Due to its extraordinary physical properties, graphene oxide represents a remarkable platform for studying nucleic acid interactions and serves as a promising material for biomedical applications.

Doxorubicin loading on graphene oxide, iron oxide and gold nanoparticle hybrid.

We report the facile and non-covalent construction of a graphene oxide-based functional hybrid material with gold and fluorescently labeled superparamagnetic iron oxide nanoparticles [GO-MNcy5.5-AuNP]. The obtained [GO-MNcy5.5-AuNP] hybrid exhibits the physical properties of each component. The relaxivity of the magnetic nanoparticles was improved, cy5.5 fluorescence was completely quenched and the surface plasmon peak of the gold nanoparticles at 520 nm was observed in the hybrid complex. The hybrid exhibits an ultra-high doxorubicin loading capacity of 6.05 mg mg-1 at 0.32 mg ml-1 drug concentration. This material could serve as a promising platform for theranostics, due to its contrast agent composition and anticancer drug loading capacity.