Cutaneous pharmacokinetics-based bioequivalence: A clinical dermal open flow microperfusion verification study using lidocaine and prilocaine combination topical products.

BACKGROUND: Using accurate, sensitive, reproducible and efficient in vivo cutaneous pharmacokinetics (PK)-based bioequivalence (BE) approaches can promote the development of topical generic drug products. A clinical dermal open flow microperfusion (dOFM) study has previously demonstrated the BE of topical drug products containing a hydrophilic drug. However, the utility of dOFM to evaluate the topical BE of drug products containing moderately lipophilic drugs, more representative of most topical drugs, has not yet been established. OBJECTIVE: To evaluate the ability of a clinical dOFM study to assess BE of topical products containing two moderately lipophilic drugs that have only minor differences in chemical and physical properties. METHODS: The study included 20 healthy subjects. Four application sites on each thigh were treated with fixed dose lidocaine/prilocaine combination products, and dermal drug concentrations were monitored with two dOFM probes per application site for 12 h. A reference cream was compared to itself and to an approved generic cream (both serving as positive controls for BE), and to a gel (negative control). BE was established based on AUC0to12h and Cmax using the scaled-average-BE approach. Systemic exposure of both drugs was assessed throughout the study. RESULTS: BE was successfully demonstrated for the positive controls, and not for the negative control, for both drugs. The systemic exposure of both drugs was negligible. CONCLUSIONS: dOFM accurately demonstrated BE between bioequivalent topical creams, sensitively discriminated between different formulations and differentiated the cutaneous PK of both study drugs, even though they differ only slightly in chemical and physical properties. These results support the utility of dOFM as a cutaneous PK-based BE approach for topical lipophilic drugs, including lidocaine and prilocaine.

Determining topical product bioequivalence with stimulated Raman scattering microscopy.

Generic drugs are essential for affordable medicine and improving accessibility to treatments. Bioequivalence (BE) is typically demonstrated by assessing a generic product's pharmacokinetics (PK) relative to a reference-listed drug (RLD). Accurately estimating cutaneous PK (cPK) at or near the site of action can be challenging for locally acting topical products. Certain cPK approaches are available for assessing local bioavailability (BA) in the skin. Stimulated Raman scattering (SRS) microscopy has unique capabilities enabling continuous, high spatial and temporal resolution and quantitative imaging of drugs within the skin. In this paper, we developed an approach based on SRS and a polymer-based standard reference for the evaluation of topical product BA and BE in human skin ex vivo. BE assessment of tazarotene-containing formulations was achieved using cPK parameters obtained within different skin microstructures. The establishment of BE between the RLD and an approved generic product was successfully demonstrated. Interestingly, within the constraints of the current study design the results suggest similar BA between the tested gel formulation and the reference cream formulation, despite the differences in the formulation/dosage form. Another formulation containing polyethylene glycol as the vehicle was demonstrated to be not bioequivalent to the RLD. Compared to using the SRS approach without a standard reference, the developed approach enabled more consistent and reproducible results, which is crucial in BE assessment. The abundant information from the developed approach can help to systematically identify key areas of study design that will enable a better comparison of topical products and support an assessment of BE.

Understanding the impact of formulation design on microstructure and drug release from porous microparticle-based tretinoin topical gels.

For proportionally formulated intermediate strengths of a topical product, the relationship of drug release across multiple strengths of a given product is not always well understood. The current study aims to assess the proportionality of tretinoin release rates across multiple strengths of tretinoin topical gels when manufactured using two different methods to understand the impact of formulation design on drug product microstructure and tretinoin release rate. Two groups of tretinoin gels of 0.04 %, 0.06 %, 0.08 % and 0.1 % strengths were manufactured. Gels in Group I were prepared by incorporating 4-10 % g/g of 1 % w/w tretinoin-loaded microparticles into a gel base. Gels in Group II were manufactured using 10 % g/g of the microparticles that were loaded with increasing amounts (0.4-1 % w/w) of tretinoin. The two groups of gels were characterized by evaluating microstructure using a polarized microscope, rheology using an oscillatory rheometer, and drug release using Vison® Microette™ Hanson vertical diffusion cells. The microscopic images were used to discriminate between the two groups of gels based on the abundance of microparticles in the gel matrix observed in the images. This abundance increased across gels of Group I and was similar across gels of Group II. The rheology parameters, namely viscosity at a shear rate of 10 s-1, shear thinning rate, storage, and loss modulus, increased across gels of Group I, and were not significantly different across gels of Group II. The release rate of tretinoin from the drug products was proportional to the nominal strength of the drug product in both Group I and Group II, with a correlation coefficient of 0.95 in each case, although the absolute release rates differed. Overall, changing the formulation design of tretinoin topical gels containing porous microparticles may change the physicochemical and structural properties, as well as the drug release rate of the product. Further, keeping the formulation design consistent across all strengths of microparticle-based topical gels is important to achieve proportional release rates across multiple strengths of a given drug product.

Bioequivalence Evaluation of Topical Metronidazole Products Using Dermal Microdialysis in New Zealand Rabbits.

Comparative assessment of cutaneous pharmacokinetics (cPK) by dermal microdialysis (dMD) appears to be suitable to evaluate the bioequivalence (BE) of topical dermatological drug products applied to the skin (TDDPs). Although dMD studies in the literature have reported inconclusive BE assessments, we have addressed several methodological deficiencies to improve dMD's capability to assess BE between reference (R) and approved generic (referred to as test (T)) gel and cream products of metronidazole (MTZ). The 90% confidence interval (CI) of the geometric mean ratios for the Ln(AUC0-24) and Ln(Cmax) endpoints was centered within the BE limits of 80-125%. The CIs extended outside this range as the proof-of-principle study was not statistically powered to demonstrate BE (N = 7 rabbits). A power analysis suggests that, with the variability observed in this study, 21 rabbits for the cream and 11 rabbits for the gel would be sufficient to support an evaluation of BE with the 2 probe replicates we used, and only 10 and 5 rabbits would be sufficient to power the study for the cream and gel, respectively, if 4 probe replicates are used for each treatment per rabbit. These results indicate that dMD when properly controlling variables can be used to support BE assessments for TDDPs.

Regulatory utility of mechanistic modeling to support alternative bioequivalence approaches: A workshop overview.

On September 30 and October 1, 2021, the US Food and Drug Administration (FDA) and the Center for Research on Complex Generics cosponsored a live virtual workshop titled "Regulatory Utility of Mechanistic Modeling to Support Alternative Bioequivalence Approaches." The overall aims of the workshop included (i) engaging the generic drug industry and other involved stakeholders regarding how mechanistic modeling and simulation can support their product development and regulatory submissions; (ii) sharing the current state of mechanistic modeling for bioequivalence (BE) assessment through case studies; (iii) establishing a consensus on best practices for using mechanistic modeling approaches, such as physiologically based pharmacokinetic modeling and computational fluid dynamics modeling, for BE assessment; and (iv) introducing the concept of a Model Master File to improve model sharing between model developers, industry, and the FDA. More than 1500 people registered for the workshop. Based on a postworkshop survey, the majority of participants reported that their fundamental scientific understanding of mechanistic models was enhanced, there was greater consensus on model validation and verification, and regulatory expectations for mechanistic modeling submitted in abbreviated new drug applications were clarified by the workshop.

Mechanistic modeling of drug products applied to the skin: A workshop summary report.

The development of a generic drug product involves demonstrating that there is no significant difference in the rate and extent to which the active ingredient becomes available at the site of action, relative to the reference listed drug product. This remains challenging for many locally acting topical dermatological products because measuring the concentration of the active ingredient at the site of action in the skin may not be straightforward, and, in most instances, there are no established relationships between skin and plasma pharmacokinetic profiles. In recent years, the Office of Generic Drugs of the US Food and Drug Administration (FDA) established scientific research programs with the goal of enhancing patient access to high quality, affordable topical dermatological generics. A key strategy of these research programs was to leverage modeling and simulation methodologies that accelerate the development of these generics by facilitating alternative bioequivalence approaches for dermatological drug products. This report summarizes relevant insights and discussions from a 2021 FDA public workshop titled "Regulatory Utility of Mechanistic Modeling to Support Alternative Bioequivalence Approaches," which illustrated how mechanistic modeling and simulation approaches can be utilized (and have been used) to inform generic drug product development and regulatory decisions during the assessment of generic drug applications submitted to the FDA.

Multi-phase multi-layer mechanistic dermal absorption (MPML MechDermA) model to predict local and systemic exposure of drug products applied on skin.

Physiologically-based pharmacokinetic models combine knowledge about physiology, drug product properties, such as physicochemical parameters, absorption, distribution, metabolism, excretion characteristics, formulation attributes, and trial design or dosing regimen to mechanistically simulate drug pharmacokinetics (PK). The current work describes the development of a multiphase, multilayer mechanistic dermal absorption (MPML MechDermA) model within the Simcyp Simulator capable of simulating uptake and permeation of drugs through human skin following application of drug products to the skin. The model was designed to account for formulation characteristics as well as body site- and sex- population variability to predict local and systemic bioavailability. The present report outlines the structure and assumptions of the MPML MechDermA model and includes results from simulations comparing absorption at multiple body sites for two compounds, caffeine and benzoic acid, formulated as solutions. Finally, a model of the Feldene (piroxicam) topical gel, 0.5% was developed and assessed for its ability to predict both plasma and local skin concentrations when compared to in vivo PK data.

How Does the Food and Drug Administration Approve Topical Generic Drugs Applied to the Skin?

Approved generic drugs are therapeutically equivalent to a preidentified brand name product and are expected to have the same clinical effect and safety profile when administered to patients under conditions specified in the labeling. Availability of generic topical dermatologic drugs is expected to enhance patient access to such widely used drug products. Assessment of equivalence for a prospective generic product involves a systematic and rigorous comparative evaluation to ensure there is no significant difference in the rate and extent to which the active ingredients become available at the site of action for the prospective generic and corresponding brand name product.

Cutaneous Pharmacokinetic Approaches to Compare Bioavailability and/or Bioequivalence for Topical Drug Products.

The evaluation of bioequivalence (BE) involves comparing the test product to its reference product in a study whose fundamental scientific principles allow inferring of the clinical performance of the products. Several test methods have been discussed and developed to evaluate topical bioavailability (BA) and BE. Pharmacokinetics-based approaches characterize the rate and extent to which an active ingredient becomes available at or near its site of action in the skin. Such methodologies are considered to be among the most accurate, sensitive, and reproducible approaches for determining the BA or BE of a product.

The dose-duration effect on cutaneous pharmacokinetics of metronidazole from topical dermatological formulations in Yucatan mini-pigs.

Dermal microdialysis (dMD) permits the investigation of cutaneous pharmacokinetics (cPK) for topical dermatological drug products (TDDP). dMD involves probe implantation into the dermis and a sample collection system that restricts subjects' movements for the experimental duration. A truncated dose-duration, by TDDP removal at predetermined time-points, may help to adequately characterize the cPK in a relatively short time. The goals of this study were to: assess and compare the dose-duration effect on the dermal exposure of metronidazole (MTZ) containing TDDPs; and characterize MTZ dermal elimination following TDDP application and direct dermal delivery of MTZ utilizing a retrodialysis/microdialysis approach that we termed "dermal infusion." MTZ cream and gel were applied on three Yucatan mini-pigs for dose-durations of 6-hr, 12-hr, or 48-hr. The gel's dermal exposure was similar among the three dose-durations. Conversely, at the 6-hr dose-duration, the cream's dermal exposure was significantly lower than other cream dose-durations while also comparable to the gel. In comparison, the 12-hr and 48-hr cream exposures were not significantly different. Terminal-phase half-live differences between the MTZ TDDP's and dermal-infusion indicate flip/flop cPK. Truncating topical dose-duration may provide a valuable strategy to reduce experimental duration; however, dose-duration must be carefully selected if the goal is to discriminate between formulations.

Physicochemical and structural evaluation of microparticles in tretinoin topical gels.

Drug release from microparticle-based topical gels may affect their bioavailability, safety and efficacy. This work sought to elucidate spatial distribution of the drug within the microparticle matrix and how this impacts the product's critical performance attributes. The purpose of this research was to inform the development of in vitro characterization approaches to support a demonstration of bioequivalence. Drug-free microparticles were loaded with tretinoin or drug-loaded microparticles were separated from purchased Retin-A Micro® (tretinoin) topical gel drug products. The resultant microparticles were analyzed for tretinoin content, drug loading efficiency, morphology, surface topography, surface pore size distribution, particle size distribution and tretinoin release. The solid-state characteristics and chemical interaction of tretinoin with the microparticles were also investigated. Microparticles loaded with tretinoin made in-house and those separated from Retin-A Micro® (tretinoin) topical gel were spherical, polydisperse and free of aggregates. The surface porosity of the microparticles was ∼19.8% with an average pore size of ∼327 nm. Microparticles loaded with tretinoin in-house were smaller in size and exhibited faster drug release than those separated from Retin-A Micro® (tretinoin) topical gel. Tretinoin release was found to increase with an increase in the drug loading. Based on XRD and DSC data, tretinoin was present in an amorphous state. The FTIR spectra indicated a disappearance of carbonyl band of microparticles and shifting of the hydroxyl band of tretinoin due to hydrogen bonding. The extent of drug loading and the solid-state interaction of tretinoin with the microparticles may be critical for drug release. Additional characterization of the drug products is necessary to understand the effect of the factors examined in this work on the bioavailability and efficacy of tretinoin gels.

Application of Confocal Raman Microscopy for the Characterization of Topical Semisolid Formulations and their Penetration into Human Skin Ex Vivo.

PURPOSE: The quality testing and approval procedure for most pharmaceutical products is a streamlined process with standardized procedures for the determination of critical quality attributes. However, the evaluation of semisolid dosage forms for topical drug delivery remains a challenging task. The work presented here highlights confocal Raman microscopy (CRM) as a valuable tool for the characterization of such products. METHODS: CRM, a laser-based method, combining chemically-selective analysis and high resolution imaging, is used for the evaluation of different commercially available topical acyclovir creams. RESULTS: We show that CRM enables the spatially resolved analysis of microstructural features of semisolid products and provides insights into drug distribution and polymorphic state as well as the composition and arrangement of excipients. Further, we explore how CRM can be used to monitor phase separation and to study skin penetration and the interaction with fresh and cryopreserved excised human skin tissue. CONCLUSION: This study presents a comprehensive overview and illustration of how CRM can facilitate several types of key analyses of semisolid topical formulations and of their interaction with their biological target site, illustrating that CRM is a useful tool for research, development as well as for quality testing in the pharmaceutical industry.

Evaluation of in vitro/in vivo correlations for three fentanyl transdermal delivery systems using in vitro skin permeation testing and human pharmacokinetic studies under the influence of transient heat application.

The value of developing an in vitro/in vivo correlation (IVIVC) is substantial in biopharmaceutical drug development because once the model is developed and validated, an in vitro method may be used to efficiently assess and predict drug product performance in vivo. In this study, three bioequivalent, matrix-type, fentanyl transdermal delivery systems (TDS) were evaluated in vitro using an in vitro permeation test (IVPT) and dermatomed human skin, and in vivo in human pharmacokinetic (PK) studies under harmonized study designs to evaluate IVIVC. The study designs included 1 h of transient heat application (42 ± 2°C) at either 11 h or 18 h after TDS application to concurrently investigate the influence of heat on drug bioavailability from TDS and the feasibility of IVPT to predict the effects of heat on TDS in vivo. Level A (point-to-point) and Level C (single point) IVIVCs were evaluated by using PK-based mathematical equations and building IVIVC models between in vitro fraction of drug permeation and in vivo fraction of drug absorption. The study results showed that the three differently formulated fentanyl TDS have comparable (p > 0.05) heat effects both in vitro and in vivo. In addition, the predicted steady-state concentration (Css) from in vitro flux data and the observed Css in vivo showed no significant differences (p > 0.05). However, the effects of heat on enhancement of fentanyl bioavailability observed in vivo were found to be greater compared to those observed in vitro for all three drug products, resulting in a weak prediction of the impact of heat on bioavailability from the in vitro data. The results from the current work suggest that while IVPT can be a useful tool to evaluate the performance of fentanyl TDS in vivo with a relatively good predictability at a normal temperature condition and to compare the effect of heat on drug delivery from differently formulated TDS, additional testing measures would enhance the ability to predict the heat effects in vivo with a lower prediction error.

Research and Education Needs for Complex Generics.

Complex generics are generic versions of drug products that generally have complex active ingredients, complex formulations, complex routes of delivery, complex dosage forms, are complex drug-device combination products, or have other characteristics that can make it complex to demonstrate bioequivalence or to develop as generics. These complex products (i.e. complex generics) are an important element of the United States (U.S.) Food and Drug Administration's (FDA's) Generic Drug User Fee Amendments (GDUFA) II Commitment Letter. The Center for Research on Complex Generics (CRCG) was formed by a grant from the FDA to address challenges associated with the development of complex generics. To understand these challenges, the CRCG conducted a "Survey of Scientific Challenges in the Development of Complex Generics". The three main areas of questioning were directed toward which (types of) complex products, which methods of analysis to support a demonstration of bioequivalence, and which educational topics the CRCG should prioritize. The survey was open to the public on a website maintained by the CRCG. Regarding complex products, the top three selections were complex injectables, formulations, and nanomaterials; drug-device combination products; and inhalation and nasal products. Regarding methods of analysis, the top three selections were locally-acting physiologically-based pharmacokinetic modeling; oral absorption models and bioequivalence; and data analytics and machine learning. Regarding educational topics, the top three selections were complex injectables, formulations, and nanomaterials; drug-device combination products; and data analytics, including quantitative methods and modeling & simulation. These survey results will help prioritize the CRCG's initial research and educational initiatives.

Comparative in vitro release testing (IVRT) of acyclovir products.

The aim was to evaluate whether an in vitro release test (IVRT) could differentiate the release rates from five pharmaceutically equivalent acyclovir cream products and one ointment compared to that from a reference product, Zovirax cream (USA), to identify a test product with an inequivalent drug release rate that could serve as negative control for bioequivalence (BE) in a separate in vivo study. The reference product showed equivalent drug release rates compared to itself. The six test products failed to show equivalent drug release rates compared to the reference product. Aciclovir 1A pharma cream was selected to serve as a negative control for subsequent BE studies, since it exhibited the greatest difference in release rate among all creams, compared to the reference product. The results of this study indicate that IVRT results can be highly sensitive and may discriminate clinically relevant differences between products. Results from an appropriately validated IVRT method can support a demonstration of BE by showing that the drug release rates from test and reference products are statistically equivalent, mitigating the risk that differences may exist between the products which may influence in vivo performance of the drug product.

Relating transdermal delivery plasma pharmacokinetics with in vitro permeation test (IVPT) findings using diffusion and compartment-in-series models.

Increasing emphasis is being placed on using in vitro permeation test (IVPT) results for topical products as a surrogate for their in vivo behaviour. This study sought to relate in vivo plasma concentration - time pharmacokinetic (PK) profiles after topical application of drug products to IVPT findings with mechanistic diffusion and compartment models that are now widely used to describe permeation of solutes across the main skin transport barrier, the stratum corneum. Novel in vivo forms of the diffusion and compartment-in-series models were developed by combining their IVPT model forms with appropriate in vivo disposition functions. Available in vivo and IVPT data were then used with the models in data analyses, including the estimation of prediction intervals for in vivo plasma concentrations derived from IVPT data. The resulting predicted in vivo plasma concentration - time profiles for the full models corresponded closely with the observed results for both nitroglycerin and rivastigmine at all times. In contrast, reduced forms of these in vivo models led to discrepancies between model predictions and observed results at early times. A two-stage deconvolution procedure was also used to estimate the in vivo cumulative amount absorbed and shown to be linearly related to that from IVPT, with an acceptable prediction error. External predictability was also shown using a separate set of in vitro and in vivo data for different nitroglycerin patches. This work suggests that mechanistic and physiologically based pharmacokinetic models can be used to predict in vivo behaviour from IVPT data for topical products.

Evaluation of local bioavailability of metronidazole from topical formulations using dermal microdialysis: Preliminary study in a Yucatan mini-pig model.

Dermal microdialysis (dMD) can measure the rate and extent to which a topically administered active pharmaceutical ingredient (API) becomes available in the dermis. Using multiple test-sites on the same subject, and replicate probes at each test-site, it is feasible to compare the cutaneous pharmacokinetics of an API from different topical dermatological drug products in parallel on the same subject with this technique. This study design would help to reduce variability. However, there are technical considerations related to the dMD experimental methods that must be characterized and optimized to ensure that an in vivo dMD study is selective, sensitive, discriminating, and reproducible. The goals of this study were to assess: the minimum distance required between test-sites to prevent cross-talk between probes due to potential lateral-diffusion; the sensitivity of the dMD method to detect differences in the local concentration of metronidazole (MTZ) among single escalating doses; the ability to discriminate between the two different formulations; and the stability of the dMD-probes over 48 h. Results indicate that lateral-diffusion and systemic redistribution of the API following topical application of the drug product were negligible, thus MTZ measured by dMD can be selectively attributed to the dermal bioavailability of the API from the applied topical dose. The dMD methodology was able to detect differences in the bioavailability of MTZ from the cream compared to the gel when applied at the same dose, as well as among different doses of the same formulation over a 48-hour sampling duration; therefore, the method is sensitive. The percentage loss of D3-MTZ from the probe compared to its original concentration in the perfusate indicates that the probe performance was stable over the 48 h.